Home > Camping & Outdoor > Tents > Wechsel Tents > Wechsel Outpost 3 Tent

Manual Wechsel Outpost 3 Tent

Need a manual for your Wechsel Outpost 3 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

Lieferumfang
Contents
1x flysheet (FS)
1x inner tent (IT)
3x tent poles—colour coded
1x set of tent pegs
1x repair tube for tent poles
2x pack bag, 1x pole bag, 1x bag for tent pegs,
Guy lines and fasteners—attached the tent
Additionally for all Zero-G Line tents:
1x seam sealer
en
Vor dem Abbau des Zeltes bitte die Reißverschlüsse und
APEX-Lüfter schließen!
Bei diesem Tunnelzelt haben Sie auch die Möglichkeit, das
Innenzelt eingehängt zu lassen und so beim nächsten Mal
das Zelt komplett aufzubauen. Zunächst evtl. die Sturm-
abspannungen lösen und die Heringe herausziehen. Jetzt
können die Gestänge entspannen werden. Bitte entlasten
Sie die Ösen der Gurtbänder und ziehen die Endstücke
möglichst gerade heraus. Schieben Sie die Stangen aus
den Kanälen heraus. Beim Ziehen der Stangen kann es
passieren, dass die Segmente auseinander klappen. Klap-
pen Sie die Gestänge möglichst von der Mitte aus zusam-
men, um den Gummi gleichmäßig zu spannen. Lassen Sie
die Segmente nicht aufeinander schnappen, da kleine
Kerben die Segmente beschädigen/schwächen könnten.
Verpacken des Zeltes
Wenn Sie das Gestänge und die Heringe verpackt haben
und AZ u. IZ zusammengelegt sind, legen Sie das Gestän-
ge und die Heringe darauf und rollen alles zusammen.
Klemmen Sie sich das Zelt zwischen die Beine und stecken
es mit leichter Drehung in den Packsack.
Zeltabbau
en
Dismantling the tent
Close the zips and the APEX vents before taking down the
tent!
You have the option with this tunnel tent to leave the inner
tent clipped inside the fly, which will enable you to set up
the entire tent together the next time.
Loosen the guy lines and pull out the tent pegs. Release
the poles from the eyelets and pull the ends out straight.
Push the poles out through the pole sleeves. The segments
might come apart when the poles are pulled. Try to even
out the tension on the elastic string by folding the segments
together from the middle. Do not allow the segments to
snap together, as dents could damage/weaken the
segments.
Packing up the tent
After the poles and tent pegs have been put in their bags
and the fly and inner tent have been laid out flat together,
lay the poles and pegs on top and roll everything together.
Squeeze the tent between your legs and push and twist it
into the pack bag.
1x Außenzelt (AZ)
1x Innenzelt (IZ)
3x Zeltstangen, farblich codiert
1x Satz Heringe
1x Reparaturhülse für Gestänge
2x Packsack
1x Gestängesack
1x Heringssack
Abspannleinen und -straffer (am Zelt befestigt)
zusätzlich bei Zero-G Line:
1x Tube Nahtdichter
de
de
Aufbau
en
de
das Zelt flach auf dem Boden auslegen
en
de
farbige Zeltstange in den gleichfarbigen Kanal ein-
führen
Pitching the tent
Spread the tent out flat
Lead the colour-coded pole through the
corresponding pole sleeve
Foto: Marc Pricivalle
das Ende in die Öse stecken
en
de
en
de
en
de
nun auf der anderen Seite die Ösenbänder greifen
und die Enden in die Ösen stecken
mit den anderen Stangen genau so verfahren
Stick one end of the pole in the eyelet
Do the same for the other poles
Now put the other ends of the poles in the other
eyelets
en
de
en
de
en
de
das Innenzelt mit den Steckschnallen an dem Außen-
zelt befestigen
Verbindungsgummis am Innenzelt an den Hacken
des Außenzeltes einhängen
vorderes Ende des Innenzeltes mit den Außenzelt
verbinden und spannen
Connect the inner tent to the flysheet with the
buckles
Buckle and tauten the front end of the inner tent to
the flysheet
Connect the elastic bands from the inner tent to the
hooks on the flysheet
bei starkem Wind auch zusätzlich die Gurtbänder
am Eingang nutzen
die beiden Gurtbänder an der hintere Seite mit
Heringen fixieren
nun die Gurtbänder vorne abspannen, dabei richtet
sich das Zelt auf
en
de
en
de
en
de
Stake out the back end of the tent by putting the
pegs through the webbing loops
Do the same for the front of the tent, and the tent
will become upright
If there are strong winds, also stake out the webbing
at the entrance
alle Heringe um das Zelt setzen
en
de
en
de
en
de
die Sturmabspannung stabilisiert das Zelt bei star-
kem Wind
leichte Einhandbedienung der Leinenspanner
Secure the tent with tent pegs
Secure the tent with the guy lines and tent pegs
Spread the tent out flatEasy one-hand adjustment
of the guy lines
APEX-Lüfter öffnen und mit Abstandhalter am
Klettband fixieren
en
de
en
de
en
de
Abdeckhaube mit den Stechschnallen befestigen
die Haube kann mit dem Gurt gespannt werden
Keep the APEX vents open by setting up the bracers
Connect the hood with the buckles
The hood can be tautened using the webbing
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
01
Download manual in English (PDF, 0.11 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Wechsel Outpost 3 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Wechsel Outpost 3 Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Wechsel Outpost 3 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Wechsel Outpost 3 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Wechsel. They might be able to provide an original manual. Are you looking for the manual of your Wechsel Outpost 3 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Wechsel
Model Outpost 3
Category Tents
File type PDF
File size 0.11 MB

All manuals for Wechsel Tents
More manuals of Tents

Frequently Asked Questions about Wechsel Outpost 3 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more
Manual Wechsel Outpost 3 Tent