Manual Bosch TDA7630GB Iron

Manual

009 TDA76..GB /09/12

Customer Service

Great Britain

Bosch Customer Service

Grand Union House

Old Wolverton Road

Milton Keynes

MK12 5PT

UK +44 (0)844 892 8923

IRL +353 (0)1450 2655

www.bosch-home.co.uk

Operating instructions

Solving Minor Problems Yourself

Problem Possible Causes Solution

Iron does

not work

or is not

heating up.

Temperature control (I) set to

minimum.

Turn the temperature control

to the desired position.

Connection problems. Check that the plug is

inserted into the mains

socket correctly.

The automatic shut-off system

has been activated (*).

Move the iron gently from

side to side to re-start it.

Iron is not

steaming.

There is no water in the tank (E). Fill the water tank.

The steam regulator (C) is in the

position.

Set the steam regulator to

the relevant position.

Water is

dripping

from the

holes in the

soleplate.

Temperature control (I) setting

is too low.

Set the temperature control

within the steam area

(between the “••” and

“max”) or turn the steam

regulator (C) to .

Steam regulator (C) is set too

high in conjunction with a low

temperature.

Turn the steam regulator to

a lower setting.

You have pressed the shot of

steam button (A) repeatedly

without waiting for 5 seconds

between each press.

Wait 5 seconds between

each press of the jet of

steam button.

Water has been left in the tank

when the sole plate was cold,

with the steam regulator (C) set

at or .

Always empty the tank after

ironing and set the steam

regulator to after ironing

and when filling the tank.

Distilled water has not been

used (see “Filling the water

tank” section) or other products

such as fragrant water have

been added to the tank.

Mix distilled water with

tap water as directed in

the “Filling the water tank”

section and never add any

other products to the water

tank.

Spray does

not work.

No water in the tank. Add water to the water

tank.

Obstructed mechanism. Contact an Authorised

Technical Service Centre.

The iron

begins to

smoke when

switched on.

During first use: Certain

components on the appliance

have been lightly greased at the

factory and may produce a little

smoke when initially heated.

This is completely normal

and will stop after a short

while.

Deposits

come out

through the

holes in the

soleplate.

Traces of lime scale are coming

out of the steam chamber.

Carry out a cleaning cycle

(see Self Cleaning section).

Flashing

lamp on top

of handle.

Auto-shut off has been

activated.

Move the iron gently from

side to side to re-start it. The

lamp will then flash once

before it re-heats.

Thank you for buying the TDA76 steam iron from Bosch. These

instructions contain valuable information about the unique features

of this iron and some hints to make ironing easier for you.

Please visit www.bosch-home.co.uk for more product

information or to register your product, just follow the

link to the Online guarantee registration.

Important

This appliance has been designed exclusively for domestic

use and must not be used for industrial purposes.

Carefully read through the operating instructions for the

appliance and safeguard them for future reference.

General safety instructions

• The iron must not be left unattended while it is

connected to the supply mains.

• Remove the plug from the socket before filling the

appliance with water or before pouring out the

remaining water after use.

• The appliance must be used and placed on a stable

surface.

• When placed on its stand, make sure that the surface

on which the stand is placed is stable.

• The iron should not be used if it has been dropped,

if there are visible signs of damage or if it is leaking

water. It must be checked by an authorized Technical

Service Centre before it can be used again.

• With the aim of avoiding dangerous situations, any

work or repair that the appliance may need, e.g.

replacing a faulty mains cable, must only be carried

out by qualified personnel from an Authorised

Technical Service Centre.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without

supervision.

• Keep the iron and its cord out of reach of children less

than 8 years of age when it is energized or cooling

down.

• CAUTION. Hot surface.

Surface is liable to get hot during use.

(*) Model dependent.

You can download this manual from the local homepages of Bosch

• This appliance is to be connected and used in accordance with

the information stated on its characteristics plate.

• This appliance must be connected to an earthed socket. If it is

absolutely necessary to use an extension cable, make sure that

it is suitable for 16A and has a socket with an earth connection.

• If the safety fuse fitted in the appliance blows, the appliance

will be rendered inoperative. To restore normal operation the

appliance will have to be taken to an authorised Technical

Service Centre.

• In order to avoid that, under unfavourable mains conditions,

phenomena like transient voltage drops or lighting fluctuations

can happen, it is recommended that the iron is connected to a

power supply system with a maximum impedance of 0.27Ω . If

necessary, the user can ask the public power supply company

for the system impedance at the interface point.

• Unplug the appliance from the mains supply after each use, or

if a fault is suspected.

• The electrical plug must not be removed from the socket by

pulling the cable.

• Never immerse the iron in water or any other fluid.

• Do not leave the appliance exposed to weather conditions (rain,

sun, frost, etc.).

Tips to help you save energy

Steam production consumes the most energy. To help minimise

the energy used, follow the advice below:

• Start by ironing the fabrics that require the lowest ironing

temperature.

• Regulate the steam according to the selected ironing

temperature.

• Only use steam if necessary. If possible, use the spray function

instead.

• Try to Iron the fabrics while they are still damp and reduce the

steam setting. Steam will be generated from the fabrics rather

than the iron. If you tumble dry your fabrics before ironing them,

set the tumble drier to the ‘iron dry’ programme.

• If the fabrics are damp enough, turn off the steam regulator

completely.

• Stand the iron upright during pauses. Resting it horizontally

with the steam regulator on generates wasted steam.

Environmental Care

This iron has been designed according to ecological criteria,

related to the sustainable development, analyzing its whole

lifecycle - from material selection to its later reusing or recycling

- evaluating the improvement possibilities, from a technical,

economical and environmental point of view.

Before throwing a used appliance away, you should make it

noticeably inoperable e.g. cut off the mains lead and be certain

to dispose of it in accordance with current laws and regulations.

Your retailer, town council or local council can give you detailed

information about these.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning

used electrical and electronic appliances

(waste electrical and electronic equipment -

WEEE).

The guideline determines the framework for

the return and recycling of used appliances as applicable

throughout the EU.

GUARANTEE TERMS

The terms of the guarantee for this appliance are in accordance

with that stated by our representative for the country in which

it is sold. Details of those conditions can be obtained from the

retailer from whom the appliance was purchased. The SALES

RECEIPT must be presented when making any claims against the

terms of this guarantee. We reserve the right to make technical

modifications.

Before using the Iron for the first time

Please carry out the following steps:

1. Remove the protective cover from the soleplate before using

the iron.

2. While the iron is unplugged, fill the water tank (E) with tap water

3. Plug the appliance into the mains and set the temperature

control (I) to the “max” position by lining it up with the pointer

(H) on the iron.

4. When the iron has reached the correct temperature, the pilot

light (K) goes out. Set the steam regulator (C) to the maximum

position.

5. Hold the iron horizontally and repeatedly press the shot of steam

button (A). Any residue should come out of the soleplate (F).

It may smoke and smell – this is normal and will cease after a

short while.

6. If necessary, carefully clean the soleplate down with a dry,

folded cloth.

TDA 76..

sensixx B7

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Bosch TDA7630GB Iron. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bosch. They might be able to provide an original manual. Are you looking for the manual of your Bosch TDA7630GB Iron in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Bosch Irons
More manuals of Irons

Frequently Asked Questions about Bosch TDA7630GB Iron

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.