4
FUNCTIONAL DESCRIPTION
1. Drive shank
2. Forward/reverse switch
(9072-20, 9072-22, 9092-20, 9096-20)
3. Trigger
(9072-20, 9072-22, 9092-20, 9096-20)
Rocker switch
(9070-20, 9071-20, 9075-20)
4. Speed control dial
(9072-20, 9072-22, 9092-20, 9096-20)
5. Handle
6. Quik-Lok
®
cord
(9072-20, 9072-22, 9092-20, 9096-20)
7. Quick change chuck
(9092-20, 9096-20)
8. Tool hanger
(9092-20, 9096-20)
9. Tool hanger ring
(9092-20, 9096-20)
Cat. No.
9072-20,
9072-22
Cat. No. 9092-20 Cat. No. 9075-20
7
8
9
3
1
2
3
4
5
6
ASSEMBLY
To reduce the risk of injury, always
unplug tool before changing or
removing accessories. Only use accessories
specically recommended for this tool. Others
may be hazardous.
Removing and Replacing Quik-Lok
®
Cords
(Cat. No. 9072-20, 9072-22, 9092-20 and 9096-20)
MILWAUKEE's exclusive Quik-Lok
®
Cords provide
instant eld replacement or substitution.
1. To remove the Quik-Lok
®
Cord, turn the cord nut
1/4 turn to the left and pull it out.
2. To replace the Quik-Lok
®
Cord, align the connector
keyways and push the connector in as far as it will
go. Turn the cord nut 1/4 turn to the right to lock.
SPECIFICATIONS
Volts .............................................................120 AC
Amps .....................................................................7
Cat. No. ..................................................... 9070-20
No Load RPM ..................................................1800
Drive Shaft ........................................................ 1/2"
Impacts per Minute ..........................................2600
Average Torque ........................................300 ft-lbs
Cat. No. ..................................................... 9071-20
No Load RPM ..................................................1800
Drive Shaft ........................................................ 1/2"
Impacts per Minute ..........................................2600
Average Torque ........................................300 ft-lbs
Cat. No. ..................................................... 9072-20
No Load RPM .......................................... 600-1800
Drive Shaft ........................................................ 1/2"
Impacts per Minute ................................ 1000-2600
Average Torque .................................100-300 ft-lbs
Cat. No. ..................................................... 9072-22
No Load RPM .......................................... 600-1800
Drive Shaft ........................................................ 1/2"
Impacts per Minute ................................ 1000-2600
Average Torque .................................100-300 ft-lbs
Cat. No. ..................................................... 9075-20
No Load RPM ..................................................1800
Drive Shaft ........................................................ 3/4"
Impacts per Minute ..........................................2500
Average Torque ........................................380 ft-lbs
Cat. No. ..................................................... 9092-20
No Load RPM .......................................... 600-1800
Drive Shaft ...............................................1/16" Hex
Impacts per Minute ................................ 1000-2600
Average Torque .................................100-315 ft-lbs
Cat. No. ..................................................... 9096-20
No Load RPM .......................................... 600-1800
Drive Shaft .................................................5/8" Hex
Impacts per Minute ................................ 1000-2600
Average Torque .................................100-315 ft-lbs
QUICK CHANGE CHUCK CAPACITIES*
Cat. No. ..................................................... 9070-20
Quick Change Auger Bits .............................. 1-1/2"
Selfeed Bits ................................................. 2-9/16"
Cat. No. ..................................................... 9072-20
Quick Change Auger Bits .............................. 1-1/2"
Selfeed Bits ................................................. 2-9/16"
Cat. No. ..................................................... 9072-22
Quick Change Auger Bits .............................. 1-1/2"
Selfeed Bits ................................................. 2-9/16"
Cat. No. ..................................................... 9092-20
Quick Change Auger Bits .............................. 1-1/2"
Selfeed Bits ................................................. 2-9/16"
Cat. No. ..................................................... 9076-20
Quick Change Auger Bits .............................. 1-1/2"
Selfeed Bits ................................................. 2-9/16"
*Only for use with the 7/16" or 5/8" Hex Quick Change
chuck, standard equipment on the 9092-20 (7/16")
and 9096-20 (5/8"), optional accessory (Cat. No.
48-66-0061) on other models.
Join the conversation about this product
Here you can share what you think about the Milwaukee 9070-20 Impact Wrench. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.