Manual Kichler 45892NI Harmony Lamp

Manual

CAUTION – RISK OF SHOCK – Disconnect Power at the main

circuit breaker panel or main fuse box before starting and

during the installation.

1) Thread hexnut onto threaded pipe so that 5 threads are

exposed below hexnut. From underside of mounting strap,

thread long end of threaded pipe into hole in mounting strap

until hexnut touches mounting strap. Tighten hexnut against

mounting strap.

2) Thread second hexnut onto other end of threaded pipe.

Tighten hexnut up against mounting strap.

3) Attach mounting strap to outlet box. (Screws not provided)

4) Grounding instructions: (See Illus. A or B).

A) On fixtures where mounting strap is provided with a hole

and two raise dimples. Wrap ground wire from outlet

box around green ground screw, and thread into hole.

B) On fixtures where a cupped washer is provided. Attach

ground wire from outlet box under cupped washer and

green ground screw, and thread into mounting strap.

If fixture is provided with ground wire. Connect fixture

ground wire to outlet box ground wire with wire connector.

(Not provided.) After following the above steps. Never connect

ground wire to black or white power supply wires.

5) Make wire connections (connectors not provided.) Reference

chart below for correct connections and wire accordingly.

6) Push fixture to wall, carefully passing threaded pipe through

hole in canopy.

NOTE: Be certain wires do not get pinched between mounting

strap and canopy.

7) Thread the hexnut onto the threaded pipe. Tighten hexnut to

secure fixture to wall.

8) Carefully raise glass to the fixture. Slip the smaller opening

over the socket and fit the glass against the socket cover

9) Thread socket ring onto socket. Tighten socket ring to

secure glass in place (DO NOT over tighten).

10) Insert recommended bulbs.

Date Issued: 8/25/17 IS-45892-CB

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

A

B

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES –

Couper le courant au niveau du panneau du disjoncteur du

circuit principal ou de la boîte à fusibles principale avant de

procéder à l’installation.

2) Serrer l’écrou hexagonal sur le tube fileté de sorte que 5

filets soient exposés en dessous de l’écrou hexagonal.

Depuis le dessous de la bride de montage, passer

l’extrémité longue du tube fileté dans le trou de la sangle de

montage jusqu’à ce que l’écrou hexagonal soit en contact

avec la bride de montage. *Resserrer l’écrou hexagonal

contre la bride de montage.

3) Serrer le deuxième écrou hexagonal sur l’autre extrémité du

tube fileté. Serrer l’écrou hexagonal contre la bride de montage.

4) Visser le collier de fixaiton à la boîte de jonction (vis non

fournies).

5) Connecter les fils (connecteurs non fournis). Se reporter au

tableau ci-dessous pour faire les connexions.

6) Plaquez l’applique contre le mur, en passant soigneusement

le tube fileté dans les trou.

7) Enfoncez l’appareil sur le mur, en passant soigneusement le

tube fileté dans le trou dans le couvert.

REMARQUE: assurez-vous que les fils ne soient pas pincés

entre la sangle de montage et la voilure.

8) Enfiler l’écrou hexagonal sur le tuyau fileté. Serrez l’écrou

hexagonal pour fixer l’appareil sur le mur.

9) Soulevez soigneusement le verre à l’appareil. Glissez

l’ouverture plus petite sur la douille et placez le verre contre le

couvercle de la douille.

10) Thread socket ring onto socket. Tighten socket ring to secure

glass in place. (DO NOT over tighten.)

11) Insérez l’ampoule recommandée (Non fourni).

OUTLET BOX

BOÎTE À PRISES

WIRE

CONNECTORS

CONNECTEURS DE FIL

(2) STRAP MOUNTING SCREWS

VIS DE L'ÉTRIER DE MONTAGE

MOUNTING STRAP

ÉTRIER DE MONTAGE

FINIAL

ORNEMENT

CANOPY

COUVERCLE

(3) HEXNUTS

ÉCROU HEXAGONAL

THREADED PIPE

TUBE FILTÉ

SOCKET

DOUILLE

GLASS

VERRE

SOCKET RING

ANNEAU DE DOUILLE

BULB (NOT INCLUDED)

AMPOULE

(Pas incluse)

SOCKET COVER

COUVERCLE DE DOUILLE

Connecter le fil noir ou

rouge de la boite

Connecter le fil blanc de la boîte

A Noir A Blanc

*Au cordon parallèle (rond et lisse)

*Au cordon parallele (à angles droits el strié)

Au bransparent, doré, marron, ou

noir sans fil distinctif

Au transparent, doré, marron, ou

noir avec un til distinctif

Fil isolé (sauf fil vert) avec

conducteur en cuivre

Fil isolé (sauf fil vert) avec

conducteur en argent

*Remarque: Avec emploi d’un fil paralléle

(SPT I et SPT II). Le fil neutre est á angles

droits ou strié et l’autre fil doit étre rond ou

lisse (Voir le schéma).

Fil Neutre

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 45892NI Harmony Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 45892NI Harmony Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 45892NI Harmony Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.