Home > Do-It-Yourself > Welders > Clarke Welders > Clarke MIG 152 Welder

Manual Clarke MIG 152 Welder

Need a manual for your Clarke MIG 152 Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SETTING THE DRIVE ROLLER SIZE

1. Loosen the tensioning knob and

pivot it towards you

2. Lift up the arm.

3. Take hold of the triangular knob

on the drive roller cover and

rotate it 90°anticlockwise to

release it.

4. Pull the roller retainer off the drive

spindle to reveal the roller.

5. Pull the roller off the drive spindle.

• The groove size is stamped on

the corresponding side of the

roller. Select the groove size

according to the size of the

wire you are using and put the

roller back on the spindle with

your chosen side facing you.

6. Replace the drive roller cover

back onto the drive spindle with

the opening facing right.

7. Ensure that the flanges at the base of the drive roller cover, seat fully into

the circular recess in the main moulding and then rotate the drive roller

cover through 90° to lock it in place.

THREADING THE WIRE

IMPORTANT: Do not release the tension on the wire as it will unravel causing

feeding problems later.

1. Pull out the end of the wire from the spool, taking care not to release the

tension.

• We recommend you cut off and discard the first 10 cm of wire from

the spool to avoid burrs and then straighten the next 15 cm of wire

to help with feeding.

2. Loosen the tensioning knob and pivot it towards you.

3. Lift up the arm.

Rating

Let us know what you think about the Clarke MIG 152 Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke MIG 152 Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke MIG 152 Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke MIG 152 Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke MIG 152 Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	MIG 152
Category	Welders
File type	PDF
File size	4.56 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke MIG 152 Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more