Home > Garden & Terrace > Hedgecutters > Makita Hedgecutters > Makita HTR7610 Hedgecutter

Manual Makita HTR7610 Hedgecutter

Need a manual for your Makita HTR7610 Hedgecutter? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

FUELS/REFUELLING

Fuel and oil mixture

– The engine of the hedge Trimmer is a high-efficiency two-stroke

engine.

It is run with a mixture of fuel and two-stroke engine oil. The engine

is designed for unleaded regular fuel with a min. octane value of 91

RON.

In case no such fuel is available, you can use fuel with a higher

octane value. This will not damage the engine, but may cause poor

operating behaviour.

A similar situation will arise from the use of leaded fuel.

To obtain optimum engine operation and to protect your health and

the environment, only unleaded fuel should be used!

– For lubricating the engine use a two-stroke engine oil (quality

grade:TSC-3), which is added to the fuel.

The engine has been designed for use with MAKITA two-stroke

engine oil and a mixture ratio of 50:1 only to protect the environment.

In addition, a long service life and a reliable operation with a

minimum emission of exhaust gases is guaranteed. It is absolutely

essential to observe a mixture ratio of 50:1 (MAKITA 2-stroke engine

oil), otherwise the reliable function of the Hedge Trimmer cannot be

guaranteed.

– The correct mixture ratio:

Mix 50 parts gasoline with 1 part MAKITA 2-stroke engine oil (See

table on the right)

NOTE:

For preparing the fuel-oil mixture, first mix the entire oil

quantity with half of the fuel required. In an approved can

which meets of exceeds all local code standards, then add the

remaining fuel.

Thoroughly shake the mixture before filling it into the Hedge

Trimmer’s tank.

It is not wise to add more engine oil than specified to ensure

safe operation. It will only result in a higher production of

combustion residues which will pollute the environment and

clog the exhaust channel in the cylinder as well as the muffler.

In addition, the fuel consumption will rise and the performance

will decrease.

Handling petroleum products

Utmost care is required when handling fuel. Fuel may contain

substances similar to solvents. Refuel either in a well ventilated area or

outdoors. Do not inhale fuel vapors, avoid any contact of fuel or oil with

your skin.

If your skin comes in contact with these substances repeatedly and for

an extended period of time, it will desiccate.

Various skin diseases may result. In addition, allergic reactions are

known to occur.

Eyes can be irritated by contact with oil, fuel etc.

If oil, fuel, etc., comes into your eyes, immediately wash them with clear

water. If your eyes are still irritated, see a doctor immediately!

Observe the Safety Instructions on page 4

Gasoline 50:1

1,000cm

(1 liter)

20cm

5,000cm

(5liters) 100cm

10,000cm

(10liters) 200cm

Download manual in English (PDF, 1.53 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Makita HTR7610 Hedgecutter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Makita HTR7610 Hedgecutter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Makita HTR7610 Hedgecutter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Makita HTR7610 Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Makita. They might be able to provide an original manual. Are you looking for the manual of your Makita HTR7610 Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Makita
Model	HTR7610
Category	Hedgecutters
File type	PDF
File size	1.53 MB

All manuals for Makita Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about Makita HTR7610 Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I know my hedgecutter is blunt? Verified

When branches are being pulled instead of cut, the hedgecutter is blunt and needs to be sharpened.

This was helpful (345) Read more

How do I sharpen my hedgecutter blades? Verified

Sharpening your hedgecutter blades is important for maintaining the performance and efficiency of the tool. To sharpen the blades, you will need a file or sharpening stone specifically designed for the type of blade on your hedgecutter.

This was helpful (299) Read more

How do I lubricate my hedgecutter blades? Verified

Lubricating your hedgecutter blades will help to reduce friction and wear, prolonging the life of the tool. Use a high-quality lubricating oil specifically designed for hedgecutters and apply a small amount to the blades after each use.

This was helpful (147) Read more

How can I prevent rust from forming on my hedgecutter blades? Verified

Rust can cause damage to your hedgecutter blades, reducing their performance and lifespan. To prevent rust, clean and dry the blades thoroughly after each use and store them in a dry, clean place. You can also consider applying a protective coating, such as oil or a rust inhibitor, to the blades before storing them.

This was helpful (90) Read more