Home > Garden & Terrace > Hedgecutters > Makita Hedgecutters > Makita UH6330 Hedgecutter

Manual Makita UH6330 Hedgecutter

Need a manual for your Makita UH6330 Hedgecutter? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Thank you for purchasing a MAKITA product!

Congratulations on choosing a MAKITA hedge trimmer!

We are confident that you will be satisfied with this modern

machine.

Models UH 4030, UH 4830, UH 5530 and UH 6330 are very

light and handy hedge trimmers, with high performance and

a good power-to-weight ratio.

The ergonomic design of the grips and controls make for

comfortable and untiring operation during extensive jobs. A

strain reliever is provided for the power cord at both ends.

The safety features of the UH 4030, UH 4830, UH 5530 and

UH 6330 hedge trimmers are state of the art and meet all

international standards. These features include hand guards

on both handles, 2-hand grip safeties and a quick-stop function.

In order to ensure the proper functioning and performance

of your new hedge trimmer, and to safeguard your own

personal safety, it is imperative that you read this instruc-

tion manual thoroughly before operation. Be especially

careful to observe all safety precautions! Failure to ob-

serve these precautions can lead to severe injury or

death!

Table of contents

EU Conformity Declaration................................................2

Packaging ............................................................................2

Symbols ...............................................................................2

Delivery inventory ..............................................................3

SAFETY PRECAUTIONS ....................................................3

General precautions........................................................3

Protective equipment ......................................................3

Putting into operation.................................................. 3-4

Extension power cord .....................................................4

Transport and storage ....................................................4

Maintenance....................................................................4

First aid ...........................................................................4

Working technique ..........................................................5

Tips on hedge-trimming.....................................................5

Environmental protection information.............................5

Technical data.....................................................................6

Designation of components ..............................................6

PUTTING INTO OPERATION..............................................7

Checking the blade brake ..............................................7

MAINTENANCE ...................................................................7

Cleaning and maintaining the cutter ...............................7

Instructions for periodic maintenance.............................7

Trouble shooting ................................................................7

Service, spare parts and guarantee .................................8

Service centres (see enclosure)

EU Conformity Declaration

The undersigned, Junzo Asada and Rainer Bergfeld, as

authorized by DOLMAR GmbH, declare that the MAKITA

machines,

Type: UH 4030, UH 4830, UH 5530, UH 6330

manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045

Hamburg, Germany, conforms to the basic safety and health

requirements of the applicable EU guidelines:

EU Machine guideline 98/37/ EG

EU EMC guideline 89/336/ EWG (modified by 91/263/ EWG,

92/31/ EWG and 93/68/ EWG)

EU Low-voltage guideline 73/23/ EWG (modified by 93/68/

EWG)

The most important standards applied to properly meet the

requirements of the above EU guidelines were: EN 50144-1,

EN 50144-2-15, EN 55104, EN 55014, EN 61000-3-T2/-T3.

Hamburg, 6.12.1999

For DOLMAR GmbH

Junzo Asada Rainer Bergfeld

Managing Director Managing Director

Symbols

You will notice the following symbols on the hedge trimmer

and in the Instruction Manual:

Packaging

Your MAKITA hedge trimmer is delivered in a cardboard box

to protect it during shipping.

Cardboard is a basic raw material and is consequently

reuseable or suitable for recycling (waste paper recycling).

RE Y

STOP

RE Y

Read Instruction Manual and follow

all warnings and safety instructions!

Particular care and attention!

Forbidden!

Protect from rain and moisture!

Pull mains plug if power cord is damaged!

Pull mains plug!

Double protective insulation

Switch off motor!

Wear protective gloves!

Wear eye and hearing protection!

First aid

Recycling

CE-marking

Rating

Let us know what you think about the Makita UH6330 Hedgecutter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Makita UH6330 Hedgecutter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Makita UH6330 Hedgecutter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Makita UH6330 Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Makita. They might be able to provide an original manual. Are you looking for the manual of your Makita UH6330 Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Makita
Model	UH6330
Category	Hedgecutters
File type	PDF
File size	1.58 MB

All manuals for Makita Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about Makita UH6330 Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I know my hedgecutter is blunt? Verified

When branches are being pulled instead of cut, the hedgecutter is blunt and needs to be sharpened.

This was helpful (290) Read more

How do I sharpen my hedgecutter blades? Verified

Sharpening your hedgecutter blades is important for maintaining the performance and efficiency of the tool. To sharpen the blades, you will need a file or sharpening stone specifically designed for the type of blade on your hedgecutter.

This was helpful (197) Read more

How do I lubricate my hedgecutter blades? Verified

Lubricating your hedgecutter blades will help to reduce friction and wear, prolonging the life of the tool. Use a high-quality lubricating oil specifically designed for hedgecutters and apply a small amount to the blades after each use.

This was helpful (91) Read more

How can I prevent rust from forming on my hedgecutter blades? Verified

Rust can cause damage to your hedgecutter blades, reducing their performance and lifespan. To prevent rust, clean and dry the blades thoroughly after each use and store them in a dry, clean place. You can also consider applying a protective coating, such as oil or a rust inhibitor, to the blades before storing them.

This was helpful (55) Read more