Home > Miscellaneous > Watches > Casio Watches > Casio WS-1700H-1AVEF Watch

Manual Casio WS-1700H-1AVEF Watch

Need a manual for your Casio WS-1700H-1AVEF Watch? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Operation Guide 3562

EN-29

3. While a setting is flashing, use B and D to change it as described below.

Screen To do this: Do this:

Change the hours or minutes

Use B (–) and D (+).

Toggle auto-repeat on (On) and off (OF)

Press D.

x To specify a countdown start time of 24 hours, set 0:00.

4. Press A to exit the setting screen.

x The auto-repeat on indicator (

) is displayed on the Timer Mode screen while

this function is turned on.

x Frequent use of auto-repeat and the alarm can run down battery power.

EN-28

To set up the timer

1. While the countdown start time is on the display in the

Timer Mode, hold down A until the hour setting of the

countdown start time starts to flash, which indicates

the setting screen.

x If the countdown start time is not displayed, use the

procedure under “To use the timer” to display it.

2. Press C to move the flashing in the sequence shown

below to select other settings.

CCC

Hours Auto-repeatMinutes

EN-27

To use the timer

Press D while in the Timer Mode to start the countdown timer.

x When the end of the countdown is reached and auto-repeat is turned off, the alarm

sounds for 10 seconds or until you stop it by pressing any button. The countdown

time is automatically reset to its starting value after the alarm stops.

x When auto-repeat is turned on, the countdown will restart automatically without

pausing when it reaches zero. The alarm sounds in order to signal when the

countdown reaches zero.

x The countdown timer measurement operation continues even if you exit the Timer

Mode.

x Press D while a countdown operation is in progress to pause it. Press D again to

resume the countdown.

x To completely stop a countdown operation, first pause it (by pressing D), and

then press A. This returns the countdown time to its starting value.

EN-26

Timer

You can set the countdown timer within a range of

one minute to 24 hours. An alarm sounds when the

countdown reaches zero.

x You can also select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

x All of the operations in this section are performed in the

Timer Mode, which you can enter using C (page EN-9).

Timekeeping Mode time

Hours

Minutes

Seconds

EN-25

To measure times with the stopwatch

Elapsed Time

D D D A

Start Stop Resume Stop Reset

Split Time

A A D A

Start Split

(SPL displayed)

Split release Stop Reset

Two Finishes

A D A A

Start Split

First runner

finishes.

Display time of

first runner.

Stop

Second runner

finishes.

Split release

Display time of

second runner.

Reset

EN-24

Stopwatch

The stopwatch lets you measure elapsed time, split

times, and two finishes.

x The display range of the stopwatch is 23 hours,

59minutes, 59.99 seconds.

x The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

x An ongoing elapsed time measurement operation will

continue internally even if you change to another mode.

However, if you exit the Stopwatch Mode while a split

time is displayed, the split time will not be displayed

when you return to the Stopwatch Mode.

x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page EN-8).

1/100 second

Hours

Minutes

Seconds

EN-23

To specify a date

1. In the Moon/Tide Data Mode, hold down A until the

year setting starts to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select the other settings.

CCC

Year DayMonth

3. While a setting is flashing, use B (–) or D (+) to change it.

x You can specify a date in the range of January 1, 2000 to December 31, 2099.

4. Press A to exit the setting screen.

5. Use A to display either the tide data screen or the Moon data screen.

Month – Day

Year

EN-22

Tide Data Screen Moon Data Screen

Year

Month – Day

Moon age

Year

Month – Day

Tide graph

Time

Moon phase indicator

x While the tide data screen is displayed, press D to advance to the next hour.

x While the Moon data screen is displayed, press D to advance to the next day.

x You can also specify a particular date (year, month, day) to view its tide data and

Moon data. See “To specify a date” for more information.

x When you enter the Moon/Tide Data Mode, the screen (tide data or Moon data)

that was displayed the last time you exited the mode appears first.

EN-21

To view the current Moon/Tide Data Mode data

In the Moon/Tide Data Mode, press A to toggle between the tide data screen and

the Moon data screen.

x The tide graph shows the tide for the currently displayed time. The initial tide data

screen shows the level for 6:00 a.m. The Moon data screen shows the Moon age

and Moon phase for the current date.

x If you are using 12-hour timekeeping, P (p.m.) or A (a.m.) will be indicated for the

times on tide data screens.

EN-20

Moon/Tide Data

Moon/tide data lets you view the Moon age and Moon

phase for a particular date, and tidal movements for a

particular date and time at your Home Site.

x If you suspect that the current Moon/tide data is wrong

for some reason, check the current Timekeeping Mode

settings (time, date, and Home Site), and correct them

if required.

x See “Moon Phase Indicator” (page EN-42) for information

about the Moon phase indicator and “Tide Graph” (page

EN-44) for information about the tide graph.

x All of the operations in this section are performed in the

Moon/Tide Data Mode, which you enter by pressing C

(page EN-8).

x If you do not perform any operation for about two to

three minutes while in the Moon/Tide Data Mode, the

watch automatically returns to the Timekeeping Mode.

Tide Data Screen

Tide graph

Moon phase indicator

Year

Time

Month – Day

Download manual in English (PDF, 0.51 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Casio WS-1700H-1AVEF Watch by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Casio WS-1700H-1AVEF Watch?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Casio WS-1700H-1AVEF Watch. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Casio WS-1700H-1AVEF Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio WS-1700H-1AVEF Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Casio
Model	WS-1700H-1AVEF
Category	Watches
File type	PDF
File size	0.51 MB

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio WS-1700H-1AVEF Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

A battery in my device is oxidized, can I still safely use it? Verified

Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (942) Read more

My mechanical watch runs fast, what can I do? Verified

This might be caused by exposure to a magnetic field. It can be solved by a demagnetisation process performed by a professional watchmaker.

This was helpful (880) Read more

What do AM and PM stand for? Verified

AM stands for Ante Meridiem and indicates that the time is before midday. PM stands for Post Meridiem and indicates that the time is past midday.

This was helpful (756) Read more

What is a 'Chronograph'? Verified

A 'Chronograph' is literally a 'writer of time'. The term is used to describe clocks and watches that tell the time of day as well as measure a certain period of time, like a stopwatch.

This was helpful (660) Read more

What is GMT? Verified

GMT stands for Greenwich Mean Time (sometimes called UTC, standing for Coordinated Universal Time). It is the time for the longitude 0, that passes through Greenwich near London.

This was helpful (501) Read more

What is a quartz movement? Verified

Watches and clocks with a quartz movement are driven by a battery. This sends an electric current through quartz crystals that will vibrate. These vibrations are passed on to the movement. Because the vibrations have a fixed frequency, watches and clocks with a quartz movement are extremely precise.

This was helpful (483) Read more

There is moisture on the inside of the glass of my Casio watch, what should I do? Verified

Casio states that if the moisture appeared after an extreme change in temperature and disappears relatively quickly afterwards, there is probably nothing wrong. If the moisture does not disappear, you should have your watch repaired as soon as possible.

This was helpful (62) Read more