Manual Big Agnes Rattlesnak SL3 mtnGLO Tent

Need a manual for your Big Agnes Rattlesnak SL3 mtnGLO Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

Cut here to remove. Do Not Tear!
RATTLESNAKE SL mtnGLO
TM
SET UP INSTRUCTIONS
1. Remove contents from stu sack. Spread the tent body out at on the ground
2. Stake out the four corners of the tent body.
3. Assemble the two poles: One main pole with two hubs and one short straight cross-
over pole. To ensure each pole section is fully seated insert each pole section into
the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled pole set on top of the tent body. SL1 & SL2: Align the nar-
rower end of the main pole set with the silver webbing at the end of the tent and
the wider end of the pole set with the green webbing at the head end of the tent.
SL3 & SL4: the main pole has equal length pole sections so the pole tips may be
inserted at either end.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. Place the crossover pole across the top of the ridge pole. Clip the ends of the cross-
over pole into the clear plastic Ball Cap clips that are located above the doors on the
tent body.
8. Drape the rainy over the tent body aligning the silver and green webbing of the
tent body to the silver and green webbing of the y. Note: There are SQ rings on the
underside of the rainy above both doors that are used in the Fast Fly set up.
9. Make sure the webbing at the corners of the rainy is completely slackened. Attach
the buckles of the rainy to those on the tent body.
10. Stake out the vestibules.
11. Evenly tension the webbing on each corner as needed to keep the rainy taut.
12. Stake out all guylines.
Separate 6”, large diameter pole segment included for emergency
eld repair. Slide repair pole over the break to act as a splint.
FAST FLY SET UP INSTRUCTIONS
If you purchase the optional Big Agnes footprint for your Rattlesnake SL tent, it will en-
able you to pitch a shelter while leaving the tent body behind. The Fast Fly conguration
requires the footprint, rainy, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. Assemble the two poles: One main pole with two hubs and one short straight cross-
over pole. To ensure each pole section is fully seated insert each pole section into
the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled pole set on top of the tent body. SL1 & SL2: Align the nar-
rower end of the main pole set with the silver webbing at the end of the footprint
and the wider end of the pole set with the green webbing at the head end of the
footprint. SL3 & SL4: the main pole has equal length pole sections so the pole tips
may be inserted at either end.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. Drape the rainy over the pole structure, aligning the silver and green webbing of
the y with the silver and green webbing of the footprint.
6. Climb in and place the crossover pole across the middle of the ridge pole, inserting
the tips into the SQ rings located on the underside of the y.
7. Make sure the webbing at the corners of the rainy is completely slackened. Attach
the buckles of the rainy to those on the tent body.
8. Evenly tension the webbing on each corner as needed to keep the rainy taut.
9. Stake out all guylines.
Ball Cap
Hardware:
Rattlesnake SL1 mtnGLO
TM
Tent Body and Fly
Rattlesnake SL3 mtnGLO
TM
Tent Body and Fly
Rattlesnake SL2 mtnGLO
TM
Tent Body and Fly
Rattlesnake SL4 mtnGLO
TM
Tent Body and Fly
The mtnGLO™ tent light technology by Big Agnes
lets you light up the backcountry
How to use it:
1. Take the mtnGLO™ logo controller out of the pocket. Insert 3 AAA batteries in the
controller (batteries not included)
2. Put the controller back in the pocket and connect to the tent light USB
3. Push the button on the controller - one click is for full power, second click will
adjust the light to 50% power and the third click will turn it o.
4. Always disconnect the controller before packing your tent to save battery life
Ball Cap AssemblySQ Ring
Download manual in English (PDF, 0.46 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Big Agnes Rattlesnak SL3 mtnGLO Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Big Agnes Rattlesnak SL3 mtnGLO Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Big Agnes Rattlesnak SL3 mtnGLO Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Big Agnes Rattlesnak SL3 mtnGLO Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Big Agnes. They might be able to provide an original manual. Are you looking for the manual of your Big Agnes Rattlesnak SL3 mtnGLO Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Big Agnes
Model Rattlesnak SL3 mtnGLO
Category Tents
File type PDF
File size 0.46 MB

All manuals for Big Agnes Tents
More manuals of Tents

Frequently Asked Questions about Big Agnes Rattlesnak SL3 mtnGLO Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more
Manual Big Agnes Rattlesnak SL3 mtnGLO Tent

Related products

Related categories