Manual Graco 2M18 Direct Connect Baby Monitor

Need a manual for your Graco 2M18 Direct Connect Baby Monitor? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

Parent Unit
• The battery must be plugged into the Parent
Unit before the unit will be ready for use.
Remove the battery door cover on the Parent
Unit with a key or flat blade screwdriver. Remove
the battery pack from the packaging and plug
into the back of the unit. Place the battery pack
into the recess and press the wire into the slot
on the side. Replace the battery door.
Nursery Unit
• Turn the unit over, and use Phillips screwdriver
to remove the battery door.
• Place 3-AAA (1.5V-LR03) batteries into the
battery compartment. Note the proper
orientation of the batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc), or
rechargeable (ni-cadmium, etc) batteries.
• Place the battery door back on the unit.
• Please remove a dead battery promptly.
A dead battery left in the unit may leak,
damaging your unit.
• Do not attempt to recharge a non-rechargeable
battery.
• A rechargeable battery CANNOT be recharged by plugging the AC adapter into the Nursery Unit.
• Remove the batteries from the unit if it is no longer being used or will be stored for an extended period
of time.
• The Parent Unit(s) can use either the rechargeable battery that comes with the unit or standard 120 volt
AC household current. The Nursery Unit uses 3-AAA (1.5V-LR03) batteries or standard 120 volt AC
household current.
• To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the Parent
Unit and the back of the Nursery Unit. Then plug adapter into a standard wall outlet.
• Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment
under any circumstances.
• If units do not work, check that AC adapters are plugged into working outlets.
• When electricity is off (from a power failure, etc.), the Nursery Unit will operate on 3-AAA (1.5V-LR03)
batteries. If the Power LED is not lit, turn the power off and then back on to the Nursery Unit. A green
LED indicates that the batteries are fine. A red LED indicates that the batteries are low. If the LED does
not light at all, then replace the batteries. The Parent Unit will operate if the rechargeable battery is
charged.
Battery Installation
Using AC Adapters
Plug in cord
3
Batteries should be disposed of properly
by recycling.
• Remove and discard static cling labels.
Static Cling Labels
• In case you are experiencing some interference, the channel on the Nursery Unit can
be changed by pressing the “ch” button on the front of the unit. The Parent Unit will
automatically scan all of the available channels until it locks on to the Nursery Unit.
If you are still experiencing interference, press the channel button on the front of the
Nursery Unit up to 6 times until a good channel is found.
Selecting Channels
Download manual in English (PDF, 0.97 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Graco 2M18 Direct Connect Baby Monitor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Graco 2M18 Direct Connect Baby Monitor?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Graco 2M18 Direct Connect Baby Monitor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Graco 2M18 Direct Connect Baby Monitor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Graco. They might be able to provide an original manual. Are you looking for the manual of your Graco 2M18 Direct Connect Baby Monitor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Graco
Model 2M18 Direct Connect
Category Baby Monitors
File type PDF
File size 0.97 MB

All manuals for Graco Baby Monitors
More manuals of Baby Monitors

Frequently Asked Questions about Graco 2M18 Direct Connect Baby Monitor

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Why is the range of my baby monitor less than the brochure/manual describes? Verified

Brands tend to state a range that is based on use without obstacles like walls or a distance that covers multiple floors. If the range is insufficient, try to place the baby monitor so that it has minimum obstacles.

This was helpful (657) Read more

When listening to my baby I can clearly hear breathing, but the baby monitor doesn't let me hear this. Why is that? Verified

This is due to the sensitivity of the baby monitor. Adjust the settings to be more sensitive and pick up quieter sounds.

This was helpful (336) Read more
Manual Graco 2M18 Direct Connect Baby Monitor

Related products

Related categories