Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 3898NIL18 Eileen Lamp

Manual Kichler 3898NIL18 Eileen Lamp

Need a manual for your Kichler 3898NIL18 Eileen Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

1) Fixture can be assembled with the glass pointing up or down. Determine desired

direction.

2) Lay fixture body on flat surface with sockets facing direction desired when

installed.

3) Pull supply wire up through center stem.

4) Align threaded studs at ends of center column with holes in fixture body.

5) Apply threaded locking compound the threaded studs.

6) Screw finials onto threaded studs.

7) Place body cover over center of bottom of fixture body passing threaded pipe

protruding from bottom of fixture through hole in body cover.

8) Slip trim over threaded pipe and secure in place with finial.

9) Pass wire from fixture through stem and screw stem to coupling at top of fixture.

NOTE: Thread locking compound must be applied to all stem threads as

noted with symbol () to prevent accidental rotation of fixture during cleaning,

relamping, etc.

10) Pass fixture wire through remaining stems and screw together.

11) Attach small loop to last stem.

12) Turn off power.

13) Take threaded pipe from parts bag and screw in screw collar loop a minimum of

6 mm (1/4”). Lock into place with hexnut.

14) Run another hexnut down threaded pipe almost touching first hexnut. Now screw

threaded pipe into mounting strap. Mounting strap must be positioned with extruded

thread faced into outlet box. Threaded pipe must protrude out the back of mounting

strap. Connect mounting strap to outlet box.

15) Unscrew the threaded ring from screw collar loop. Take canopy and pass over

screw collar loop. Approximately one half of the screw collar loop exterior threads

should be exposed. Adjust screw collar loop by turning assembly up or down in

mounting strap. Remove canopy.

16) After desired position is found, tighten top hexnut up against the bottom of the

mounting strap.

17) Slip canopy over screw collar loop and thread on threaded ring. Attach chain (with

fixture connected) to bottom of screw collar loop. Unscrew threaded ring, let

canopy and threaded ring slip down.

18) Weave electrical wire and ground wire through chain links no more than 3 inches

apart. Pass wire through threaded ring, canopy, screw collar loop, threaded pipe

and into outlet box.

19) Connect fixture ground wire to outlet box ground wire with wire connector. (Not

provided.) Never connect ground wire to black or white power supply wire.

20) Make wire connections (connectors not provided.) Reference chart below for correct

connections and wire accordingly.

21) Raise canopy to ceiling.

22) Secure canopy in place by tightening threaded ring onto screw collar loop.

23) Slip glass over sockets and secure in place with socket rings.

1) L’assemblage du luminaire peut être effectué avec le verre dirigé vers le haut ou

le bas. Choisir la direction.

2) Poser le luminaire sur une surface plane avec les douilles dirigées dans le sens

souhaité une fois installées.

3) Passer le fil d’alimentation par la tige centrale.

4) Aligner les goujons filetés à l’extrémité de la colonne centrale avec les trous dans

le luminaire.

5) Appliquer le frein filet sur les goujons filetés.

6) Visser les ornements sur les goujons filetés.

7) Placer le couvercle du corps inférieur sur le centre de la partie inférieure du luminaire

en passant le tube fileté sortant de la partie inférieure du luminaire par le trou dans

le couvercle du corps inférieur.

8) Passer la garniture sur le tube fileté et fixer à l’aide de l’ornement.

9) Acheminer le fil du luminaire par la tige et visser la tige dans l'accouplement en

haut du luminaire.

REMARQUE: appliquer le frein filet sur tous les filets de la

tige indiqués par le symbole () pour empêcher la rotation accidentelle du

luminaire pendant le nettoyage, remplacement de lampe, etc.

10) Acheminer le fil du luminaire par les tiges restantes et visser ensemble.

11) Attacher la petite boucle à la dernière tige.

12) Couper le courant électrique.

13) Visser le tube fileté (qui se trouve avec les pièces détachées) dans le collier-écrou,

sur une longueur minimum de 6 mm (1/4 po). Fixer avec un écrou hexagonal.

14) Visser un second écrou hexagonal de manière à ce qu’il touche presque le premier.

Visser ensuite le tube fileté sur la patte de fixation, en le faisant dépasser et en

dirigeant la partie filetée des vis vers la boîte de jonction. Connecter la patte

de fixation à la boîte de jonction.

15) Dévisser la bague filetée du collier-écrou. Passer le cache sur le collier-écrou.

Environ la moitié de filetage extérieur de celui-ci doit être apparent. Fixer le collier-

écrou en faisant pivoter l’assemblage vers le haut ou vers le bas. Enlever le cache.

16) La bonne position étant trouvée, serrer l’écrou hexagonal supérieur contre le partie

inférieur de la patte de fixation.

17) Glisser le cache sur le collier-écrou et enfiler sur la bague filetée. Attacher la

chaine (avec l’assemblage connecté) au bas du collier-écrou. Dévisser la bague

filetée et laisser glisser le cache et la bague filetée.

18) Entrelacer le fil électrque et le fil de mise á la terre et faire passer le tout dans les

anneaux de la chaîne en espaçant au maximum de 3 po. Passer le fil dans la

bague filetée, le cache, le collier-écrou, le tube fileté et la boîte de jonction.

19) Avec l’attache-fil (qui n’est pas fourni), connecter le fil de mise á la terre au

fil d’alimentation noir ou á celui qui est blanc.

Date Issued: 7/21/06 IS-3898-CB





Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth)

*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire





INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

FIXTURE BODY

LUMINAIRE

CENTER COLUMN

COLONNE CENTRALE

FINIAL

ORNEMENT

CENTER STEM

TIGE CENTRALE

TRIM

GARNITURE

THREADED STUD

GOUJON FILETÉ

MOUNTING STRAP

PATTE DE FIXATION

HEXNUT

ECROU

HEXAGONAL

CANOPY

CACHE

THREADED PIPE

TUBE FILETE

THREADED RING

BAGUE-FILETEE

SCREW COLLAR LOOP

COLLIER-ECROUS

SMALL LOOP

PETIT BOUCLE

SOCKET RING

ANNEAU DE

DOUILLE

GLASS

VERRE

STEM

TIGE

BODY COVER

COUVERCLE DU CORPS

20) Connecter les fils (connecteurs non fournis). Se reporter au tableau ci-dessous

pour faire les connexions.

21) Placer le cache au plafond.

22) Fixer le cache en serrant la bague fileté sur le collier-écrou.

23) Faire glisser le verre sur les douille et fixer à l’aide des bague de douille.

Connecter le fil noir ou

rouge de la boite

Connecter le fil blanc de la boîte

A Noir A Blanc

*Au cordon parallèle (rond et lisse)

*Au cordon parallele (à angles droits el strié)

Au bransparent, doré, marron, ou

noir sans fil distinctif

Au transparent, doré, marron, ou

noir avec un til distinctif

Fil isolé (sauf fil vert) avec

conducteur en cuivre

Fil isolé (sauf fil vert) avec

conducteur en argent

*Remarque: Avec emploi d’un fil paralléle

(SPT I et SPT II). Le fil neutre est á angles

droits ou strié et l’autre fil doit étre rond ou

lisse (Voir le schéma).

Fil Neutre

Rating

Let us know what you think about the Kichler 3898NIL18 Eileen Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 3898NIL18 Eileen Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 3898NIL18 Eileen Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 3898NIL18 Eileen Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 3898NIL18 Eileen Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	3898NIL18 Eileen
Category	Lamps
File type	PDF
File size	0.08 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 3898NIL18 Eileen Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more