Manual Bauknecht WMC 6L55 Dryer
Need a manual for your Bauknecht WMC 6L55 Dryer? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
5019 400 00323
Bauknecht is a registered trademark of Whirlpool USA
Load the laundry, close the door and add detergent as indicated
on the front page and as described in the chapter “Detergent and
Additives” in your Instructions for Use. Turn the programme
selector to the desired programme and temperature. The
display shows the programme duration, and the predefined spin
speed lights up. The “Start/Pause” indicator blinks.
The washing machine is designed to save energy, therefore, if
you have selected a programme but do not start it within about
a quarter of an hour, it will switch off automatically. To switch it
on again, turn the programme selector to “Off/O” and then to the
desired programme again..
Push the button of any option desired - the indicator lights up.
If the combination programme/option or option/option is not
possible, the indicator switches off automatically.
“Cold wash” button
• Saves energy used for water heating while maintaining a
good wash result.
• Recommendable for lightly soiled laundry without stains.
• Make sure that your detergent is suitable for cold wash
temperatures (15 or 20 °C).
“Rapid” button
• Enables quicker washing by shortening the programme
duration.
• Recommendable for only lightly soiled laundry.
“Clean +” button
• Choose this option if you use an in-wash additive for stain
removal (powder, for example “Vanish”) - it will optimize the
additive’s efficiency to get better wash performance and
stain removal.
• Use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• May prolong the programme by up to 15 minutes.
Appropriate for use of stain removers and bleaches on oxygen
basis. Chlorine or perborate bleaches must not be used!
“Prewash” button
• Adds a prewash cycle to the wash programme selected;
prolongs the programme by about a quarter of an hour.
• Recommended for heavily soiled laundry (e.g. with sand or
granular dirt).
• Do not use liquid detergent for the main wash when
selecting “Prewash”.
CONSUMPTION DATA
Power consumption: in off-mode 0.16 W / in left-on mode 0.16 W.
Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approximate programme duration
(hrs.min)
without “Rapid” with “Rapid”
Cotton 95 6.0 74** 2.20
2:40 —
Cotton 60 6.0 50 1.10
2:20 1:45
Cotton 40 6.0 64 0.70
2:05 1:15
Jeans 40 4.0 53 0.46 1:30 1:10
Synthetics 60 3.0 48** 0.94 1:37 1:12
Synthetics 40 3.0 42 0.40 1:20 0:55
Delicates 40 1.5 60 0.65
0:50 —
Delicates 30 1.5 60 0.40
0:46 —
Daily load 40 4.0 46 0.40
1:00 —
Quick wash 30 3.0 48 0.25
0:30 —
Wool/Handwash 40 1.0 45 0.55 0:40 —
*
60 6.0 41 0.85 4:00 —
*
60 3.0 30 0.58 3:00*** —
*
40 3.0 30 0.56 3:00*** —
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual
water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.
15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water
supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.
Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options
or changing the spin speed will also change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
*** Automatic adaptation of programme duration after detection of wash load.
60°
Cotton
60°
Cotton
40°
Cotton
* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle
temperature.
LOAD LAUNDRY, ADD DETERGENT AND
SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• Particularly suitable for areas with very soft water, washing
baby linen and helping people with allergies.
“Easy ironing” button
• Reduces creasing by an increased water quantity and a very
gentle spin.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• Particularly useful if you want to postpone spinning to a later
time, or if you want to drain only.
• The programme stops to “Rinse hold” at the time the “Rinse
hold” indicator in the programme flow bar is on. The “Start/
Pause” indicator blinks.
Terminate the “Rinse hold” option :
• Press the “Start/Pause” button ; the programme will
terminate automatically with the final spin cycle for the
present wash programme.
• If you do not wish to spin the clothes, turn the programme
selector to the “Drain” programme and press the “Start/
Pause” button to start draining.
“Spin” button
• Every programme has a predefined spin speed; press the
button if you want to set a different spin speed.
• If spin speed “0” is selected, the final spinning is cancelled
and the water is drained out only. However, intermediate
spin phases remain during rinse.
