Home > Bicycles & Mopeds > Bicycle Carriers > Halfords Bicycle Carriers > Halfords High Mount 3 Bicycle Carrier

Manual Halfords High Mount 3 Bicycle Carrier

Name: Halfords High Mount 3 Bicycle Carrier
Brand: Halfords
SKU: High Mount 3
Rating: 100 (1 reviews)

Need a manual for your Halfords High Mount 3 Bicycle Carrier? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Product may differ from images shown

Special Recommendations

Avoid any vehicle bodywork of insufficient

strength, trim and items such as aerofoils or

spoilers.

IMPORTANT! Carrier straps must always be re-

tightened after cycles have been mounted to the

carrier. Straps should be checked routinely for

signs of wear and abrasion, and any worn straps

must be replaced immediately.

After driving for a few miles STOP and check that

all straps are secure and tight. If necessary,

tighten the straps and tidy away any loose ends.

This must be repeated at suitable intervals

depending on the nature of the road.

Do not exceed 45kg maximum load (3 adult

cycles) or 30kg maximum load (2 adult cycles)

when the carrier is used on a booted saloon.

To ensure full compliance with the road traffic

regulations, the use of lighting board/ number

plate is required if your vehicle’s existing

lighting/number plates are obscured by the use of

the carrier.

Drive with care, the handling characteristics of

your vehicle will be affected when carrying cycles,

(e.g. cornering, braking, side winds etc).

Retain these instructions for future reference,

ensure that any other users of the cycle carrier are

familiar with their contents.

The carrier may obstruct the rear window wiper of

your vehicle. DO NOT operate the wiper with the

carrier fitted.

When positioning cycles on the carrier ensure that

they do not project beyond the profile of the

vehicle and that no part of any cycle can touch the

paintwork.

The use of rear mounted cycle carriers may be

restricted in certain countries outside the UK.

Always check with the relevant national tourist

authorities prior to commencing your journey.

Use cloth or foam padding to prevent abrasion

damage occurring between the frames of your

cycles, or from contact between the cycles and

the cycle carrier.

Care must be taken when positioning and loading

the cycle carrier to avoid placing cycle tyres near

the exhaust, and to ensure that a satisfactory

ground clearance is maintained between the

cycles and the road. Extra care should be taken

when negotiating rough road surfaces, humps and

ferry ramps.

All lengths are approximate.

Kit Contents

Panel hook

Chassis hook

Dumbbells

160cm

95cm

Main frame

Please follow instructions carefully to ensure the safety of yourself and other road users.

The initial assembly and fitting of the carrier will take approximately 15 minutes.

Before you begin:

•Due to the contruction of boot lids we recommend only two cycles be carried on saloon

cars with this carrier.

•Make sure all parts are included in the package.

•Ensure that the vehicle boot lid/rear bumper are free from dirt and grime.

High Mount 3 Bike Carrier

Fitting Instructions

Made in the UK

Halfords Ltd, Washford

Redditch, B98 0DE

PI386-02

halfords hi 3 bike 1/2/10 15:13 Page 1

Rating

Let us know what you think about the Halfords High Mount 3 Bicycle Carrier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Halfords High Mount 3 Bicycle Carrier?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Halfords High Mount 3 Bicycle Carrier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Halfords High Mount 3 Bicycle Carrier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Halfords. They might be able to provide an original manual. Are you looking for the manual of your Halfords High Mount 3 Bicycle Carrier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Halfords
Model	High Mount 3
Category	Bicycle Carriers
File type	PDF
File size	0.63 MB

All manuals for Halfords Bicycle Carriers
More manuals of Bicycle Carriers

Frequently Asked Questions about Halfords High Mount 3 Bicycle Carrier

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How fast can I drive with a bicycle carrier attached to my car? Verified

Generally there is no exact limit. However, a bicycle carrier can influence the driving experience. That is why it is advised to not exceed 130 kilometers per hour.

This was helpful (894) Read more