Home > Household appliances > Refrigerators > Kelvinator Refrigerators > Kelvinator KI130SD Refrigerator

Manual Kelvinator KI130SD Refrigerator

Need a manual for your Kelvinator KI130SD Refrigerator? Below you can view and download the PDF manual for free in English. This product currently has 14 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

General

This type of refrigerator is widely used in places such as hotels, offices, student dormitories and

houses. It is mostly suitable for refrigerating and preserving foods such as fruits and beverages. It

enjoys the advantages of being small in size, lightweight and low electricity consumption and easy to

use.

Instructions for Installation

1. Do not tilt the refrigerator for more than 45 degrees of its upright position during moving. Do not

apply force on parts such as condenser and door to prevent the refrigerator from deforming, or else it

will influence its performance.

2. Let the refrigerator have enough space to work well.

3. Do not install it in high temperatures of humidity, place so as to avoid being damaged, dampened

and rusted.

Cautions for Safety

1. Before the refrigerator is plugged in, check that the electricity voltage to be used fits the same as

the rated voltage. The power plug should have an independent socket. The adapter may cause the

socket to overheat.

2. Do not store flammable materials such as ether, benzene, LP gas and glue etc in the refrigerator.

3. Do not splash water on the refrigerator, it may cause a malfunction or electric shock.

4. When gas leaks from its container, do not pull the plug out or plug it in, it may cause sparks and

fire.

Instructions for Use

1. When operating the refrigerator for the first time, run it without loading any food until it is at the

desired temperature. Usually it takes 2 or 3 hours, then set the thermostatic dial at the setting desired

and put foods in the refrigerator.

2. The temperature of the refrigerator can be adjusted by turning the thermostat dial. A medium

setting of the thermostat dial is the most suitable for general operation. Set the thermostatat“6”only

when ice cubes are made or frozen food is stored in the freezing compartment.

3. Defrost the freezing compartment whenever the layer of frost on the surface of the evaporator

reaches 3 or 4 mm. When defrosting remove all food and ice cube trays and set the thermostat at the

“OFF”position.Putthedriptrayundertheevaporatortocollectmeltedwater.Afterthefrosthas

melted, discard the melted water and dry up the interior of the refrigerator. The refrigerator can then

be restarted by turning the thermostat to the desired setting.

4. Instruction for making and removing ice cubes.

Fill water into the ice making case below the graduated line, put it into the freezing compartment, and

thensetthethermostatat“6”.Ittakesabout2 or 3 hours to make ice cubes. Ice cubes can be

removed by twisting the ice making case. Do not cut up and down, otherwise it may be broken.

Cautions for Use

1. The more food stuff put in or the more and longer the door is opened, the more it needs electric

consumption, which may lead malfunction.

2. It is best not to place objects which are too heavy, pointed or corrosive on the table board.

3. Re-plugging in the power plug at the interval of over ten minutes.

4. Do not store bottled drink in the freezer, so as to prevent from being broken and damaging the

refrigerator.

Rating

Let us know what you think about the Kelvinator KI130SD Refrigerator by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kelvinator KI130SD Refrigerator?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kelvinator KI130SD Refrigerator. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kelvinator KI130SD Refrigerator. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kelvinator. They might be able to provide an original manual. Are you looking for the manual of your Kelvinator KI130SD Refrigerator in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kelvinator
Model	KI130SD
Category	Refrigerators
File type	PDF
File size	0.15 MB

All manuals for Kelvinator Refrigerators
More manuals of Refrigerators

Frequently Asked Questions about Kelvinator KI130SD Refrigerator

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

If I want my refrigerator to be colder, should I choose for a higher or lower setting? Verified

With most refrigerators a higher setting means the machine will cool harder. With a lower setting, the machine will cool less hard and the temperature in the refrigerator will be higher.

This was helpful (3275) Read more

What is the best temperature setting for a refrigerator? Verified

From a health perspective temperatures between 3℃ and 4℃ are the best. At these temperatures the growth of bacteria and mold is limited.

This was helpful (1492) Read more

Can I change the opening direction of the door of my refrigerator? Verified

Yes, nearly all standing refrigerators offer the option to place the door on the other side. How to do this can generally be found in the manual.

This was helpful (1202) Read more

The drain hole in my refrigerator is dirty/clogged, how do I clean it? Verified

There are special cleaning devices to do this, but it is also possible to remove blockage or dirt with a cotton swab. To keep the drain hole clean and prevent smells it is advisable to put a drop of chlorine bleach in the drain 4 times a year.

This was helpful (1064) Read more

My refrigerator makes a bubbling sound, is that normal? Verified

Modern refrigerators make use of an environmentally friendly cooling agent. During the cooling process this substance turns into a gas, which can cause a bubbling and/or hissing sound. This is perfectly normal.

This was helpful (819) Read more

Is it normal that water or ice drops are forming on the back wall of my refrigerator? Verified

Yes, this a completely normal phenomenom. The moisture that enters the refrigerator with warm air or products will settle on the coldest part, being the back wall. Because the back wall can reach temperatures below freezing, the drops will freeze from time to time. When the refrigerator is idle the drops will thaw and flow to the drain of the refrigerator.

This was helpful (614) Read more

De door of my refrigerator will not close properly, why is that? Verified

The two most common causes are that the refrigerator is not level and that the door seal is damaged or has food remains on it. Make sure the refrigerator is level and check the door seal. Replace the seal if neccesary.

This was helpful (472) Read more

I bought a new refrigerator, can I turn it on immediately? Verified

No, the refrigerator needs to stand in an upright position for at least 4 hours before it can be turned on. This is because the coolant liquid needs to settle.

This was helpful (416) Read more

How much space should I leave betwee my refrigerator and the wall? Verified

To ensure a good ventilation it's best to leave at least 5cm of free space on both sides and the back of the refrigerator.

This was helpful (349) Read more

How long does it take for my refrigerator to reach the set temperature after I turn it on? Verified

This depends on the size, age and model of the refrigerator. It may take several hours to 24 hours for the refrigerator to reach the set temperature. The process can be accelerated by placing non-perishable goods in the refrigerator. The temperature in the refrigerator cannot be measured properly by feeling the air inside. The best way to tell if the refrigerator has reached the set temperature is to place a glass of water in the refrigerator with a thermometer in it.

This was helpful (251) Read more

Can I put warm food or drinks in my refrigerator? Verified

Preferably not. The temperature in your refrigerator will rise, which negatively impacts the other items that are stored inside.

This was helpful (199) Read more

There is condensation in my refrigerator, why is that? Verified

There can be several causes. The door gasket can be defective, allowing outside air into the refrigerator. It's also possible that the refrigerator is not level, preventing the door from closing correctly. Another cause is a large difference between the temperature inside the refrigerator and outside while the door is being opened frequently.

This was helpful (195) Read more

There is mold on the rubber seals of my refrigerator, what should I do? Verified

The rubber seals are not actually inside the refrigerator and are therefore warmer. This allows bacteria to grow and mold to form. Clean the rubbers regularly to prevent this.

This was helpful (163) Read more

What is R-410A? Verified

R-410A is a cooling agent that is used in appliances that cool up to 0°C, like refrigerators and air conditioners. It is the replacement of older cooling agents and does not damage the ozon layer.

This was helpful (160) Read more