Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 9246WH Cylinder Lamp

Manual Kichler 9246WH Cylinder Lamp

Need a manual for your Kichler 9246WH Cylinder Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Pour de plus amples informaons sur la garane, veuillez visiter : kichler.com/warranty

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or

main fusebox before starting and during the installation.

WARNING:

This xture is intended for installation in accordance

with the National Electrical Code (NEC) and all local

code specications. If you are not familiar with code

requirements, installation by a certied electrician is

recommended.

INSTRUCTIONS FOR MOUNTING FIXTURE OUTDOORS

AND/OR IN WET LOCATIONS:

1) Mounting surface should be clean, dry, ﬂat and 1/4”

larger than the canopy on all sides. Any gaps between

the mounting surface and canopy exceeding 3/16”

should be corrected as required.

2) With silicone caulking compound, caulk completely

around where back of canopy meets the wall surface to

prevent water from seeping into outlet box.

3) The uplight lens accessory must be in place for all

wet or outdoor locations (sold separately).

• This lighting xture is suitable for indoor or outdoor

use, dry, damp or wet locations.

CLEANING: Always be certain that electric current is

turned off before cleaning.

• Plastic Lens (sold separately): Only a soft damp cloth

should be used. Other cleaning products may damage

the lens.

INSTALLATION INSTRUCTIONS

1) Thread the two long screws provided into the mounting strap as shown.

2) Attach mounting strap to outlet box. (Screws provided).

3) Make wire connections (connectors provided.) Reference chart below for

correct connections and wire accordingly.

4) Push xture to wall carefully passing the two long screws through holes

in the xture canopy.

5) Tighten xture to wall with rubber washers and threaded caps.

ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES –

Couper le courant au niveau du panneau du disjoncteur

du circuit principal ou de la boîte à fusibles principale

avant de procéder à l’installation.

ATTENTION:

Ce luminaire doit être installé conformément aux codes

d’électricité nationaux (NEC) et satisfaire toutes les

spécications des codes locaux. Si vous ne connaissez

pas les exigences de ces codes, il est recommandé de

coner l’installation à un électricien certié.

INSTRUCTIONS POUR LE MONTAGE DU LUMINAIRE À

L’EXTÉRIEUR ET/OU DANS DES ENDROITS HUMIDES :

1) La surface de montage doit être propre, sèche, plate et

plus grande de 1/4 po que le cache de tous les côtés.

Tout espace entre la surface de montage et le cache

qui a plus de 3/16 po de haut devrait être corrigée au

besoin.

2) À l’aide d’un produit de calfeutrage au silicon,

calfeutrer avec soin et complètement à l’endroit où

l’arrière du cache rencontre la surface du mur pour

empêcher l’eau de pénétrer dans le boîtier.

3) L’accessoire pour lentille dirigeant la lumière vers le

haut doit être installé pour tout emplacement humide

ou à l’extérieur (vendu séparément).

• Ce luminaire peut être utilisé à l’intérieur ou à

l’extérieur, dans des endroits secs, humides ou

mouillés.

NETTOYAGE : Toujours veiller à ce que le courant

électrique soit coupé avant de nettoyer.

• Lentille en plastique (vendu séparément) : Utiliser

uniquement un chiffon doux humidié. Les autres

produits de nettoyage peuvent endommager la lentille.

INSTRUCTIONS D’INSTALLATION

1) Serrer les deux vis longues (fournies) dans la bride de montage.

2) Fixer la bride de montage sur la boîte à prises. (Vis fournies).

3) Faire les branchements (les serre-ls fournis). Se reporter au tableau

ci-dessous pour eectuer les branchements et le câblage.

4) Pousser le luminaire vers le mur en passant soigneusement

les deux longues vis de montage par les trous dans le cache.

5) Fixer le luminaire au mur à l’aide des rondelles caoutchoutés

et des capuchons letés.

OUTLET BOX

BOITE A PRISES

MOUNTING STRAP

BRIDE DE MONTAGE

LONG SCREWS

VIS LONGUES

CANOPY

CACHE

FIXTURE

LUMINAIRE

RUBBER WASHER

RONDELLE

CAOUTCHOUTE

THREADED CAP

CAPUCHON FILETE

I NSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

Nous sommes là pour vous aider 866-558-5706

Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)

IS-9244-CB

For warranty informaon please visit: kichler.com/warranty

REV 20-AUG-2020

SCREWS

VIS

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Connecter le fil noir ou

rouge de la boite

Connecter le l blanc de la boîte

A Noi

Blanc

*Au cordon parallèle (rond et lisse)

*Au cordon parallele (à angles droits el strié)

Au bransparent, doré, marron, ou

noir sans l distinctif

Au transparent, doré, marron, ou

noir avec un til distinctif

Fil isolé (sauf l vert) avec

conducteur en cuivre

Fil isolé (sauf l vert) avec

conducteur en argent

*Remarque: Avec emploi d’un fil paralléle

(SPT I et SPT II). Le l neutre est á angles

dr oits ou strié et l’autre l doit étre rond ou

lisse (Voir le schéma).

Fil Neutre

Download manual in English (PDF, 0.28 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Kichler 9246WH Cylinder Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 9246WH Cylinder Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 9246WH Cylinder Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 9246WH Cylinder Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 9246WH Cylinder Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	9246WH Cylinder
Category	Lamps
File type	PDF
File size	0.28 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 9246WH Cylinder Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (585) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (443) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (340) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (266) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (207) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (176) Read more