Manual Makita UB120D Leaf Blower

Need a manual for your Makita UB120D Leaf Blower? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

4
9. Do not charge inside a box or container of any
kind. The battery must be placed in a well venti-
lated area during charging.
ADDITIONAL SAFETY RULES
FOR TOOL
ENB032-1
1. Be aware that this tool is always in an operating
condition, because it does not have to be
plugged into an electrical outlet.
2. Always use protective goggles, a cap and mask
when using the blower.
3. Never point the nozzle at anyone in the vicinity
when using the blower.
4. Always use the dust bag when collecting dust,
chips and the like.
5. Do not collect still smoldering cigarette ashes,
freshly cut metals shavings, screws, nails and
the like.
6. Never block suction inlet and/or blower outlet.
Increased motor revolution may cause danger-
ous fan breakage.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Installing or removing battery cartridge (Fig. 1)
Always switch off the tool before insertion or removal of
the battery cartridge.
• To remove the battery cartridge, withdraw it from the
tool while pressing the push buttons on both sides of
the cartridge.
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click. If not, it may accidentally fall out
of the tool, causing injury to you or someone around
you.
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Charging (Fig. 2)
Plug the battery charger into the proper A/C voltage source. The charging light will flash in green color. Insert the bat-
tery cartridge so that the plus and minus terminals on the battery cartridge are on the same sides as their respective
markings on the battery charger. Insert the cartridge fully into the port so that it rests on the charger port floor. When
the battery cartridge is inserted, the charging light color will change from green to red and charging will begin. The
charging light will remain lit steadily during charging. When the charging light color changes from red to green, the
charging cycle is complete. If you leave the battery cartridge in the charger after the charging cycle is complete, the
charger will switch into its “trickle charge (maintenance charge)” mode which will last approximately 24 hours. After
charging, unplug the charger from the power source. Refer to the table below for the charging time.
CAUTION:
The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufac-
turer’s batteries.
When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it
may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the bat-
tery cartridge fully after discharging it completely and recharging a couple of times.
If you charge a battery cartridge from a just-operated tool or a battery cartridge which has been left in a location
exposed to direct sunlight or heat for a long time, the charging light may flash in red color. If this occurs, wait for a
while. Charging will begin after the battery cartridge cools. The battery cartridge will cool faster if you remove the
battery cartridge from the battery charger.
If the charging light flashes alternately in green and red color, a problem exists and charging is not possible. The ter-
minals on the charger or battery cartridge are clogged with dust or the battery cartridge is worn out or damaged.
Trickle charge (Maintenance charge)
If you leave the battery cartridge in the charger to prevent spontaneous discharging after full charge, the charger will
switch into its “trickle charge (maintenance charge)” mode and keep the battery cartridge fresh and fully charged.
Battery type Capacity (mAh) Number of cells Charging time
1222 2,000 10 Approx. 45 min.
1233 2,200 10 Approx. 50 min.
1234 2,600 10 Approx. 60 min.
1235 3,000 10 Approx. 70 min.
1422 2,000 12 Approx. 45 min.
1433 2,200 12 Approx. 50 min.
1434 2,600 12 Approx. 60 min.
1435 3,000 12 Approx. 70 min.
Download manual in English (PDF, 0.75 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Makita UB120D Leaf Blower by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Makita UB120D Leaf Blower?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Makita UB120D Leaf Blower. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Makita UB120D Leaf Blower. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Makita. They might be able to provide an original manual. Are you looking for the manual of your Makita UB120D Leaf Blower in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Makita
Model UB120D
Category Leaf Blowers
File type PDF
File size 0.75 MB

All manuals for Makita Leaf Blowers
More manuals of Leaf Blowers

Manual Makita UB120D Leaf Blower

Related products

Related categories

×
Download