Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS800C Table Saw

Manual Clarke CTS800C Table Saw

Need a manual for your Clarke CTS800C Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

35. Turn off and unplug the saw before cleaning. Use a brush or compressed

air to remove chips or debris — DO NOT use your hands.

36. Disconnect the saw from the mains supply before changing blades or

carrying out maintenance.

37. Keep blades sharp and clean for better and safer performance. Inspect

power cables periodically and if damaged have them repaired.

38. Repairs should only be carried out by qualified persons using original spare

parts, otherwise this may result in considerable danger to the user.

39. Keep handles dry, clean and free from oil and grease.

40. Unplug the saw - switch off and wait for the blade to come to a complete

standstill before leaving it unattended.

ADDITIONAL SAFETY RULES FOR TABLE SAWS

1. The thickness of the saw blade must be greater than the thickness of the

riving knife.

2. DO NOT stand on the table saw.

3. During transportation make sure that the upper part of the saw blade is

covered by the guard.

4. DO NOT use the guard for handling or transportation.

5. Check that the workpiece is properly supported. Always provide additional

support for long workpieces.

6. DO NOT exert side pressure on the saw blade.

7. Make sure that the blade rotates in the correct direction and that the teeth

are pointing to the front of the saw.

8. DO NOT apply lubricants to the blade when it is running.

9. NEVER reach around or over the saw blade. NEVER reach for a workpiece

until the saw blade has completely stopped.

10. Make sure that the blade and retaining discs are clean. Tighten the

retaining screw securely.

11. Keep the saw blade sharp.

12. Make sure that the riving knife is adjusted to the correct distance from the

blade.

13. NEVER operate the saw without the guard in place.

14. DO NOT use abrasive discs or diamond cutting wheels.

15. Rebating, slotting or grooving is not allowed.

16. DO NOT use a moulding head cutter with this saw.

Rating

Let us know what you think about the Clarke CTS800C Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS800C Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS800C Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS800C Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS800C Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.