Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS800C Table Saw

Manual Clarke CTS800C Table Saw

Need a manual for your Clarke CTS800C Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

17. Remove the rip fence when crosscutting. Never use the rip fence as a cut-

off gauge when crosscutting.

18. Knock out any loose knots from the workpiece before you begin to cut.

19. Provide adequate support to the rear and the sides of the saw table for

long or wide workpieces.

20. NEVER leave the saw running unattended. Turn the power off and do not

leave the saw until it comes to a complete stop.

21. Before using the saw on an actual workpiece, let it run for a few moments.

Watch for vibration or wobbling that could indicate poor installation or a

poorly balanced blade.

22. Always hold work firmly against the mitre gauge or rip fence.

23. NEVER stand or have any part of your body in line with the path of the saw

blade. keep your hands out of the saw blade path.

24. Feed work into the blade against the direction of rotation only.

25. NEVER attempt to free a stalled saw blade without first turning the saw off.

Turn the power switch off immediately to prevent motor damage.

26. Avoid awkward operations and hand positions where a sudden slip could

cause your hand to move into the saw blade.

27. Avoid abrupt, fast feeding. Feed as slowly as possible when cutting hard

workpieces. Do not bend or twist the workpiece while feeding. If you stall or

jam the blade in the workpiece, turn the table saw off immediately. Unplug

the saw, then clear the jam.

28. NEVER remove cut-off pieces near the blade or touch the blade guard

while the blade is running.

SAW BLADES

1. The maximum speed of the saw blade must always be equal to or greater

than the no-load speed of the table saw as specified on the rating plate.

2. Only use saw blades recommended by the manufacturer and which are

the exact bore and diameter required for this machine. Do not use any

spacers to make a blade fit onto the spindle. Use only the blades specified

in this manual, which are manufactured in accordance with EN 847-1

standards.

3. Clean the spindle, retaining discs (especially the installing surface) and

retaining bolt before installing the blade. Poor installation may cause

vibration/wobbling or slippage of the blade.

4. DO NOT use saw blades which are damaged or deformed.

5. Take care that the selection of the saw blade is suitable for the material to

be cut.

Rating

Let us know what you think about the Clarke CTS800C Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS800C Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS800C Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS800C Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS800C Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.