Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 1672NI Hendrik Lamp

Manual Kichler 1672NI Hendrik Lamp

Need a manual for your Kichler 1672NI Hendrik Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

1) Turn off power.
2) Install canopy mounting screws, finger tight.
3) Loctite® threaded pipe from parts bag approximately 1/2” into stem.
4) Slip canopy then mounting strap over stem(s) assembled to fixture.
5) Loctite® ball swivel to threaded pipe. (Thread ball onto pipe until snug
against stem) Secure ball swivel in place by threading a hexnut onto
threaded pipe inside ball.
6) Lift mounting strap up against ball swivel, aligning slot in ball with tab in
strap. Snap ball retainer into place. Placing one side of ball retainer in place
and then snapping the other in is suggested.
7) Attach assembled fixture/mounting strap to outlet box. Assemble mounting
strap to ceiling with ball slot and tab towards lower portion of slope in
ceiling. (REF: Illustration A)
8) Attach ground wire from outlet box between cupped washer and green
ground screw and thread ground screw into mounting strap. If fixture is
provided with ground wire, connect fixture ground wire to outlet box
ground wire with wire connectors (not provided). Never connect ground
wire to black or white power supply wire.
9) Make wire connections (connectors not provided.) Reference chart below for
correct connections and wire accordingly.
10) Carefully slip canopy up stem and secure to ceiling using lockwashers
(Canadian installations only) and ball knobs.
NOTE: Loctite® must be applied to all stem threads as noted to prevent
accidental rotation of fixture during cleaning,relamping, etc. ...
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
CUPPED
WASHER
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
FIXTURE
GROUND
GREEN GROUND
SCREW
1) Apague la alimentación eléctrica.
2) Instalar los tornillos de montaje del escudete, apretando con los dedos.
3) Aplicar Loctite® al tubo roscado de la bolsa de piezas, aproximadamente 1/2” en
el vástago.
4) Deslizar el escudete y luego la abrazadera de montaje sobre el (los) vástago(s)
montados al artefacto.
5) Aplicar Loctite® al pivote a rótula y al tubo roscado. (Roscar el pivote en el tubo
hasta que esté apretado contra el vástago.)
Asegurar en el lugar el pivote a rótula roscando a la tuerca hexagonal en el tubo
roscado, adentro de la rótula.
6) Levantar la abrazadera de montaje contra el pivote a rótula, alineando la muesca
en la rótula con la orejeta en la abrazadera. Instalar rápido el retenedor redondo
en su lugar. Se sugiere colocar un lado del retenedor redondo en el lugar y luego
enganchar el otro.
7) Acoplar la abrazadera de montaje/artefacto ensamblados a la caja de salida.
Montar la abrazadera de montaje al cielorraso con la muesca y orejeta hacia la
porción más baja de la inclinación del cielorraso. (Ref: Ilustración A)
8) Acoplar el alambre de tierra de la caja de salida entre la arandela cóncava y el
tornillo de tierra verde, y roscar el tornillo de tierra en la abrazadera de montaje.
Si el artefacto está provisto con un alambre de tierra, conectar el alambre de
tierra del artefacto al alambre de tierra de la caja de salida, con los conectores de
alambre (no se proveen). Nunca se debe conectar el alambre de tierra al alambre
de alimentación negro o blanco.
9) Hacer las conexiones de los alambres (conectores no incluidos.) Ver el cuadro
más abajo para las conexiones correctas y alambrar de acuerdo a esto.
10) Cuidadosamente deslizar el escudete arriba en el vástago y asegurar al cielorraso
usando las arandelas de seguridad (Sólo en instalaciones canadienses) y las
perillas redondas.
NOTE: Se debe aplicar Loctite® a todas las roscas de los vástagos como se notó,
para impedir la rotación accidental del artefacto durante la limpieza, el
cambio de bombilla, etc.
Connecter le fil noir ou
rouge de la boite
Connecter le fil blanc de la boîte
A Noir A Blanc
*Au cordon parallèle (rond et lisse)
*Au cordon parallele (à angles droits el strié)
Au bransparent, doré, marron, ou
noir sans fil distinctif
Au transparent, doré, marron, ou
noir avec un til distinctif
Fil isolé (sauf fil vert) avec
conducteur en cuivre
Fil isolé (sauf fil vert) avec
conducteur en argent
*Remarque: Avec emploi d’un fil paralléle
(SPT I et SPT II). Le fil neutre est á angles
droits ou strié et l’autre fil doit étre rond ou
lisse (Voir le schéma).
Fil Neutre
OUTLET BOX
CAJA DE SALIDA
BALL
RETAINER
RETENEDOR
REDONDO
BALL SWIVEL
PIVOTE A
ROTULA
CUPPED WASHER
ARANDELA
CONCAVA
CANOPY
MOUNTING
SCREW
TORNILLO DE
MONTAJE DEL
ESCUDETE
SCREW NOT
PROVIDED
TORNILLO NO
SE PROVEEN
CANOPY
ESCUDETE
SLOPED CEILING
CIELORRASO
INCLINADO
STEM
VASTAGO
BALL KNOB
PERILLA
REDONDA
SLOT AND TAB
MUESCA Y
OREJETA
HEXNUT
TUERCA
HEXAGONAL
SLOT
MUESCA
MOUNTING
STRAP
ABRAZADERA
DE MONTAJE
GREEN
GROUND
SCREW
TORNILLO
VERDE DE
TIERRA
THREADED PIPE
TUBO ROSCADO
CONECTOR DE ALAMBRE
(NO SE PROVEE)
TIERRA DE LA
CAJA DE SALIDA
TIERRA
ARTEFACTO
TORNILLO DE TIERRA,
VERDE
ARANDELA
CONCAVA
IS-3001-US
Date Issued 10/9/98
ILLUSTRATION A
ILUSTRACION A
Download manual in English (PDF, 2 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Kichler 1672NI Hendrik Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Kichler 1672NI Hendrik Lamp?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 1672NI Hendrik Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 1672NI Hendrik Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 1672NI Hendrik Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Kichler
Model 1672NI Hendrik
Category Lamps
File type PDF
File size 2 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 1672NI Hendrik Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more

What is LED? Verified

LED stands for Light-Emitting Diode. By running power through a semiconductor in the right direction, light is emitted.

This was helpful (98) Read more
Manual Kichler 1672NI Hendrik Lamp