Home > Camping & Outdoor > Tents > Zempire Tents > Zempire Aerodome II Tent

Manual Zempire Aerodome II Tent

Need a manual for your Zempire Aerodome II Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTRUCTIONS

12. It is recommended that guy ropes are

pegged out at all times and windows are

opened whenever possible to allow

adequate ventilation.

Insert pegs at a 45

angle

3. Unzip the triangle Valve Cover

on the Left hand side of the tent

and locate the AERO-FRAME

valves.

1. Clear your site making sure there are no sharp

objects where you are going to pitch your tent. Try

to get a site that is as ﬂat as possible. Spread tent

out, the PVC windows are located at the front.

2. Peg out the 4 peg points on the main body of the

tent as shown.

4. Remove the valves completely and re-screw in to ensure the valve is not

cross-threaded. Screw in ﬁrmly but do not over tighten. Open the valve caps.

5. The Pump features a double hose adapter

which allows two tubes to be inﬂated at the

same time.

Ensure the pump is conﬁgured as per the

following diagram.

Attach the of the hoses to the AERO-FRAME

valve inlets.

6. Begin to inﬂate the centre and left hand side AERO-FRAME.

Have someone walk inside to help raise the frame during

inﬂation. Inﬂate to 7 PSI.

DO NOT INFLATE ABOVE 8PSI. THIS MAY CAUSE DAMAGE

TO THE POLES AND THE TENT.

7. Once inﬂated to the correct pressure, remove the pump hoses and securely attach

the valve caps. Close theValve Cover.

8. Inﬂate the front awning and the

Right Hand Side Room

AERO-FRAME following the same

procedure as above, then remove

the hose and securely attach the

valve caps.

9. Peg out the remaining peg points around

the tent ensuring that the ﬂoor sits ﬂat. It is

easier to align the front door correctly with

the door closed.

10. Peg out the front and rear anchor

webbings. These should sit at a 45

angle to

the ground.

DEFLATION

1. Remove the valves from the AERO-FRAME. Take care as poles will be under

pressure.

2. It may be necessary to remove some excess air from the AERO- FRAME

before rolling up your tent. This can be done by carefully walking down the

length of the tube towards the valve end.

PSI

INFLATE

DEFLATE

DOUBLE ADAPTER

PRESSURE GAUGE

PRESSURE RELEASE VALVE

Valve Cover

Peg

points

PSI

Front Inflation Valve

Peg

points

Rear

Anchor

Webbings

Front

Anchor

Webbings

FRONT

Valve Cover

Draft Vents

11. Peg out the 4 draft vents on either side

of the bedrooms. These can be pegged

closed during cooler weather conditions.

Rating

Let us know what you think about the Zempire Aerodome II Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Zempire Aerodome II Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Zempire Aerodome II Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Zempire Aerodome II Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Zempire. They might be able to provide an original manual. Are you looking for the manual of your Zempire Aerodome II Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Zempire
Model	Aerodome II
Category	Tents
File type	PDF
File size	0.95 MB

All manuals for Zempire Tents
More manuals of Tents

Frequently Asked Questions about Zempire Aerodome II Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more