Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 3681NIL18 Langford Lamp

Manual Kichler 3681NIL18 Langford Lamp

Need a manual for your Kichler 3681NIL18 Langford Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SEMI-FLUSH MOUNT

1) Remove loop from top of canopy.

2) Remove threaded balls from canopy. DO NOT discard

threaded balls.

2) Insert threaded studs at top of arms into holes in top

of fixture canopy.

3) Screw threaded washers onto threaded studs from

inside fixture canopy to secure arms to fixture.

4) Turn off power.

5) Find the appropriate threaded holes on mounting strap.

Assemble mounting screws into threaded holes.

6) Attach mounting strap to outlet box. (Screws not

provided) Mounting strap can be adjusted to suit position

of fixture.

7) Make wire connections (connectors not provided.)

Reference chart below for correct

connections and wire accordingly.

8) Push fixture to ceiling, carefully passing mounting

screws through holes.

9) Secure fixture to ceiling with threaded balls.

10) Screw end of threaded pipe with hexnut installed into

coupling at bottom of fixture

11) Slip tube then check ring over threaded pipe.

12) Pass flat washer then rubber washer over threaded

pipe.

13) Raise glass up to fixture carefully passing threaded pipe

through holes in glass. Secure glass in place with rubber

washer, flat washer and hexnut. (DO NOT over tighten.)

14) Pass trim over threaded pipe..

15) Slip threaded studs at ends of trim through holes at

ends of arms.

16) Screw finial onto threaded pipe protruding from center of

trim. (DO NOT over tighten.)

17) Screw finials onto threaded studs to secure trim to

arms.

CHAIN DROP

1) Insert threaded studs at top of arms into holes in top

of fixture canopy.

2) Screw threaded washers onto threaded studs from

inside fixture canopy to secure arms to fixture.

3) Turn off power.

4) Take threaded pipe from parts bag and screw in screw

collar loop a minimum of 6mm (1/4”). Lock into place

with hexnut.

5) Run another hexnut down threaded pipe almost touching

first hexnut. Now screw threaded pipe into mounting

strap. Mounting strap must be positioned with extruded

thread faced into outlet box. Threaded pipe must protrude

out the back of mounting strap. Connect mounting strap

to outlet box.

6) Unscrew the threaded ring from screw collar loop. Take

canopy and pass over screw collar loop. Approximately

one half of the screw collar loop exterior threads should be

exposed. Adjust screw collar loop by turning assembly up

or down in mounting strap. Remove canopy.

7) After desired position is found, tighten top hexnut up

against the bottom of the mounting strap.

9) Slip canopy over screw collar loop and thread on

threaded ring. Attach chain (with fixture connected) to

bottom of screw collar loop. Unscrew threaded ring, let

canopy and threaded ring slip down.

10) Weave electrical wire and ground wire through chain

links no more than 3 inches apart. Pass wire through

threaded ring, canopy, screw collar loop, threaded pipe

and into outlet box.

11) Connect fixture ground wire to outlet box ground wire

with wire connector. (Not provided.) Never connect

ground wire to black or white power supply wire.

10) Make wire connections (connectors not provided.)

Reference chart below for correct connections and wire

accordingly.

11) Raise canopy to ceiling.

12) Secure canopy in place by tightening threaded ring

onto screw collar loop.

13) Screw end of threaded pipe with hexnut installed into

coupling at bottom of fixture

14) Slip tube then check ring over threaded pipe.

15) Pass flat washer then rubber washer over threaded

pipe.

16) Raise glass up to fixture carefully passing threaded pipe

through holes in glass. Secure glass in place with rubber

washer, flat washer and hexnut. (DO NOT over tighten.)

17) Pass trim over threaded pipe..

18) Slip threaded studs at ends of trim through holes at

ends of arms.

19) Screw finial onto threaded pipe protruding from center of

trim. (DO NOT over tighten.)

20) Screw finials onto threaded studs to secure trim to

arms.

IS-3681-CB

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth)

*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Date Issued: 9/8/06

MOUNTING STRAP

HEXNUT

THREADED PIPE

SCREW

COLLAR LOOP

THREADED RING

CANOPY

LOOP

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth)

*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

MOUNTING STRAP

CANOPY

FIXTURE BODY

COUPLING

TUBE

CHECK RING

THREADED STUD

THREADED WASHER

FINIAL

ARM

THREADED BALL

THREADED PIPE

GLASS

VIDRIO

RUBBER WASHER

HEXNUT

THREADED STUD

RUBBER WASHER

TRIM

FINIAL

FLAT WASHER

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

Rating

Let us know what you think about the Kichler 3681NIL18 Langford Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 3681NIL18 Langford Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 3681NIL18 Langford Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 3681NIL18 Langford Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 3681NIL18 Langford Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	3681NIL18 Langford
Category	Lamps
File type	PDF
File size	0.08 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 3681NIL18 Langford Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more