Manual Coleman Elite Weathermaster 6 Tent

Manual

Self-rolling Windows

CAUTION: “Springs” may have sharp edges. Handle with care to avoid

injury. Keep out of reach of children.

NOTE: Carefully unroll metal “springs” stored in bag with stakes. The color

marking on each “spring” should match the color of the fabric “flag” sewn

to the window or door sleeve opening. (Fig. 24)

1. Locate sleeve(s) in window panel, open hook &

loop fastener; then insert “spring(s)” with match-

ing color marking. (Fig.24 & 25)

NOTE: When inserting into the sleeve(s), the

color marking on the “spring(s)” should always

face the operator.

2. Close hook & loop fastener to secure.

3. Before unzipping and opening the window,

push in at top to engage “spring(s)” to activate

the self-rolling feature. (Fig. 26)

4. Unzip to allow the window panel to roll down

automatically; zip back to close window panel.

(Fig. 27 & 28)

NOTE: Repeat steps above for inserting the color

matching “spring(s)” into sleeve(s) for the rest of

the windows.

3. Insert tapered metal tip on Awning

Pole into grommet located on web

strap clipped to center Leg Pole.

(Fig. 19)

4. Go to opposite center Leg Pole on

other side of door and gradually

apply pressure to the pole forming

an arch. Insert metal tip into the

grommet.

5. Locate all hook & loop fasteners on underside

of Rainfly and wrap around Leg Poles and

Awning Pole locations. (Fig. 20)

Cooler Access

The smaller zippered opening at the side of tent is

designed for added ventilation and easy access to

your beverage cooler.

1. To use as a vent, unzip flap to expose screen.

2. To use as a cooler access, unzip other flap to

make an avenue to bring beverages into tent.

(Fig. 32)

STITCH LINE

Attaching Room Divider

1. Divider Panel can be installed through

center of the tent by inserting the

toggles through

top and bottom

fabric loops as

shown.

(Fig. 29 & 30)

To Store

1. All “springs” must be rolled up and placed in bag with stakes.

2. All poles and stakes must

be placed in the storage bag to prevent

damage to the fabric items placed in the carry case.

3. Make sure tent is clean and dry before placing in carry case.

4. Remove rainfly, spread out on floor of tent, then unzip door & vents

before taking tent down for storage.

5. Neatly fold tent to width of pole storage bag, place on tent, roll

tightly, and place in carry case.

5. Store in a clean, dry area.

Electrical Cord Access

1. Unzip the access panel in the lower

left corner of tent and bring in an

electrical cord.

NOTE: Use only UL approved cords

rated for outdoor usage. (Fig. 31)

Fig. 29

Fig. 32

Fig. 31

Fig. 22

Fig. 20

Fig. 23

Fig. 19

Grommet

End Leg

Pole

Location

7. Loop ends of guylines over stakes, stretch tight, then hammer into

ground at an angle as shown. (Fig. 23 & 23A)

Awning Pole

To Attach Rainfly

1. Drape Rainfly over tent. Make sure seams on Rainfly are facing down

and centered over poles of the tent. (Fig. 17)

NOTE: Hook and loop fasteners, located on seams of underside of

Rainfly, should be centered over Ridge Poles.

Fig. 17

Rainfly

Door

Sleeve

Fig. 18

2. Assemble thin, black, shock-corded

Awning Pole with metal tips; then

insert through sleeve in Rainfly above

door. (Fig. 18)

Awning

Pole

Sleeve

Fig. 30

Divider

Panel

Top

Fabric

Loops

Fig. 21

Center

Leg Pole

Location

23A

Guyline

Door

Window

Panel

Window Panel

Push in at top to

engage “spring(s)”

Color

Dot

Fig. 28

Fig. 24

Fig. 25

Sleeves

Sleeve

Fig. 27

Fig. 26

6. Insert metal hook on

elastic straps on

Rainfly into the hole

on each Leg Pole.

(Fig. 21 & 22)

Self-rolling Windows

(continued)

CAUTION: All “springs” must be removed from sleeves before tearing

down tent to avoid damage to the tent fabric or part. To avoid injury,

carefully roll up “springs”. Keep out of reach of children. Store rolled

“springs in bag with stakes.

Color

“Flag”

Tent Lighting System

Your tent comes pre-wired with the Coleman

®

Tent Lighting

System. See manual that came with the light and carefully read

all instructions before use then save for future reference.

Things You Should Know:

• Under certain conditions (cold weather, high humidity, etc.) condensa-

tion will form on the inside of your tent. Condensation is caused by water

vapor from your breath, perspiration, or any wet clothing inside the tent.

It is NOT LEAKAGE through the tent fabric. It can be minimized by

removing wet clothing from your tent and by providing good ventila-

tion through the tent.

• Tree limbs, tree sap, bird droppings, or moisture steadily dripping off

tree limbs can cause damage to the tent fabric and its coating resulting

in leaks or loss of flame-resistant properties.

• Never store tent, even for a short period of time, without drying it

thoroughly and brushing off caked dirt. Do not pack stakes or poles

inside your tent. Use a separate storage bag.

• Stakes should be removed by pulling on the stake itself. NEVER PULL ON

THE TENT TO REMOVE STAKES AS THIS COULD RESULT IN PROPERTY

DAMAGE OR PERSONAL INJURY.

• Tent poles should not be left telescoped together during storage.

• Do not leave your tent set-up for weeks at a time. Be aware that exposure

to ultraviolet rays from the sun can seriously damage material and/or

cause it to become discolored.

WARNING: Keep all flame and heat sources away

from this tent fabric.

This tent meets the flammability requirements of CPAI-84. The

fabric may burn if left in continuous contact with any flame source.

The application of any foreign substance to the tent fabric may

render the flame-resistant properties ineffective.

Color “Flag”

The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278 • www.coleman.com

MADE IN CHINA • PRINTED IN CHINA

© 2008 The Coleman Company, Inc.

Coleman

®

, , , and Weathermaster

®

are registered trademarks of

The Coleman Company, Inc.

4010003995 (20081030)

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Coleman Elite Weathermaster 6 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Coleman. They might be able to provide an original manual. Are you looking for the manual of your Coleman Elite Weathermaster 6 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Coleman Tents
More manuals of Tents

Frequently Asked Questions about Coleman Elite Weathermaster 6 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Coleman Octagon 98 Tent

Manual

Coleman Hooligan 4 Tent

Manual

Coleman Galiano 4 Tent

Manual

Coleman Rondeau 3 Tent

Manual

Coleman Galiano 2 Tent

Manual

Coleman Evanston 6 Tent

Manual

Coleman Bi Space 400 Tent

Manual

Coleman Vela Tent

Related categories