Home > Audio, TV & Photo > Gimbals > Feiyu Gimbals > Feiyu G4S Gimbal

Manual Feiyu G4S Gimbal

Need a manual for your Feiyu G4S Gimbal? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

18350

MINI-USB

10Pin

2 3

Joystick

360°

For other functions

Switch operating modes

Turn on/off

The working mode and

function can be identified

by the LED status

Joystick

Video Output Cable

Read the GoPro SD card and Charge the GoPro

GoPro Mini to Micro port

SD reading switch

GoPro charging

switch

OFF

USB Cable

Read the GoPro SD card and

Charge the GoPro without

dismount the GoPro

When the gimbal and GoPro

are powered on , connect

the Analog Monitor to the

function port with the Video

Output Cable ,to output the

video to the Analog Monitor.

G4S 3-Axis handheld gimbal has a mini to micro port, It can connect the GoPro with a micro usb cable. You can read the

GoPro SD card and Charge the GoPro without dismount the GoPro, and it works when the gimbal is powered off.

The GoPro charging switch and the SD card reading switch works independently, and it works when the gimbal is

powered off The default is off.

Rolling

Tilting

Panning

Function Button

（ ON / OFF ）

1/4 Inch Screw Hole

Suitable for GoPro 4/GroPro 3+/GroPro 3

If the indicator light flashes red,

the Gimbal will not work correctly

due to an error.

Attention !

Beginner Guide

Product Appearance Instructions

Video Output

Operation Instructions

Inversion Mode

When in any working mode, press the function

button for three times in succession, the Gimbal will enter into the

inversion mode and switch to the Heading following mode

automatically. Invert the Gimbal to capture more excited

scenes easily by switching mode combination. When in inversion

working condition press the function button for three times in

succession to reset the Gimbal back to the original state.

Manual Pulling Locking

The pitching can be adjusted 8 seconds

after the Gimbal has been started. Within the Heading Follow and Heading

Lock Mode the pitching can be adjusted to the desired angle manually,

wait in this position up to 0.5 second until the current angle is adjusted.

Reset

Indicator Explanation

LED Status

Explain

Blue light flashes

three times

Full Power

Blue light flashes

twice

Enough Power

Blue light flashes

once

Low Power

Blue light keeps

flashing

No Power

If any comments or suggestions please do not hesitate

to e-mail us directly : [email protected]

Remove the power switch

cap, insert two 18350

batteries into the handle.

Mount the camera carefully to

the mounting bracket and make

sure the camera is firmly connected

with the MINI-USB 10Pin

Press the clip at both ends of the

clip, clip it as above picture.

Power On / Off

Assembly the clipMount the CameraInsert The Batteries

Joystick

Adjust the angle

of the gimbal

with the joystick

when the angle

is locked.

Function

Interface

Indicator

Working Mode Instructions

Camera stays in its current orientation.

Panning Mode

Camera is permitted to pan left or right.

Camera is permitted to pan left or Panning and Tilng Mode

Lock Mode

Vertical tilts or rolls are restricted.

right and tilt up and down. Rolls are restricted.

All panning, tilting and rolls are restricted.

Function

Interface

Analog Monitor

(

Equipped By Users )

G4S 3-Axis Handheld Gimbal

Function Button

( Indicator Light )

Version 1.0

Power On: Single tap the function button,the

gimbal shall be powered on after 2 seconds.

Power Off: Hold down the function button for

3 seconds to turn off the gimbal.

Attention: Turn the gimbal on

after ensuring the camera is secure.

Reset the tilting axis of the gimbal to initial orientation and initial mode.

Operation

Double tap

Single tap

LED status Mode / Status

Single flash

Double flashes

Function

Explanation

Panning Mode / Lock Mode

Panning and Tilting Mode

Panning mode

Panning and Tilting mode

Lock mode / Initialize the gimbal

Triple tap

Single tap to switch between panning mode and lock mode

Under panning and tilting mode, single tap to switch to lock mode

Always on

Inversion Mode

It is possible to switch to other modes under inversion mode,

triple tap again to exit inversion mode and reset

Long press for 3 seconds

Power off

Quadruple tap

Flash quickly

Rolling angle adjustment /

Initialization failure / Malfunction

Reset

Tap button for six times Please refer to“Gimbal Horizontal Angle Adjustment”for operations

Single tap again to awake the gimbal, or triple tap

to initialize the gimbal

Rolling angle adjustment

Long press for 1 second Standby

Three flashes Standby

Mode

Panning mode

Panning and

Tilting mode

Lock mode

Controllable angle of joystick

Tilting angle

Uncontrollable

Tilting and panning angle

Movement of joystick

Up, Down

Uncontrollable

Up, Down, Left, Right

Operating Instructions of Function Button

Indicator

status

Joystick Control

Reset the tilting axis of the gimbal to initial orientation and initial mode.

In standby model, keep the gimbal in power-up state, the motor

stops working, the indicator light flashes for three times, and single

tap again to wake the gimbal.

Standby

Other Function

( 1 ) Please install the suitable camera first before power on the Gimbal.

( 2 ) Please turn off the power when not in use.

GND

Video

Rating

Let us know what you think about the Feiyu G4S Gimbal by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Feiyu G4S Gimbal?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Feiyu G4S Gimbal. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Feiyu G4S Gimbal. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Feiyu. They might be able to provide an original manual. Are you looking for the manual of your Feiyu G4S Gimbal in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.