Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 15350CO Adjustable Lamp

Manual Kichler 15350CO Adjustable Lamp

Need a manual for your Kichler 15350CO Adjustable Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SAFETY INSTRUCTIONS

READ THIS FIRST

KEEP THESE INSTRUCTIONS

This ﬁxture is intended for installation in accordance with the

National Electric Code (NEC) and Local code speciﬁcations.

Failure to adhere to these codes and instructions may result in

serious injury and/or property damage and will void the warranty.

1) WARNING: This ﬁxture is not to be installed within 10 feet (3M)

of a pool, spa or fountain.

2) This ﬁxture is to be used only with a power unit (transformer)

rated a maximum of 300 W (25 AMPS) 15 volts.

3) The #18 ga. ﬁxture wire is not intended for direct burial.

4) Direct burial rated wire is to be buried a minimum of 6"

(152mm) beneath the surface of the ground.

NOTE: If additional Direct Burial wire is needed, contact your

local Kichler

landscape distributor.

 •8GAwirecanbepurchasedinlengthof250’(76M),15503-BK.

 •10GAwirecanbepurchasedinlengthof250’(76M), 

  15504-BK.

 •12GAwirecanbepurchasedinlengthsof100’(30M),

  15501-BK;250’(76M),15502-BK;500’(152M),15505-BK;and

  1000’(304M),15506-BK.

5) Fixture shall not use a tungsten halogen lamp unless the ﬁxture

is marked for use with such lamps.

6) Wiring connections must be made with approved/listed wire

connection device(s) suitable for the application. Do not exceed

 manufacturers’wiringcombinationspecicationsforsizeand

quantity of conductors.

ASSEMBLY AND INSTALLTION

1) Determine desired location for mounting ﬁxture.

2) At desired location, hammer stake (A) into ground. To avoid

damage to stake, place a board on top of stake while hammering.

If ground is hard and stake is difﬁcult to install, make a crosscut

in ground using a ﬂat shovel.

3) Clear away area in ground at wireway slot (B) in top of stake (A).

4) Lay 12V cable into wireway slot (B) and screw stem (C) into

stake (A). If assembly does not look straight, adjust by pushing

or pulling on stake only.

5) Install provided lamp (E) to socket inside ﬁxture body (D).

6) Slip hood (F) over lamp (E) and ﬁxture head (D).

7) Alignthreadedholeinhood(F)withoneoftheholesinxture

 head(D).Threadthumbscrew(G)intohole.Lightspreadcanbe

adjusted by using the different holes in ﬁxture head.

8) TURN OFF POWER.

9) Make wire connections using supplied Kichler

Pro Series Wire

Connectors following instructions included, or using other

approved wiring connection method (not supplied.)

INSTRUCCIONES DE SEGURIDAD

PRIMERO LEA ESTO

GUARDE ESTAS INSTRUCCIONES

Este artefacto se debe instalar de acuerdo con el Código

Eléctrico Nacional (NEC, por sus siglas en inglés) y con las

especiﬁcaciones del código local. No cumplir con estos códigos

e instrucciones puede resultar en lesiones graves y/ o en daños

a la propiedad y anulará la garantía.

1) Advertenciaertencia: Este artefacto no debe instalarse a menos

de 10 pies (3 m) de una piscina (alberca), spa o fuente.

2) Esteartefactodebeutilizarsesolamenteconunaunidadde

potencia (tranformador) con capacidad nominal máxima de 300

vatios (25 amp.) 15 voltios.

3) El alambre del artefacto calibre No. 18 no es para soterrado

directo.

4) El alambre clasiﬁcado para soterrado directo se debe enterrar

un mínimo de 6 pulgadas (152 mm) debajo de la superﬁcie del

terreno. NOTA: Si necesita alambre de soterrado directo

adicional, co muníquese con su distribuidor local Kichler® de

productos de jardinería ornamental.

 •Elalambrecalibre8puedecomprarseenlongitudde250’(76m.),

  15503-BK

 •Elalambrecalibre10puedecomprarseenlongitudde250’

  (76m.),15504-BK

 •Elalambrecalibre12puedecomprarseenlongitudesde75’

  (22m.),15550-BK;100’(30m.),15501-BK;250’(76m.),

  15502-BK;500’(152m.),15505-BK;y1000’(304m.),15506-BK.

5) Elartefactonodebeutilizarseconlámparasdehalógeno,a

menoss que el artefacto esté marcado para usar con tales

lámparas.

6) Las conexiones de cableado se deben hacer con las conexiones

 del(los)dispositivos)deconexióndecableadoaprobados/de

 lalista,adecuadosparalaaplicación.Noexcedalas 

 especicacionesdecombinacióndecableadodelfabricante

para el tamaño y cantidad de conductores.

For warranty information please visit: http://www.landscapelighting.com/portal/warranty_page

Para informacion de la garantia por favor visite: www.landscapelighting.com/portal/warranty_page

DateIssued:7/13/12 IS-15350-US

MONTAJE E INSTALACIÓN

1) Determine el lugar deseado para montar el artefacto.

2) En el lugar deseado, martille la estaca (A) en el suelo. Para

evitar dañar la estaca, coloque una tabla en la parte superior

de la estaca mientras esté martillando. Si el suelo es duro y es

 difícilinstalarlaestaca,hagauncortecruzadoenelsuelo

usando una pala plana.

3) Limpie el área del suelo en la ranura del canal (B) de alambres

la parte superior de la estaca (A).

4) Coloque el cable de 12 V en la ranura del canal (B) de alambres

y atornille el vástago (C) en la estaca (A). Si el conjunto no se

ve derecho, ajuste empujando o estirando de la estaca solamente.

5) Instale la bombilla (E) que se provee, en el casquillo dentro de

la cuerpo (D) del artefacto.

6) Resbalelacabeza(F)sobrelalámpara(E)ylacabezadel

artefacto (D).

7) Alineeelagujeroroscadoenlacubierta(F)conunodelos

 agujerosenlacabezadelartefacto(D).Enrosqueeltornillo(G)

 enelagujero.Lapropagacióndelaluzpuedeajustarse 

 utilizandoagujerosdiferentesenlacabezadelartefacto.

8) APAGUELAALIMENTACIÓNELÉCTRICA.

9) Haga las conexiones de cableado usando del conector de hilo (o

alambre) Kichler

Pro Series suministrado y siguiendo las

 instruccionesdeincluidas,ousandootrométododeconexión

de cableado aprobado (no se suministra.) de cableado aprobado

(no se suministra.)

Rating

Let us know what you think about the Kichler 15350CO Adjustable Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 15350CO Adjustable Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 15350CO Adjustable Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 15350CO Adjustable Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 15350CO Adjustable Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	15350CO Adjustable
Category	Lamps
File type	PDF
File size	0.11 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 15350CO Adjustable Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more