Manual Vango Iris 500 Tent

Need a manual for your Vango Iris 500 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

Consignes de Montage - Iris (FR)
Montage en commençant par le double toit
Rassembler les arceaux et les poser sur le sol
Déferler le double toit et orienter dans le sens requis
Passer tous les mâts par les manches à l'extérieur du double toit
Les mâts et les entrées de manche qui leur correspondent sont codifiés par couleurs
Situer un bout de chaque mât dans l'œillet du tapis de sol sur la longueur d'un côté de la tente
S'assurer que les mâts joignent à la cheville correspondante, tous les mâts suivent les coutures du double toit
Rapprocher les bouts de chaque mât pour former un arc et situer les bouts dans les chevilles correspondantes
Reserrer toutes les sangles de tension en bas de chaque mât
Tirer la tente en avant pour la tensionner et, avec les piquets en V, planter les autres coins principaux
S'éloigner, en tenant le double toit, des points piquetés, pour que la tente 'prenne forme'
Tirer la tente pour tensionner le tapis de sol, et en piqueter les coins principaux de l'autre côté de la tente
S'assurer que la tente soit montée en ligne droite
Planter le reste des piquets, en utilisant les points de piquetage en bas des mâts
Attacher aux mâts tous les crochets des mâts du double toit
Le tapis de sol devrait être à plat et sans plis
Attacher TOUTES les cordes de tension en utilisant les piquets et en s'assurant que les points de fixation sont tendus uniformément.
Attacher la tente antérieure
Déferler la tente intérieure sous le double toit et orienter les portes selon le compartiment
Faire pendre la tente intérieure en attachant les crochets de celle-ci aux anneaux intérieurs du double toit
Les attaches intérieures sont codifiées par couleurs pour faciliter les connections du double toit
Commencer par derrière et travailler vers l'avant
Il est recommandé de retirer l'intérieur, en cas d'humidité, lorsque l'on démonte la tente.
Ensemble des Sangles de Tension
Sortir de la poche l'ensemble des sangles de tension et les attacher en haut du mât selon les correspondances
Les sangles se feront ajuster jusqu'à devenir raides
Les sangles de tension sont conçues pour stabiliser la structure en tunnel
Les sangles ne sont pas à utiliser hors des intempéries
Système de fixation Ring & Pin
Placer une extrémité de chaque arceau dans les oeillets correspondants, sur les bandes d'ancrage des arceaux.
Fixer les coins de la tente aux anneaux de métal, à l'aide de chevilles de fixation
Les piquets doivent se planter à un angle de 45 degrés pour le maximum de prise
Istruzioni per il montaggio - Iris (IT)
Primo montaggio del telo esterno
Unire i pali e distenderli al suolo
Aprire il telo esterno e posizionarlo nella direzione richiesta
Inserire tutti i paletti dentro i manicotti presenti sull'esterno del telo esterno
I paletti sono codificati a seconda del colore in modo da far combaciare i corrispondenti punti d'entrata dei manicotti del paletto
Fissare una estremità di ciascun paletto che si trova su un lato della tenda dentro il sistema a perno di metallo attaccato al telo impermeabile
Assicurarsi che i paletti siano fissati al corretto sistema a perno e che tutti i paletti seguano le cuciture del telo esterno corrispondenti al sistema a perno
Spingere i paletti in modo da formare un arco dalle estremità opposte e fissare le estremità dei paletti al corrispondente perno metallico
Tirare le cinghie da tensione alla base dei paletti
Tirare la tenda in avanti finché sia tesa e picchettare gli angoli principali dall'altre parte della tenda usando i picchetti 'a V'
Spingere il telo esterno in avanti, lontano dai punti picchettati, fino a quando la tenda prende forma
Tirare la tenda finché il telo impermeabile sia teso e picchettare gli angoli principali dall'altra parte della tenda
Assicurarsi che la tenda sia in linea retta
Picchettare i rimanenti paletti e punti di aggancio usando i picchetti di fissaggio alla base dei paletti
Attaccare tutte le clip dei paletti del telo esterno ai paletti
Il telo impermeabile dovrebbe essere piatto e privo di grinze
Fissare TUTTI i tiranti con i picchetti, facendo in modo che i punti in cui i tiranti sono collegati al tessuto siano tesi in modo uniforme.
Fissaggio interno
Aprire le tende interne all'interno del telo esterno e posizionare le entrate in modo da farle corrispondere con la zona giorno
Appendere l'interno fissando le olivette della tenda interna mediante gli anelli all'interno del telo esterno
I fissaggi interni sono codificati a seconda del colore in modo da abbinarsi alle clip sul tetto del telo esterno
Iniziare con la parte posteriore e poi procedere verso quella anteriore
È consigliabile rimuovere l'interno se umido quando si smonta la tenda.
Sistema TBS
Rimuovere il sistema TBS dalle tasche e attaccarlo alle corrispondenti clip sulla sommità del paletto
Aggiustare le cinghie fino a quando non siano tese
NON SOTTOPORRE AD ECCESSIVA TENSIONE. Una tensione eccessiva altera la forma della tenda
Le cinghie a tensione sono progettate per stabilizzare la struttura a tunnel della tenda
Non è necessario utilizzare le cinghie con condizioni meteorologiche serene
Sistema anello con paletto
Collocare un'estremità di ciascuno dei paletti negli occhielli corrispondenti delle cinghie di ancoraggio dei paletti
Fissare gli angoli della tenda attraverso gli anelli metallici usando i paletti.
I picchetti devono essere posizionati a 45 gradi per assicurare la massima presa
Download manual in English (PDF, 0.29 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Vango Iris 500 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Vango Iris 500 Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Vango Iris 500 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Iris 500 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Iris 500 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Vango
Model Iris 500
Category Tents
File type PDF
File size 0.29 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Iris 500 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more
Manual Vango Iris 500 Tent

Related products

Related categories