Manual Hunter 19076 Laurel Lamp

Manual

INSTALLATION INSTRUCTIONS

INSTRUCCIONES DE INSTALACIÓN / INSTRUCTIONS D’INSTALLATION

READ AND SAVE THESE INSTRUCTIONS

These instructions are provided for your safety.

It is very important that they are read carefully

and completely before beginning installation

of the lighting xture.

•

WARNING

• To avoid possible electrical shock, before

installing your light xture, disconnect the power

by turning off the circuit breakers to the outlet box

associated with the wall switch location.

• The lighting xture must be grounded. If the

ground wire for the installation site is not present,

immediately STOP installation and consult a

qualied electrician.

• All wiring must be in accordance with national

and local electrical codes ANSI/NFPA 70. If you

are unfamiliar with wiring or in doubt, consult a

qualied electrician.

LEA Y GUARDE ESTAS INSTRUCCIONES

Estas instrucciones se proporcionan para

su seguridad. Es muy importante leerlas

detenidamente y completamente antes de

comenzar la instalación de la lámpara.

•

•

Para evitar una posible descarga eléctrica, antes

de instalar su lámpara, desconecte la energía

apagando los interruptores automáticos (breakers)

que alimentan la caja de salida asociada con la

ubicación del interruptor de pared.

• L’appareil d’éclairage doit être mis à la terre.

Si le l de terre du lieu d’installation n’est pas

présent, ARRÊTEZ immédiatement l’installation

et consultez un électricien qualié.

• Todo el cableado debe realizarse de acuerdo

con los códigos eléctricos locales y nacionales

ANSI/NFPA 70. Si no está familiarizado con

el cableado, o si tiene duda, consulte a un

electricista calicado.

ADVERTENCIA

LISEZ ET CONSERVEZ CES INSTRUCTIONS

Ces instructions sont fournies pour votre

sécurité. Il est très important de les lire

attentivement dans leur intégralité avant

d’entreprendre l’installation du luminaire.

•

AVERTISSEMENT

• Pour éviter tout choc électrique, avant

d’installer le luminaire, coupez le courant en

éteignant les disjoncteurs de la boîte électrique

associée à l’interrupteur mural.

• Le luminaire doit être mis à la terre. Si le l

de terre du lieu d’installation n’est pas présent,

ARRÊTER immédiatement l’installation et

consulter un électricien qualié.

• Tout le câblage doit être conforme aux codes

électriques nationaux et locaux en vigueur et

à la norme ANSI/NFPA70. Si vous n’avez pas

l’habitude de faire ce câblage ou en cas de doute,

adressez-vous à un électricien qualié.

ENGLISH

Laurel Ridge

KC04401872

KC04401A57

Burnished Brass

Níquel Pulido

Nickel Brossé

Natural Iron

Hierro Natural

Fer Naturel

KC4401214

19074

19075

19076

Brushed Nickel

Níquel Pulido

Nickel Brossé

Part #/Pieza #/Pièce #

Hardware Service Kit / Kit De Mantenimiento Del Equipo /

Trousse De Maintenance Quincaillerie

Finish/Finish/FiniModel/Modelo/Modèle

Hardware Service Kit / Kit De Mantenimiento Del Equipo /

Trousse De Maintenance Quincaillerie

For Models:

Para los Modelos:

Pour les Modèles:

Here are the

tools you’ll

need to

complete your

installation:

Estas son las

herramientas

que usted

necesitará para

completar su

instalación:

Voici les outils

dont vous

aurez besoin

pour réaliser

l’installation:

Ladder

Escalera

Échelle

Pliers

Alicates

Pince

Wire Strippers

Pelacables

Pince à dénuder

Screwdriver

Destornilladore

Tournevis

4 Light Lantern Flush Mount

4 Luz Farol Empotrado

4 Lumière Lanterne Montage Afeurant

Fixture weight ±2 lbs:

Peso ±2 lbs:

Poids xe ±2 lbs:

1.84 lbs (0.83 kg)

PREPARING FOR INSTALLATION

Carefully remove all contents from the carton. Shut off the power at the circuit breaker and completely remove the old

xture from the ceiling, including the old mounting bracket. Remove the new mounting bracket assembly from the bag.

Remove decorative nuts (G) from mounting screws (A). Mounting plate (B) contains several pairs of threaded holes. Find

the pair of holes that matches the spacing on the holes on the xture’s canopy. Place the mounting plate (B) over the

junction box so that mounting screws (A) and nuts (C) are visible. Pull the house wires through the center of mounting

plate (B). Secure mounting plate (B) to the junction box by tightening the screws (D). Adjust the position of mounting

screws (A) so that mounting screws (A) can be exposed 5–6 mm after passing through the canopy (F). Once the ideal

position of mounting screws (A) has been conrmed, tighten nuts (C) on mounting screws (A) under the mounting plate

to ensure that mounting screws (A) are in place.

CONNECTING THE WIRES

Have a helper support the xture’s weight while completing the wiring.

Attach the xture’s wires to the power supply wires from the junction

box. Connect black to black (Live); white to white (grounded); grounding

to grounding (green or copper). Twist the ends of the wire pairs together.

Then, twist on a wire connector. Make sure all twists are in the same

direction. Loop xture’s ground wire around grounding screw (E) and

tighten. If there is no ground wire (green or copper) from the junction

box, contact a qualied electrician.

FINISHING THE INSTALLATION

Raise canopy (F) to mounting plate (B) and position mounting screws (A) so that they protrude through the openings of

canopy (F). Secure canopy (F) in place with decorative nuts (G). Slide candle sleeves (H) onto sockets (I). Install light bulb

(not included) in accordance with the xture’s specications. Do not exceed the recommended wattage. Your installation

is now complete. Turn on the power and test the xture.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light

and wipe down the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

19074

19075

19076

©2020 Hunter Fan Co. ML031

r_112320

For Models:

Para los Modelos:

Pour les Modèles:

F

E

D

C

B

A

H

I

G

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Hunter 19076 Laurel Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Hunter. They might be able to provide an original manual. Are you looking for the manual of your Hunter 19076 Laurel Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Hunter Lamps
More manuals of Lamps

Frequently Asked Questions about Hunter 19076 Laurel Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.