Manual Horstmann ChannelPlus H37XL Thermostat

Need a manual for your Horstmann ChannelPlus H37XL Thermostat? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 3 comments and has 3 votes with an average product rating of 33/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

BATTERY
The programmer is fitted with a non-rechargeable, long life battery, which will maintain the
programmed time settings for a minimum of ten months with the supply disconnected.
THIS SHOULD BE SUFFICIENT TO COVER POWER INTERRUPTIONS DURING THE LIFE OF THE UNIT.
During power interruptions the display will be blank, after 3 days the current time of day will be lost.
If the programmer is not to be used for a long period of time, to prolong the battery life, the switch
on the rear of the unit should be returned to the BATTERYOFF position.
SERVICE AND REPAIR
This programmer is NOT user serviceable. Please do not dismantle the unit.
In the unlikely event of a fault developing please refer to the RESETTINGTHEPROGRAMMERsection of
this user guide located on page 2. If this fails to resolve the problem please contact a local heating
engineer or a qualified electrician.
QUESTIONSANDANSWERS
The display only reads
‘SWITCH BATTERY ON
The unit display has become frozen
The indicator neon fails to illuminate on
Hot Water or Central Heating Zones
The indicator neon will illuminate but the
pump and/or boiler fails to
operate
There is no display on the
programmer
How do I know if the programmer is still
under warranty
How is the programmer removed from
the wall
When setting the programme times, the
setting ‘bounces’ by 10 minute periods
Turn the battery on.The switch on the rear of the unit must be in either the Fully
Pumped or Gravity position.
This could be due to local electrical interference
Using the RESET procedure may rectify the fault.
Using the RESET procedure may rectify the fault. If the problem persists the programmer
will need replacing.
This may indicate a problem elsewhere in your system;
E.g. A zone valve, etc. please contact a registered installer for advice.
Try the RESET procedure on page 2, if this fails to rectify the problem please have the
mains supply checked
The ChannelPlus XL range comes with a 5 year guarantee from the date of manufacture.
This date is located on the rear of the unit, indicated by a month over a year
WARNING: The ChannelPlus programmer must only be removed from it’s backplate by
either a qualified electrician or heating engineer; The programmer plugs in to a 9 pin
backplate located on the rear of the unit and is secured using 2 screws located on the
top surface of the unit. Undo these screws and pull forward and down in an arc motion
This indicates that you have reached an existing set time period, you will be unable to
set a new ON/OFF time unless there is an alteration to the existing timed period
LEAFLET No P32643
ISSUE 4
Page 4
The following are some of the easy to operate features:-
Flexible 7 Day Control
1 or 2 Hour Boost on each channel.
Advance control gives instant On/Off override
Independent control of 1 Hot Water and 2 Heating Zones
Up to 3 On/Off periods per channel in each 24 Hour operation
Programme options: Auto / All day / On constantly / Off
Horstmann’s ChannelPlus H37XL is the unique Three Channel programmer
which allows up to three operating periods per day, seven days a week,
on two independent Heating and one Hot water zone.
1
5
4
3
2
8
7
9
10
12
11
14
13
15
LCD DISPLAYFEATURES
1 Current TIME OF DAY
2 Day of Week Indicator
3 Switch time SETTING indicator
4 ADVANCE symbol
5 BOOST symbol
6 Current Heating 1 programme
7 Current Heating 2 programme
8 Current Hot water programme
9 Next Heating 1 switch time
10 Next Heating 2 switch time
11 Next Hot water switch time
19 SET slider switch
20 SET Positions
Internal Slide Switch -
located under front cover
17
16
LED INDICATOR
12 Circuit ON indicators
EASY TOUSE PROGRAMMEANDFEATUREBUTTONS
13 Hot water ADVANCE(ENTER) button
14 Heating 1 ADVANCE (PLUS) button
15 Heating 2 ADVANCE button
16 Hot Water BOOST(COPY) button
17 Heating 1 BOOST (MINUS) button
18 Heating 2 BOOST button
All the Central heating and Hot water SELECT
buttons are located under the front cover
6
18
19
20
Page 1
Horstmann Controls Limited
Bristol
BS4 1UP
Website: www.horstmann.co.uk
Download manual in English (PDF, 0.36 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Horstmann ChannelPlus H37XL Thermostat by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Horstmann ChannelPlus H37XL Thermostat?
Yes No
33%
67%
3 votes

Join the conversation about this product

Here you can share what you think about the Horstmann ChannelPlus H37XL Thermostat. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Joseph Brown 16-06-2022
My H37 XL is set for Heating 1 and heating 2 both OFF, and my Water heating is set at 3 different times, But, When the water switches on it also heats Heating 1 but no lights come on . Why is this - would a reset resolve trhre issue?

reply | This was helpful (8)
Help 17-11-2021
Can’t set time

reply | This was helpful (4)
Tommy 02-12-2022
On trying to alter programme times I cannot switch to give the day as pressing + or - results in the boost or advance function being initiated. So unable to choose a day. Am I doing something wrong or is the programmer bust?

reply | This was helpful (2)

More about this manual

We understand that it’s nice to have a paper manual for your Horstmann ChannelPlus H37XL Thermostat. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Horstmann. They might be able to provide an original manual. Are you looking for the manual of your Horstmann ChannelPlus H37XL Thermostat in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Horstmann
Model ChannelPlus H37XL
Category Thermostats
File type PDF
File size 0.36 MB

All manuals for Horstmann Thermostats
More manuals of Thermostats

Frequently Asked Questions about Horstmann ChannelPlus H37XL Thermostat

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the dead zone of a thermostat? Verified

Many modern thermostats have a dead zone. If the temperature deviates less than 4°C from the set temperature, the system will not heat or cool. This so called dead zone of the thermostat prevents the system from turning on and off too often, saving energy.

This was helpful (1756) Read more

What is the best place to mount a thermostat? Verified

The best place for a thermostat is approximately 1,5 meter above the ground. Never place the thermostat nead a radiator or other heat emitting equipment or in direct sunlight. Choose a room that is used often. In most cases this is the living room.

This was helpful (1128) Read more
Manual Horstmann ChannelPlus H37XL Thermostat

Related products

Related categories

×
Download