CONTROL PANEL
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, touch the
control until the cooking zone
displays light up.
To switch o, touch the same control until the displays switch o. All the
cooking zones are deactivated.
If within 10 seconds of switching on, no function is selected, the hob
switches o automatically.
SWITCHING ON AND ADJUSTING COOKING ZONES
Place the pot on the desired cooking zone and switch on the hob. Activate
the selected cooking zone by touching the corresponding “Zone selection
control”. “5” will appear on the display. Slide the nger over the “Power setting
control” to select the required power level, from min. 0 to max. 9. To conrm
the selection wait 10 seconds or touch again the same “Zone selection control”.
DEACTIVATION OF COOKING ZONES
To switch o the cooking zone, select the level “0” with the “Power setting
control”.
The cooking zone switches o and, if still hot, the letter “H” appears on
the zone display.
CONTROL PANEL LOCK
This function locks the controls to prevent accidental activation of the hob.
To activate the control panel lock, touch control; an acoustic signal
sounds and a luminous indicator appears on the display. The control
panel is locked except for the switching o function.
To deactivate the control panel lock, repeat the activation procedure.
The presence of water, liquid spilled from pots or any objects resting on
the controls can accidentally activate or deactivate the control panel lock.
TIMER
The timer can be used to set the cooking time for a maximum of 99
minutes (1 hour and 39 minutes) for all the cooking zones.
Select the cooking zone to be used, touch the timer “–” or “+” controls
and a beep signals the function. The display shows “00”. The Timer value
can be decreased and increased by keeping the nger on the controls
“+” or “–”. After the Timer value selection, the display continue to blink
for 10 seconds before the countdown starts.
When the set time has elapsed, an acoustic signal sounds and the
cooking zone switches o automatically. To deactivate the timer, select
the cooking zone, touch the Timer controls “–” and “+” simultaneously.
Power indicator display
Selected cooking zone indication
(the dot blinks when there is a Timer active on that zone)
IMPORTANT:
• The dot blinking next to the power level display shows that the
Timer function is active on that zone.
• In case of more than one timer active, display shows the timer with
the shorter duration and corresponding indicator blinks.
RESIDUAL HEAT INDICATOR
If the display shows
, the cooking zone is still hot. If the residual
heat indicator of a given cooking zone is lit, that zone can be used, for
example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes o.
IMPORTANT: To avoid a permanent damage the hob:
• do not use pots with bottoms that are not at;
• do not use metal pots with enamelled bottom;
• do not place hot pots/pans over the control panel.
SPECIAL FUNCTION
BUTTON FUNCTION
NAME
VISUAL
INDICATION
DESCRIPTION
Dual/Triple
zone
1 or 2 LEDs
switch on:
The control activates the double or triple
zone (if available). After positioning the
pot/accessory on the chosen cooking
zone, switch on the hob and select the
cooking zone. Select the power level and
touch the control one time to activate
the dual zone or two times to activate the
triple zone. To deactivate the function,
simply touch the same button. LEDs
near the zone display are switched on
only when the function is active for the
selected zone.
Boiling
Display shows:
This function sets the zone maximum
power (for example to quickly bring water
to the boil). After positioning the pot/
accessory on the chosen cooking zone,
switch on the hob, select the cooking
zone and touch the boiling controls. After
6 minutes of usage of this function, the
appliance automatically sets the zone to
level 9. To deactivate the function simply
touch the same control or lower the
power level with “
–
”. It is possible to use
this function in combination with dual/
triple zone function.
Melting
Display shows:
This function sets a power level that
is suitable for slowly melting delicate
products without compromising their
sensory quality (chocolate, butter, etc.).
After positioning the pot/accessory on
the chosen cooking zone, switch on
the hob, select the cooking zone and
touch the power setting control over
the melting icon. The function melting
corresponds to power level “2”.
FIRST TIME USE
After connecting the hob to the electrical power supply, the control panel
is locked. To unlock the control panel, touch the
control for 2 seconds.
The control panel lock indicator switches o and the hob can be used.
Read the “Control panel lock” paragraph for more details.
Timer controls
Zone selection controls and display
On/Off
Melting
Control
panel lock
Dual/Triple zone
Power setting control
EN
Join the conversation about this product
Here you can share what you think about the Hotpoint HR 607 B Hob. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.
reply | This was helpful (1) (Translated by Google)