Home > Do-It-Yourself > Mitre Saws > Evolution Mitre Saws > Evolution RAGE3-DB Mitre Saw

Manual Evolution RAGE3-DB Mitre Saw

Need a manual for your Evolution RAGE3-DB Mitre Saw? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

www.evolutionbuild.com

Instruction Manual

Read instructions before operating this tool.

Please read these operating and safety instructions carefully

and completely. For your own safety, before using this

equipment check that the voltage is correct and that all

handles and parts are ﬁrmly secured. If you are uncertain

about any aspect of using this equipment, please contact our

Technical Helpline.

Technical Helpline UK: 0870 609 2297

Technical Helpline USA: 1-866-EVO-TOOL

RAGE3 Multipurpose Sliding Mitre Saw

Congratulations on your purchase of an Evolution Power

Tools Rage 3 Sliding Mitre Saw. Please complete and mail

your product registration card. Doing so will validate your

machine’s warranty period and ensure prompt service if

needed. We sincerely thank you for selecting a product from

Evolution Power Tools.

To reduce the risk of electric shock, this equipment is tted

with an approved cord and plug for its intended Country of

use. Do not change the plug in any way.

IMPORTANT

IMPORTANT SAFETY INSTRUCTIONS

WARNING: For your own safety.

Read instruction manual before operating mitre saw.

1. KEEP GUARDS IN PLACE and in working order.

2. REMOVE ADJUSTING KEYS AND WRENCHES. Form

habit of checking to see that keys and adjusting wrenches

are removed from tool before turning it on.

3. KEEP WORK AREA CLEAN. Cluttered areas and benches

invite accidents.

4. DON’T USE IN DANGEROUS ENVIRONMENT. Don’t

use power tools in damp or wet locations, or expose them to

rain. Keep work area well lit.

5. KEEP CHILDREN AWAY. All visitors should be kept a safe

distance from work area.

6. DON’T FORCE TOOL. It will do the job better and safer at

the rate for which it was designed.

7. USE PROPER EXTENSION CORD. Make sure your

extension cord is in good condition. When using an extension

cord, be sure to use one heavy enough to carry the current

your product will draw. An undersized cord will cause a drop

in line voltage resulting in loss of power and overheating.

8. WEAR PROPER APPAREL. Do not wear loose clothing,

gloves, neckties, rings, bracelets, or other jewellery which may

get caught in moving parts. Nonslip footwear recommended.

Wear protective hair covering to contain long hair.

9. ALWAYS USE SAFETY GLASSES. Also use face or dust

mask if cutting operation is dusty. Everyday eyeglasses only

have impact resistant lenses, they are NOT safety glasses.

10. SECURE WORK. Use clamps to hold work when

practical. It’s safer than using your hand and it frees both

hands to operate tool.

11. DON’T OVERREACH. Keep proper footing and balance

at all times.

12. MAINTAIN TOOLS WITH CARE. Keep tools sharp and

clean for best and safest performance. Follow instructions

for lubricating and changing accessories.

13. DISCONNECT TOOLS before servicing and when

changing accessories, such as blades.

14. REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure switch is in off position before plugging in.

15. USE RECOMMENDED ACCESSORIES. Only use

genuine Evolution accessories.

16. NEVER STAND ON TOOL. Serious injury could occur if the

tool is tipped or if the cutting tool is unintentionally contacted.

17. CHECK DAMAGED PARTS. Before further use of

the tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function - check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other conditions that may affect its

operation. A guard or other part that is damaged should be

properly repaired or replaced.

18. Keep hands out of path of saw blade.

19. Never reach around saw blade.

20. Turn off tool and wait for saw blade to stop before

moving workpiece or changing settings.

21. Disconnect power before changing blade, servicing or

cleaning.

22. To reduce the risk of injury, return carriage to the full rear

position after each crosscut operation.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

ADDITIONAL SAFETY INSTRUCTION.

1. Although compact, this saw is heavy. To reduce the risk of

back injury, get help whenever you have to lift the saw.

2. To reduce the risk of back injury, hold the tool close to your

body when lifting. Bending your knees so you can lift with

your legs, not your back. Lift by using the handhold areas at

each side of the bottom of the base.

3. Never carry the mitre saw by the power cord or the trigger

grip of the handle. Carrying the tool by the power cord could

cause damage to the insulation or the wire connections

resulting in electric shock or ﬁre.

4. Before removing the saw from the carton tighten the slide

lock knob to guard against sudden movement.

5. Place the saw on a secure stationary work surface and

check the saw over carefully.

6. Warning. Do not stare directly at the laser beam. A hazard

may exist if you deliberately stare into the beam, please

observe all safety rules as follows.

• The laser beam shall not be deliberately aimed at personnel

and shall be prevented from being directed towards the eyes

of a person.

• Always ensure the laser beam is aimed at the workpiece

without reﬂective surfaces, i.e. wood or rough coated

surfaces are acceptable.

• Do not change the laser light assembly with a different type.

GENERAL SAFETY RULES

Rating

Let us know what you think about the Evolution RAGE3-DB Mitre Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Evolution RAGE3-DB Mitre Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Evolution RAGE3-DB Mitre Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Evolution RAGE3-DB Mitre Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Evolution. They might be able to provide an original manual. Are you looking for the manual of your Evolution RAGE3-DB Mitre Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Evolution
Model	RAGE3-DB
Category	Mitre Saws
File type	PDF
File size	1.28 MB

All manuals for Evolution Mitre Saws
More manuals of Mitre Saws

Frequently Asked Questions about Evolution RAGE3-DB Mitre Saw

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Do I need to wear hearing protection when using a mitre saw? Verified

Yes you should. Although the amount of noise produced by a mitre saw can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (14) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (10) Read more