Home > Do-It-Yourself > Welders > Clarke Welders > Clarke MIG 152 Welder

Manual Clarke MIG 152 Welder

Need a manual for your Clarke MIG 152 Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FITTING THE HANDLE

1. Fit the 2 handles together and

secure to the top of the welder

using the screws and washers

supplied.

MOUNTING THE WELDING WIRE SPOOL

NOTE: Spools of welding wire are available from your Clarke Dealer.

1. Open the side panel, by pushing

the latch down and allowing the

side panel to drop down.

2. Remove the locking knob and

retaining disc.

3. Place the spool of welding wire

(not supplied) over the spindle so

that it sits on the spring.

• Do not release the tension on

the wire as it will unravel causing feeding problems later.

• The wire will feed off the spool anticlockwise from the bottom of the

reel.

• The spool must be fitted with the correct orientation otherwise it will

not feed correctly.

Warning: Ensure that the welder is not connected to the mains supply.

Rating

Let us know what you think about the Clarke MIG 152 Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke MIG 152 Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke MIG 152 Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke MIG 152 Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke MIG 152 Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	MIG 152
Category	Welders
File type	PDF
File size	4.56 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke MIG 152 Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more