Home > Garden & Terrace > Water Pumps > Clarke Water Pumps > Clarke CBM 130SS Water Pump

Manual Clarke CBM 130SS Water Pump

Need a manual for your Clarke CBM 130SS Water Pump? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ELECTRICAL CONNECTIONS

WARNING

THIS EQUIPMENT MUST BE EARTHED

This appliance, which is provided with a 3-pin BS 1363 plug, should be connected

to a standard domestic 13 amp, 230 volt (50Hz), electrical supply and we strongly

recommend that this be done through a Residual Current Device (RCD).

Should the plug require renewing at any time, the wires should be connected in

accordance with the following colour code:

Green & Yellow .............. Earth or marked with a letter “E” or Earth symbol “ ”

Blue .................................. Neutral or terminal marked with a letter “N”

Brown ..............................Live or terminal marked with a letter “L”

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (13 amps)

and this replacement must be ASTA approved to BS1362.

IMPORTANT:

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.

non-rewirable) please note:

1. The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local dealer or most

electrical stockists.

We strongly recommend that this machine is connected to the mains

supply through a Residual Current Device (RCD).

EXTENSION CABLES

Ensure that extension cable insulation is rubber or neoprene, and that the cross

section of each conductor is at least 2.5mm

. The maximum length of the cable

should not exceed 25 Metres.

If the electrical connections are outdoors, then the plug AND socket MUST be of a

BS approved waterproof design.

WARNING

DO NOT ATTEMPT ELECTRICAL INSTALLATION WORK IF YOU ARE IN ANY DOUBT AS

TO HOW IT SHOULD BE DONE PROPERLY. CONSULT A QUALIFIED ELECTRICIAN.

Download manual in English (PDF, 4.39 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Clarke CBM 130SS Water Pump by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CBM 130SS Water Pump?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CBM 130SS Water Pump. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CBM 130SS Water Pump. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CBM 130SS Water Pump in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.