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when electricity is
cheaper. Do not use liquid detergent when activating “Start
delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select a delay time up to
24 hours.
• Press the “Start/Pause” button .
On the display, the start delay symbol and the dot between hours
and minutes blink. The countdown of the delay time begins.
• The delay time disappears when the programme starts and it
is replaced by the remaining programme duration.
• Once having pressed the “Start/Pause” button , the
delay time can be changed by pressing again the “Start
delay” button.
To cancel the “Start delay”
...before you press the “Start/Pause” button :
• Turn the programme selector to another position or press
the “Reset” button .
...after having pressed the “Start/Pause” button :
• Press the “Start/Pause” button - the selected start
delay disappears from the display.
Open the water tap and press the “Start/Pause” button .
The “Start/Pause” indicator lights up. The programme flow bar
shows the current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
When the laundry load is detected or the programme duration is
updated, an animation appears on the display.
Before starting and after end of a programme, the indicator lights to
show that the door can be opened. As long as a wash programme is
running, the door remains locked and must on no account be forced
open. In case you have an urgent need to open it during a running
programme, refer to “Reset a running programme”.
If one of the failure indicators blinks, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Water tap closed”: no or not sufficient inlet water.
“Service”: failure or malfunction of an electrical component.
“Clean pump”: waste water is not pumped out.
Spin speed blinks: unbalance during spinning.
• The “Door open” indicator lights up, and the display
shows “End”. After about a quarter of an hour, the washing
machine will switch off completely to save energy.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the “Start/Pause” button to pause the
programme. The indicator blinks.
2. Select the new programme and, if you want, another spin
speed and any options.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
The “Reset” button cancels a programme before the end.
• Press and hold the “Reset” button for a few seconds.
The water is drained. It may last some time until the door
can be opened.
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATOR
FAILURE INDICATORS
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME
- the sensor technology adapts drum movement, water, energy and programme duration to your wash load.
Loading…
Rating
Let us know what you think about the Bauknecht WMC 6L55 Dryer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your Bauknecht WMC 6L55 Dryer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bauknecht. They might be able to provide an original manual. Are you looking for the manual of your Bauknecht WMC 6L55 Dryer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | Bauknecht |
| Model | WMC 6L55 |
| Category | Dryers |
| File type | |
| File size | 1.83 MB |
All manuals for Bauknecht Dryers
More manuals of Dryers
Frequently Asked Questions about Bauknecht WMC 6L55 Dryer
Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.
Why is de drum of my dryer larger than that of my washing machine, even though they have the same capacity? Verified
To properly dry laundry, a dryer needs to have air. This needs space and that's why the drum needs to be larger.
This was helpful (2994) Read moreWhat is the difference between a condenser dryer and a vented dryer? Verified
In a condenser dryer the condensed water vapour is drained and collected in an internal reservoir. In a vented dryer the hot, moist air is drained through a hose, for example out of a window. A vented dryer is cheaper to use than a condenser dryer
This was helpful (857) Read moreCan I stack my dryer and washing machine? Verified
In general it is possible to directly stack a dryer and washing machine directly on top of each other. This only works with front loading models. However, it is advisable to use a fitting accessory to do so. This will prevent the machines from vibrating and falling off and also prevents damage to the bottom machine.
This was helpful (690) Read moreCan I connect a dryer to an extension cord? Verified
Appliances that require large amounts of power, like a dryer, can not be connected to all extension cords. See what the power usage of the dryer is, which is indicated in Watt, and check if the extension cord can handle this. There are extension cords with thicker cables that are made to handle larger appliances.
This was helpful (534) Read moreWhat is the difference in usage between a washer-dryer and a separate washing machine and dryer? Verified
The biggest advantage of a washer-dryer is that it takes less space. However, a separate dryer will be able to dry more than a washer-dryer. A washer-dryer also uses relatively more energy and requires more time.
This was helpful (523) Read more
Join the conversation about this product
Here you can share what you think about the Bauknecht WMC 6L55 Dryer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.