Home > Household appliances > Ranges > Bertazzoni Ranges > Bertazzoni PRO905GGVLXE Range

Manual Bertazzoni PRO905GGVLXE Range

Need a manual for your Bertazzoni PRO905GGVLXE Range? Below you can view and download the PDF manual for free in English. This product currently has 8 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Table 2 (model with gas oven and gas grill with double controls)

Oven

Natural G20

130

314

3,30

2838

Butane G30

240

3,30

2838

Propane G31

236

3,30

2838

Grill

Natural G20

108

191

1720

Butane G30

145

1720

Propane G31

143

1720

Table 3 (model with gas oven and gas grill with single control, or gas oven and electric grill)

Oven

Natural G20

155

429

4,50

3870

Butane G30

105

327

4,50

3870

Propane G31

105

321

4,50

3870

Grill

Natural G20

108

191

1720

Butane G30

145

1720

Propane G31

143

1720

BURNER ADJUSTMENT

1) Burner "MINIMUM" adjustment:

Work surface burner adjustment: follow the instructions below to adjust the work surface burner minimum:

1) Light the burner and set the knob to the MINIMUM position (small flame).

2) Remove the knob of the valve that is press fit on the rod of that valve.

3) If the cooker is not equipped with safety valves on the surface burners, insert a small slotted screwdriver into the hole on the

valve rod (Fig. 8) and turn the choke screw to the right or left until the burner flame is adjusted to minimum. If the cooker is

equipped with safety valves, the choke valve is not located in the rod hole, but on the valve body (see fig. 9).

4)For the gas valve of dual burner the choke valve is located on the valve body (fig.10), the A screw adjust the outer ring,

the B screw adjust the inner ring.

5) Make sure that the flame does not go out when switching quickly from the MAXIMUM to the MINIMUM position.

Oven burner adjustment: follow the instructions below to adjust the minimum:

1) Light the burner setting the knob to the MAXIMUM position.

2) Close the oven door and operate the oven for at least 10 minutes.

3) Set the knob to the MINIMUM position (corresponding to 120°) and then remove it.

4) With a slotted screwdriver turn the choking screw (see figure 11) and, while observing the flame at the same time through the

cooker porthole, evaluate the consistency of the flame so it remains on when switching quickly from the MINIMUM to the

MAXIMUM position.

Grill burner adjustment: follow the instructions below to adjust the minimum:

1) Light the burner setting the knob to the MAXIMUM position.

2) Close the oven door and operate the oven for at least 10 minutes.

3) Set the knob to the MINIMUM position (small flame) and then remove it.

4) If the cooker is not equipped with safety valves on the surface burners, insert a small slotted screwdriver into the hole on the

valve rod (Fig. 8) and turn the choke screw to the right or left, while observing the flame at the same time through the cooker

porthole, evaluate the consistency of the flame so it remains on when switching quickly from the MINIMUM to the MAXIMUM

position. If the cooker is equipped with safety valves, the choke valve is not located in the rod hole, but on the valve body (see

figure 9).

WARNING: The above-mentioned adjustment should be made only with natural gas burners, while for those operating

with liquid gas the screw must be locked at the end in a clockwise direction.

WARNING: For the model with single control for grill and oven, the grill burner always operates at maximum and

therefore no minimum adjustment is required.

APPLIANCE ELECTRIC CONNECTION:

The electric connection must comply with the current legal standards and regulations.

Before making the connection, check that:

- The system electrical rating and the current outlets are adequate for the maximum power output of the appliance (see the label

applied to the bottom of the casing).

- The outlet or the system is equipped with an efficient ground connection in accordance with the current legal standards and

regulations. The company will not be responsible for the non-compliance with these instructions.

When the connection to the power supply network is made using an outlet:

- If the power cord is supplied without a plug, apply a standard plug that is suitable for the load indicated on the label. Connect

the wires according to the diagram shown in Fig.12 and check that:

letter L (phase) = brown wire;

letter N (neutral) = blue wire;

ground symbol = green-yellow wire;

- The power cord must be positioned so that an overtemperature of 75 K will not be reached at any point.

- Do not use reductions, adapters or splitters since they might cause false contacts and lead to dangerous overheating.

When the connection is made directly to the electric network:

- Insert an omnipolar circuit-breaker between the appliance and the network which is sized for the appliance load with a

minimum opening between the contacts of 3 mm.

- Remember that the ground wire must not be interrupted by the circuit-breaker.

- As an alternative, the electric connection can also be protected by a high-sensitivity residual current circuit-breaker.

- It is highly recommended to attach the special green-yellow ground wire to an efficient ground system.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service

agent.

Rating

Let us know what you think about the Bertazzoni PRO905GGVLXE Range by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Bertazzoni PRO905GGVLXE Range?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Bertazzoni PRO905GGVLXE Range. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Bertazzoni PRO905GGVLXE Range. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bertazzoni. They might be able to provide an original manual. Are you looking for the manual of your Bertazzoni PRO905GGVLXE Range in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Bertazzoni
Model	PRO905GGVLXE
Category	Ranges
File type	PDF
File size	2.77 MB

All manuals for Bertazzoni Ranges
More manuals of Ranges

Frequently Asked Questions about Bertazzoni PRO905GGVLXE Range

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Why does the ignition on my range make a clicking sound? Verified

If the range has ben cleaned with a lot of water, the knobs might have gotten wet, triggering the ignition. Let the knobs dry. If the problem persists you should contact the manufacturer.

This was helpful (1087) Read more

The oven in my range does not get warm enough, what should I do? Verified

The thermostat makes sure the ovens heats up to the designated temperature. It is likely that the thermostat is defective. Have it replaced. When in doubt, contact the manufacturer.

This was helpful (1052) Read more

Which pans can be used on an induction range? Verified

In general all pans that are magnetic can be used on an induction range. Almost all new pans are suited for induction.

This was helpful (861) Read more

My range has a power plug that doesn't fit a regular socket, what should I do? Verified

Many electric ranges (both ceramic and induction) have a different plug. This is because these appliances require a lot of power. Have the installation of the appliance done by a professional.

This was helpful (463) Read more

What is pyrolysis? Verified

Some ovens are equipped with a pyrolysis function. This is a cleaning system that burns dirt and fat in the oven by using very high temperatures. After pyrolysis, all the dirt will have turned to ash and can be easily removed. If the oven has a pyrolysis function, it is advisable to use it 3 to 4 times a year to keep the oven clean.

This was helpful (403) Read more

Can I connect a range to an extension cord? Verified

Appliances that require large amounts of power, like a range, can not be connected to all extension cords. See what the power usage of the range is, which is indicated in Watt, and check if the extension cord can handle this. There are extension cords with thicker cables that are made to handle larger appliances.

This was helpful (207) Read more

Can I prepare several items simultaneously by using more grill trays? Verified

Technically this is possible. However, it depends on the type of food if you need to adjust the preparation time or swap the trays halfway during the preparation.

This was helpful (191) Read more

When I use the oven there often food remains that fall on the bottom, causing smoke. How can I prevent this? Verified

Many ovens come with both a grid and a baking tray. When food is prepared on the grid, the baking tray can be placed on the bottom to prevent food remains from burning and causing smoke.

This was helpful (189) Read more