Home > Household appliances > Cooker Hoods > ALNO Cooker Hoods > ALNO ADU 3040 S Cooker Hood

Manual ALNO ADU 3040 S Cooker Hood

Need a manual for your ALNO ADU 3040 S Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Part 1

1 - INSTALLATION

INSTRUCTIONS

This canopy hood is designed to be fixed to

any rigid vertical surface, above a gas or

electric hotplate, and can be used either in the

extraction (ducted to the outside) or in the

recirculation mode (internal recycling).

Before commencing the installation,

conside-ration should be given to the

difficulties to be found during the

installation and to the bulky weight of the

hood. The installation work must be

undertaken by a qualified and competent

person. The manufacturer dis-claims all

liability for any damage or injury caused

as a result of not following the instruc-tions

for installation contained in the follo-wing

text.

2 - COMPONENTS

The cooker hood is made up of the following

components (fig. 1):

2.1 - n. 1 canopy item C including controls,

worktop illumination and fan unit

2.2 - n.1 telescopic chimney stack formed by:

n. 1 U-shaped upper section item S

n. 1 U-shaped lower section item I

2.3 - n. 1 evacuation spigot 90x132 item A

2.4 - n. 1 fixing kit including:

n. 2 wall brackets item 1 to fix the canopy

hood

n. 2 wall brackets item 2 to fix the chimney,

screws, rawl plugs, documentation

2.5 - n.1 splashback item F (optional)

3 - SAFETY WARNINGS

3.1 - When used in the extraction mode cooker

hood ducting must not be connected to a

flue which is used for exhausting fumes

from appliances supplied with energy other

than electric such as a central heating flue

or water heating flue.

3.2 - Before connecting to the mains supply

ensure that the mains voltage corresponds

with the voltage on the rating plate inside

the cooker hood.

3.3 - Connect the cooker hood to the mains via

a double pole switch which has 3 mm

clearance between the contacts.

3.4 - This appliance must be earthed.

3.5 - When installed, the hood must be positioned

at least 65 cm above a cooking appliance.

3.6 - Never do flambé cooking under this cooker

hood.

3.7 - Never leave frying pans unattended during

use as overheated fats and oils may catch

fire.

3.8 - Before carrying out any kind of cleaning

or maintenance, disconnect the hood from

the mains supply.

3.9 - If the room where the hood is to be used

contains a fuel burning appliance such as a

central heating boiler then this must be of

the room sealed or balanced flue type. If

other types of flue or appliance are fitted

ensure that there is an adequate supply of

air into the room. When the coooker hood

is used in conjunction with other appliances

supplied with energy other than electricity,

the negative pressure in the room must not

exceed 0,04 mbar to prevent fumes been

drawn back into the room by the cooker

hood.

4 - INSTALLATION

The cooker hood may be fixed using one of

three methods:

A - installation of the cooker hood with splashback

(optional);

B - installation of the cooker hood without

splashback;

C - installation of the cooker hood aligning the

top of the chimney with the top of the

adjoining wall cabinets.

For easy installation proceed as follows:

4.1 - Fix the wall brackets

4.2 - Fix the canopy hood

4.3 - Connect the hood to the mains supply and

ensure that it works properly

4.4 - Set the hood for recirculation or evacuation

4.5 - Fix the telescopic chimney stack.

4.1 - Fixing the wall brackets

Installation type A/B (fig. 2a-b)

1 - Draw a vertical line on the wall, from the

centre of the cooking appliance up to the

ceiling, using a marking pen. This is to ensure

the correct vertical alignment of the wall fixing

brackets.

2 - Fixing the wall brackets item 1

Draw a horizontal line on the wall ensuring

that the distance from the cooktop is as

follows:

a - If the splashback is to be installed as

illustrated in fig. 2a, the height for the

fixing brackets (d) is 122 mm plus the

height of the splashback above the

hotplate. The distance to be allowed

between the wall brackets and hotplate is

determined by the physical height of the

splashback.

b - If the splashback is not to be fitted draw

Rating

Let us know what you think about the ALNO ADU 3040 S Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the ALNO ADU 3040 S Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the ALNO ADU 3040 S Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your ALNO ADU 3040 S Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact ALNO. They might be able to provide an original manual. Are you looking for the manual of your ALNO ADU 3040 S Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	ALNO
Model	ADU 3040 S
Category	Cooker Hoods
File type	PDF
File size	0.93 MB

All manuals for ALNO Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about ALNO ADU 3040 S Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1213) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (635) Read more