Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 9909OZLED Mount Lamp

Manual Kichler 9909OZLED Mount Lamp

Need a manual for your Kichler 9909OZLED Mount Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

1) TURN OFF POWER.

IMPORTANT: Before you start, NEVER attempt any work

without shutting off the electricity until the work is done.

a) Go to the main fuse, or circuit breaker, box in your

home. Place the main power switch in the “OFF” position.

b) Unscrew the fuse(s), or switch “OFF” the circuit breaker

switch(s), that control the power to the ﬁxture or room

that you are working on.

c) Place the wall switch in the “OFF” position. If the ﬁxture

to be replaced has a switch or pull chain, place those in

the “OFF” position.

5) Slip ﬁxture over post and mark position of mounting holes in

post.

6) Remove ﬁxture from post.

7) Drill 3/16” dia holes in post at positions marked .

8) If ﬁxture is provided with ground wire, connect ﬁxture

ground wire to outlet box ground wire with wire connector.

(Not provided). Never connect ground wire to black or white

power supply wires.

9) Make wire connections (connectors not provided). Reference

chart below for correct connections and wire accordingly.

10) Slip ﬁxture over post and secure in place using provided

screws. Screws should slip into holes drilled in post.

11) Thread top trim onto coupling on top of ﬁxture.

1) COUPER L’ALIMENTATION SECTEUR.

IMPORTANT: TOUJOURS couper l’électricité avant de

commencer le travail.

a) Localiser le coffret à fusibles ou le disjoncteur du

domicile. Mettre l’interrupteur principal en position

d’Arrêt.

b) Dévisser le ou les fusibles (ou mettre le disjoncteur sur

Arrêt) qui contrôlent l’alimentation vers le luminaire ou la

pièce dans laquelle le travail est effectué.

c) Mettre l’interrupteur mural en position d’Arrêt. Si le luminaire

à remplacer est doté d’un interrupteur ou d’une chaîne

connectée à l‘interrupteur, placer ces éléments en

position d’Arrêt.

5) Passer le luminaire par dessus le support et marquer un

repère pour les trous de montage sur le support.

6) Enlever le luminaire du support.

7) Percer des trous de 1/8 po sur chacun des repères du

support.

8) Si luminaire est fourni a vec un ﬁl de mise à la terre, le

connecter à la boîte de sortie de courant de mise à la terre

avec un serre-ﬁls (non fourni). Ne jamais connecter un ﬁl de

mise à la terre aux ﬁls d’alimentation noir ou blanc.

9) Connecter les ﬁls (connecteurs non fournis). Se porter au

tableau ci-dessous pour faire les connexions.

10) Faire glisser le luminaire sur le support et ﬁxer à l’aide des

vis. Les vis doivent s’ajuster correctement dans les trous du

support.

11) Visser la garniture supérieure sur l’accouplement sur le

dessus du luminaire.

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Date Issued: 3/14/14 IS-9909LED-CB

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

FIXTURE

LUMINAIRE

SCREW

VIS

COUPLING

ACCOUPLEMENT

Connecter le fil noir ou

rouge de la boite

Connecter le fil blanc de la boîte

A Noir A Blanc

*Au cordon parallèle (rond et lisse)

*Au cordon parallele (à angles droits el strié)

Au bransparent, doré, marron, ou

noir sans fil distinctif

Au transparent, doré, marron, ou

noir avec un til distinctif

Fil isolé (sauf fil vert) avec

conducteur en cuivre

Fil isolé (sauf fil vert) avec

conducteur en argent

*Remarque: Avec emploi d’un fil paralléle

(SPT I et SPT II). Le fil neutre est á angles

droits ou strié et l’autre fil doit étre rond ou

lisse (Voir le schéma).

Fil Neutre

TOP TRIM

GARNITURE SUPÉRIEURE

Rating

Let us know what you think about the Kichler 9909OZLED Mount Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 9909OZLED Mount Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 9909OZLED Mount Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 9909OZLED Mount Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 9909OZLED Mount Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	9909OZLED Mount
Category	Lamps
File type	PDF
File size	0.1 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 9909OZLED Mount Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (495) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (355) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (288) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (228) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (172) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (149) Read more