Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 84316MBK Walman Lamp

Manual Kichler 84316MBK Walman Lamp

Need a manual for your Kichler 84316MBK Walman Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

For warranty informaon please visit: kichler.com/warranty

Fixture Diagram

Parts List

Cauons

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main

fusebox before starng and during the installaon.

WARNING:

This xture is intended for installaon in accordance with the

Naonal Electrical Code (NEC) and all local code specicaons.

If you are not familiar with code requirements, installaon by a

cered electrician is recommended.

DIMMING:

This LED xture is compable with most standard incandescent

dimmers, LED dimmers, and electronic low voltage dimmers.

For opmal performance, an electronic low voltage dimmer

should be used.

See kichler.com/dimming for a list of compable dimmers

CLEANING:

• Always be certain that electric current is turned o before

cleaning.

• Only a so damp cloth should be used. Harsh cleaning

products may damage the nish.

[A] Outlet Box

[B] Mounting

Plate

[C] Canopy

[D] Countersunk

Mounting

Screw

[E] Plate

Mounting

Screw

[F] Cable Strain

Relief

[G] Support

Cable

[H] Power Wire

[I] Safety Cable

1) Remove mounng plate[B] from canopy[C] by

unscrewing three (3) countersunk mounng screws[D]

from side of canopy. Retain screws for re-aaching

canopy to mounng plate.

2) Aach mounng plate[B] to outlet box[A] using the

plate mounng screws[E]. Mounng plate can be

adjusted to suit posion of xture.

3) Adjust each support cable[G] to the desired length. To

shorten the cable, push up on the cable at the cable

strain relief[F] aached to the canopy and push cable

into canopy. To lengthen the cable, push up on the cable

strain relief and gently pull down on the cable to the

desired length. Adjust the length of the power wire[H]

simultaneously by gently pulling wire out of canopy or

pushing wire into canopy.

4) Aach the safety cable[I] to the mounng plate or to the

inside of the outlet box and secure into place to prevent

damage to wires during wiring.

5) Grounding instrucons: (See Illus. a or b).

a) On xtures where mounng plate is provided with a

hole and two raised dimples, wrap ground wire from

outlet box around green ground screw, and thread

into hole.

b) On xtures where a cupped washer is provided,

aach ground wire from outlet box under cupped

washer and green ground screw, and thread into

mounng plate.

If xture is provided with ground wire, connect xture

ground wire to outlet box ground wire with wire

connector aer following the above steps. Never connect

ground wire to black or white power supply wires.

6) Make wire connecons. Reference chart below for

correct connecons and wire accordingly.

Connect Black or Red

Supply Wire to:

Connect White Supply

Wire to:

Black White

*Parallel cord (round &

smooth)

*Parallel cord (square &

ridged)

Clear, Brown, Gold or

Black without Tracer

Clear, Brown, Gold or Black

with Tracer

Insulated wire (other

than green) with copper

conductor

Insulated wire (other

than green) with silver

conductor

*Note: When parallel wire (SPT

1 & SPT 2) are used. The neutral

wire is square shaped or ridged

and the other wire will be round

in shape or smooth (See illus.)

Neutral Wire

7) Raise xture to ceiling, carefully passing canopy[C] over

mounng plate[B].

NOTE: Make sure wires do not get pinched between

canopy and ceiling.

8) Align three (3) holes on side of canopy with three (3)

holes on ange of mounng plate.

9) Secure canopy to mounng plate using countersunk

mounng screws[D] previously removed from canopy.

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

Installaon Instrucons

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received, including interference that may cause

undesired operaon.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protecon against harmful interference in a residenal installaon. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instrucons, may cause harmful interference to radio communicaons. However, there is

no guarantee that interference will not occur in a parcular installaon. If this equipment does

cause harmful interference to radio or television recepon, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Informaon:

IS-84316-US

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

REV 26-MAR-2021

84316

Rating

Let us know what you think about the Kichler 84316MBK Walman Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 84316MBK Walman Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 84316MBK Walman Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 84316MBK Walman Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 84316MBK Walman Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	84316MBK Walman
Category	Lamps
File type	PDF
File size	0.38 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 84316MBK Walman Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more