Home > Household appliances > Air Conditioners > Danby Air Conditioners > Danby DPA120CBIMBDB-6 Air Conditioner

Manual Danby DPA120CBIMBDB-6 Air Conditioner

Need a manual for your Danby DPA120CBIMBDB-6 Air Conditioner? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SAVE THESE INSTRUCTIONS!

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

necessary to continue operation, an adequate temporary

solution shall be used. This shall be reported to the owner

of the equipment so all parties are advised. Initial safety

checks shall include:

• That capacitors are discharged. This shall be done in

a safe manner to avoid possibility of sparking.

• That no live electrical components and wiring are

exposed while charging, recovering or purging the

system.

• That there is continuity of earth bonding.

Sealed electrical components shall be replaced

1. During repairs to sealed components, all electrical

supplies shall be disconnected from the equipment being

worked upon prior to any removal of sealed covers, etc.

If it is absolutely necessary to have an electrical supply to

equipment during servicing then a permanently operating

form of leak detection shall be located at the most critical

point to warn of a potentially hazardous situation.

2. To ensure that by working on electrical components

the casing is not altered in such a way that the level of

protection is affected, particular attention shall be paid to

the following:

• Damage to cables, excessive number of connections,

terminals not made to original specication, damage to

seals, incorrect tting of glands, etc.

• Ensure the apparatus is mounted securely.

• Ensure that seals or sealing materials have not degraded

such that they no longer serve the purpose of preventing

the ingress of ammable atmospheres. Replacement

parts shall be in accordance with the manufacturer’s

specications.

Note: The use of silicon sealant may inhibit the effectiveness

of some types of leak detection equipment. Intrinsically safe

components do not have to be isolated prior to working on

them.

Intrinsically safe components must be replaced

Do not apply any permanent inductive or capacitance loads

to the circuit without ensuring that this will not exceed the

permissible voltage and current permitted for the equipment

in use. Intrinsically safe components are the only types that

can be worked on while live in the presence of a ammable

atmosphere. The test apparatus shall be at the correct

rating. Replace components only with parts specied by

the manufacturer. Other parts may result in the ignition of

refrigerant in the atmosphere from a leak.

Cabling

Check that cabling will not be subject to wear, corrosion,

excessive pressure, vibration, sharp edges or any other

adverse environmental effects. The check shall also take into

account the effects of aging or continual vibration from sources

such as compressors or fans.

Detection of ammable refrigerants

Under no circumstances shall potential sources of ignition be

used in the searching for or detection of refrigerant leaks. A

halide torch or any other detector using a naked ame shall

not be used.

Leak detection methods

The following leak detection methods are deemed acceptable

for systems containing ammable refrigerants:

• Electronic leak detectors shall be used to detect ammable

refrigerants but the sensitivity may not be adequate or

may need recalibration. Detection equipment shall be

calibrated in a refrigerant-free area. Ensure that the

detector is not a potential source of ignition and is suitable

for the refrigerant used.

• Leak detection equipment shall be set at a percentage of

the LFL of the refrigerant and shall be calibrated to the

refrigerant employed and the appropriate percentage of

gas (25% maximum) is conrmed.

• Leak detection uids are suitable for use with most

refrigerants but the use of detergents containing chlorine

shall be avoided as the chlorine may react with the

refrigerant and corrode the copper or pipe-work.

• If a leak is suspected, all naked ames shall be removed

or extinguished.

• If a leakage of refrigerant is found which requires

brazing, all of the refrigerant shall be recovered from the

system or isolated by means of shut off valves in a part of

the system remote from the leak. Removal of refrigerant

shall be according to Removal and evacuation.

Removal and evacuation

When breaking into the refrigerant circuit to make repairs or

for any other purpose conventional procedures shall be used.

However, it is important that the best practice is followed since

ammability is a consideration. The following procedures shall

be adhered to:

• Safely remove refrigerant following local and national

regulations;

• Evacuate;

• Purge the circuit with inert gas (optional for A2L);

• Evacuate (optional for A2L);

• Continuously ush or purge with inert gas when using

ame to open circuit: and

• Open the Circuit.

Rating

Let us know what you think about the Danby DPA120CBIMBDB-6 Air Conditioner by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Danby DPA120CBIMBDB-6 Air Conditioner?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Danby DPA120CBIMBDB-6 Air Conditioner. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Danby DPA120CBIMBDB-6 Air Conditioner. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Danby. They might be able to provide an original manual. Are you looking for the manual of your Danby DPA120CBIMBDB-6 Air Conditioner in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Danby
Model	DPA120CBIMBDB-6
Category	Air Conditioners
File type	PDF
File size	6.05 MB

All manuals for Danby Air Conditioners
More manuals of Air Conditioners

Frequently Asked Questions about Danby DPA120CBIMBDB-6 Air Conditioner

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How often should I clean or replace the filters in my air conditioner? Verified

It's advisable to check the filters of your air conditioner 4 times a year. Dirty filters can be cleaned with the use of a vacuum cleaner or can be washed, depending on which type they are. During maintenance a professional should judge whether it is time to replace the filters.

This was helpful (2746) Read more

What does BTU stand for? Verified

BTU stands for British Thermal Unit. This is unit to indicate the capacity to cool.

This was helpful (986) Read more

Does every air conditioner also function as a dehumidifier? Verified

The cold air produced by an air conditioner often has a relatively low humidity. However, the effect is less than when using an actual dehumidifier. Some air conditioners do have a special feature to dehumidify the air.

This was helpful (752) Read more

What is R-410A? Verified

R-410A is a cooling agent that is used in appliances that cool up to 0°C, like refrigerators and air conditioners. It is the replacement of older cooling agents and does not damage the ozon layer.

This was helpful (517) Read more

Does an air conditioner have a negative influence on air quality? Verified

If the air conditioner has been properly maintained then it will have no influence on air quality. If for example a filter hasn't been replaced for a long time, or other maintenance has not been performed, than an air conditioner can produce dirty air.

This was helpful (372) Read more

What is the best place to mount the indoor unit of a split-type air conditioner? Verified

This depends on the space, but in general the following rules can be followed. Make sure that there is nothing obstructing the airflow. Make sure the location is accessible for maintenance. Mount the unit at least 2 meters from the ground.

This was helpful (370) Read more