Manual Logik LBSET11 Kettle

Manual

GB-1 GB-2 GB-3

UNPACKING

Remove all packaging from the unit. Retain the packaging. If you dispose of it

please do so according to local regulations.

The following items are included:

FILLING THE KETTLE

Slide the open switch to open the lid and ll the kettle with the required amount of

water.

Do not exceed the maximum ll level (Max 1.7L) as indicated inside the kettle and not

less than the minimum ll level (Min 0.5L).

SWITCHING ON

Place the kettle on the stand. Connect the stand’s mains cable to the mains socket.

Press the power switch to the ON position (indicated by the symbol ‘I’).

The indicator at the bottom of the water ll level will light up to indicate that the

kettle is heating.

CLEANING THE KETTLE

The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive

cleaners or scouring pads which may damage the nish of the kettle.

Never immerse the kettle or the stand in water and always keep the electrical

contacts dry. Always disconnect from the mains before cleaning the stand.

DESCALING THE KETTLE

Depending on the hardness of the water

in your area, limescale may be deposited

on the heating element and the inside of

the kettle. This normal build-up is not

harmful to health but an excessive

amount of scale may affect the

performance of the kettle.

To descale, ll the kettle with distilled

water up to three-quarters of the Max

level and bring the water to boil. After the

kettle has switched off, add a descaling

solution following the manufacturers

instructions. Never attempt to descale the

kettle by chipping or scraping with a

sharp implement.

CLEANING THE REMOVABLE SCALE FILTER

To prevent loose particles of limescale

being poured into your beverage, your

kettle is tted with a scale lter. You may

remove the lter and t it back in after

cleaning.

To remove the lter, open the lid, lift up

the lter from the bracket at the spout.

To t in the lter, open the lid, place the

lter inside the bracket at the spout and

push it down till it ts in place.

FIRST TIME USE

Clean your kettle by boiling a full kettle of water twice and then discarding the

water.

KEEPING THE MAINS CABLE TIDY

Extend the mains cable in the kettle stand to

the required length. Locate the mains cable in

the slot in the stand. For safety it is

recommended that the length of exposed

mains cable is kept as short as possible.

PRODUCT OVERVIEW

• Kettle

Kettle Stand

Open Switch

Lid

Spout

Handle

Water Fill Level

Power Switch

Mains Cable

Do not insert any foreign objects or allow any liquid to spill into the

Power Connector Hole.

If the kettle is overlled, boiling

water may be ejected from the

spout and cause scalding.

• Never open the lid while the

water is boiling. The steam

coming out from the kettle is very

hot.

• If there is insufficient water in the

kettle, the automatic safety

cut-out will operate. If this

happens, allow the kettle to cool

for ten minutes before relling

with cold water and re-boiling.

This kettle must only be used with

the stand provided.

WHEN THE WATER HAS BOILED

The kettle will automatically switch off (indicated by the symbol ‘0’ ).

• Ensure that the switch is not

obstructed and the lid is rmly

closed. The kettle will not turn

o if the switch is obstructed

or if the lid is open.

• After removing the kettle,

there may be some water on

the surface of the stand. This is

condensation from the steam

that causes the kettle to

automatically switch off after

boiling. This is normal and

should not be a cause for

alarm.

Power Connector Hole

90˚

Indicator

slot

Breakfast Set-Kettle

Instructi on Manual

LBSET11

Thank y ou for purchasing your new Lo gik Breakfas t Set.

We recommend th at you spen d some time reading thi s instructi on manual

in order to fully under stand all th e operation al features it offers.

Read all the safety ins tructions c arefully bef ore use and keep this

instruction manual for future refere nce.

• Toaster

cancel

1

2

3

4

5

6

reheat

defrost

Breakfast Set-Toaster

Instructi on Manual

LBSET11

Thank y ou for purchasing your new Lo gik Breakfas t Set.

We recommend th at you spen d some time reading thi s instructi on manual

in order to fully under stand all th e operation al features it offers.

Read all the safety ins tructions c arefully bef ore use and keep this

instruction manual for future refere nce.

• Instruction Manual

for Toaster

(P.N.: LBSET11T-001)

• Instruction Manual

for Kettle

(P.N.: LBSET11K-001)

LBSET11_IB_kettle_110217.pdf 2 2/17/11 2:14 PM

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Logik LBSET11 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Logik. They might be able to provide an original manual. Are you looking for the manual of your Logik LBSET11 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Logik Kettles
More manuals of Kettles

Frequently Asked Questions about Logik LBSET11 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Logik L17KBS11 Kettle

Manual

Logik L17SKBU21 Kettle

Manual

Logik L17PKB21 Kettle

Manual

Logik L17PKG13 Kettle

Manual

Logik L14KBS15E Kettle

Manual

Logik L17JKB10 Kettle

Manual

Logik L17PKBU13 Kettle

Manual

Logik L17JKB13 Kettle

Related categories