Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 3674NI Hendrik Lamp

Manual Kichler 3674NI Hendrik Lamp

Need a manual for your Kichler 3674NI Hendrik Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

1) Turn off power.

2) Find the appropriate threaded holes on mounting strap. Assemble mounting

screws into threaded holes.

3) Attach mounting strap to outlet box. (Screws not provided)

Mounting strap can be adjusted to suit position of fixture.

4) Make wire connections (connectors not provided.) Reference chart below

for correct connections and wire accordingly.

5) Push fixture to ceiling, carefully passing mounting screws through holes.

6) Secure fixture to ceiling with threaded balls.

7) Screw threaded pipe into coupling at bottom of fixture

8) Pass flat washer then rubber washer over threaded pipe.

9) Raise glass up to fixture carefully passing threaded pipe through hole in

glass. Secure glass in place with rubber washer, flat washer and hexnut.(DO

NOT over tighten.)

10) Pass trim over threaded pipe and screw finial onto end of threaded pipe.

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth)

*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Date Issued: 7/14/06

IS-3674-CB

COUPLING

ACCOUPLEMENT

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

1) Couper l’alimentation secteur.

2) Trouver les trous filetés appropriés sur la barrette de montage. Vissez les

vis de montage dans les trous filetés.

3) Visser la barrette de montage à la boite de jonction. (Vis non fournies).

La barrette de montage peut etre ajustée pour convenir à la position de

l’applique.

4) Connecter les fils (connecteurs non fournis). Se reporter au tableau ci-

dessous pour faire les connexions. Plaquer l’applique contre le

mur, en passant soigneusement les vis de montage dans les trous.

5) Appliquer l’armature d’éclairage au plafond en introduisant prudemment

les vis de fixation dans les trous.

6) Visser le lustre au plafond á l’aide des rondelles-frein et des boules

filetées.

7) Visser le tube fileté dans l’accouplement sur l’extrémité inférieure du

luminaire.

8) Passer la rondelle plate puis la rondelle caoutchoutée sur le tube fileté.

9) Soulever le verre vers le luminaire en passant soigneusement le tube

fileté par les trous dans le verre. Fixer le verre à l’aide de la rondelle en

caoutchouc, de la rondelle plate et de l’écrou hexagonal.

(NE PAS serrer avec excès).

10) Passer la garniture sur le tube fileté et visser l’ornement sur l’extrémité

du tube fileté.

RUBBER WASHER

RONDELLE CAOUTCHOUTÉE

FLAT WASHER

RONDELLE PLATE

TRIM

GARNITURE

FINIAL

ORNEMENT

HEXNUT

ECROU HEXAGONAL

GLASS

VERRE

MOUNTING STRAP

PATTE DE FIXATION

THREADED PIPE

TUBE FILETE

FIXTURE BODY

LUMINAIRE

THREADED BALL

BOULE FILETÉ

RUBBER WASHER

RONDELLE CAOUTCHOUTÉE

FLAT WASHER

RONDELLE PLATE

Connecter le fil noir ou

rouge de la boite

Connecter le fil blanc de la boîte

A Noir A Blanc

*Au cordon parallèle (rond et lisse)

*Au cordon parallele (à angles droits el strié)

Au bransparent, doré, marron, ou

noir sans fil distinctif

Au transparent, doré, marron, ou

noir avec un til distinctif

Fil isolé (sauf fil vert) avec

conducteur en cuivre

Fil isolé (sauf fil vert) avec

conducteur en argent

*Remarque: Avec emploi d’un fil paralléle

(SPT I et SPT II). Le fil neutre est á angles

droits ou strié et l’autre fil doit étre rond ou

lisse (Voir le schéma).

Fil Neutre

Rating

Let us know what you think about the Kichler 3674NI Hendrik Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 3674NI Hendrik Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 3674NI Hendrik Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 3674NI Hendrik Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 3674NI Hendrik Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	3674NI Hendrik
Category	Lamps
File type	PDF
File size	0.07 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 3674NI Hendrik Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more