Home > Garden & Terrace > Hedgecutters > Makita Hedgecutters > Makita DUH507 Hedgecutter

Manual Makita DUH507 Hedgecutter

Need a manual for your Makita DUH507 Hedgecutter? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

10 ENGLISH

Maintenance and storage

1. 󰀨

cartridge before doing any maintenance work.

2. When moving the tool to another location,

including during work, always remove the

battery cartridge and put the blade cover on

the shear blades. Never carry or transport the

tool with the blades running. Never grasp the

blades with your hands.

3. Clean the tool and especially the shear blades

after use, and before putting the tool into stor-

age for extended periods. Lightly oil the blades

and put on the blade cover.

4. Store the tool with the blade cover on, in a dry

room. Keep it out of reach of children. Never

store the tool outdoors.

5. 

cell may explode. Check with local codes for

possible special disposal instructions.

6. Do not open or mutilate the battery(ies).

Released electrolyte is corrosive and may

cause damage to the eyes or skin. It may be

toxic if swallowed.

7. Do not charge battery in rain, or in wet

locations.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble or tamper with the battery

cartridge.

or explosion.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current



breakdown.

6. Do not store and use the tool and battery car-

tridge in locations where the temperature may

reach or exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn



8. Do not nail, cut, crush, throw, drop the battery

cartridge, or hit against a hard object to the

battery cartridge. Such conduct may result in a



9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.

󰀨

battery in such a manner that it cannot move

around in the packaging.

11. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe

place. Follow your local regulations relating to

disposal of battery.

12. Use the batteries only with the products

 Installing the batteries to

-

sive heat, explosion, or leak of electrolyte.

13. If the tool is not used for a long period of time,

the battery must be removed from the tool.

14. During and after use, the battery cartridge may

take on heat which can cause burns or low

temperature burns. Pay attention to the han-

dling of hot battery cartridges.

15. Do not touch the terminal of the tool imme-

diately after use as it may get hot enough to

cause burns.

16. Do not allow chips, dust, or soil stuck into the

terminals, holes, and grooves of the battery

cartridge.

burst and malfunction of the tool or battery car-



17. Unless the tool supports the use near

high-voltage electrical power lines, do not use

the battery cartridge near high-voltage electri-

cal power lines. It may result in a malfunction or

breakdown of the tool or battery cartridge.

18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting



also void the Makita warranty for the Makita tool and

charger.

Download manual in English (PDF, 15.47 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Makita DUH507 Hedgecutter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Makita DUH507 Hedgecutter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Makita DUH507 Hedgecutter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Makita DUH507 Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Makita. They might be able to provide an original manual. Are you looking for the manual of your Makita DUH507 Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Makita
Model	DUH507
Category	Hedgecutters
File type	PDF
File size	15.47 MB

All manuals for Makita Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about Makita DUH507 Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I know my hedgecutter is blunt? Verified

When branches are being pulled instead of cut, the hedgecutter is blunt and needs to be sharpened.

This was helpful (346) Read more

How do I sharpen my hedgecutter blades? Verified

Sharpening your hedgecutter blades is important for maintaining the performance and efficiency of the tool. To sharpen the blades, you will need a file or sharpening stone specifically designed for the type of blade on your hedgecutter.

This was helpful (299) Read more

How do I lubricate my hedgecutter blades? Verified

Lubricating your hedgecutter blades will help to reduce friction and wear, prolonging the life of the tool. Use a high-quality lubricating oil specifically designed for hedgecutters and apply a small amount to the blades after each use.

This was helpful (147) Read more

How can I prevent rust from forming on my hedgecutter blades? Verified

Rust can cause damage to your hedgecutter blades, reducing their performance and lifespan. To prevent rust, clean and dry the blades thoroughly after each use and store them in a dry, clean place. You can also consider applying a protective coating, such as oil or a rust inhibitor, to the blades before storing them.

This was helpful (90) Read more