Manual Robens Green Spider Tent

Need a manual for your Robens Green Spider Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

GREEN SPIDER
robens.de
robens.co.uk
Congratulations on your new
Robens tent, designed and
created to accompany you out
into the great outdoors!
Note how everything is packed
together when you open the
transport sack and pull out the
tent. This will make it easier to
pack away again.
When selecting your campsite,
the ideal place would be an area
as even and clean of rocks,
branches and other sharp objects
as possible, and avoid placing the
tent directly under trees.
Assembling and setting up the
tent
Ensure that all entrances are
closed and put the tent poles
together.
1
Take the longest pole and put
its ends into diagonal opposite
“Fast-Foot” plastic cups located
at the corners of the tent oor
between the doors and at the rear
of the tent. Follow the colour code.
Fasten the other poles in the same
way. Raise the poles, connect
them to the centre carabiner hook
and clip the hooks sewn to the
ysheet onto the pole arches.
2
Now position the top cover and
attach it with the hooks.
3
Now position the tent and peg
it down well tensioned through the
adjustable pegging loops.
4
Finally, secure the tent against
strong winds with the pre-attached
guylines and pegs.
Tie the Storm Guard System and
the attached guylines around the
poles as illustrated.
Please turn over for more tips and
information.
Check out www.robens.de/tv for
pitching lm and tips.
GB DE DK FR NL
Wir beglückwünschen Sie zum
Kauf Ihres neuen Robens Zeltes
und wünschen Ihnen, dass Sie
hiermit viele schöne Touren
machen werden!
Merken Sie sich beim Önen
des Transportsacks und
Herausziehen des Zeltes wie
alles zusammengepackt ist. Das
wird Ihnen später das Verpacken
erleichtern. Bei der Auswahl des
Aufbauplatzes achten Sie bitte
darauf, dass er möglichst frei ist
von Steinen, Ästen oder anderen
scharfkantigen Objekten, und
vermeiden Sie, das Zelt unter
Bäumen aufzubauen.
Aufbau des Zeltes
Vergewissern Sie sich, dass die
Eingänge geschlossen sind, und
setzen Sie das Zeltgestänge
zusammen.
1
Nehmen Sie die längste Stange
und stecken Sie die Enden in die
diagonal gegenüberliegenden
Gestängeköcher an den Ecken des
Zeltbodens vorne zwischen den
Eingängen und am Heck des Zeltes.
Folgen Sie dabei der Farbkodierung.
Befestigen Sie nun ebenso die
übrigen Stangen. Richten Sie dann
die Stangen auf, verbinden Sie sie
mit dem zentralen Karabinerhaken
und hängen Sie die am Zelt
angenähten Haken ein.
2
Befestigen Sie dann die obere
Abdeckung mit den Haken.
3
Richten Sie nun das Zelt
abschließend aus und spannen
Sie es mit Erdnägeln an den
Abspannschlaufen.
4
Sichern Sie zum Schluss das Zelt
mit den Sturmleinen, zum Schutz
vor starkem Wind.
Schlingen Sie
dazu die Sturmleinen mitsamt dem
Storm Guard System an denen diese
befestigt sind, wie abgebildet, um die
Stangen.
Für weitere Tipps und Informationen
wenden Sie bitte dieses Blatt.
Tipps und Videos zum Aufbau
nden Sie auf www.robens.de/tv
GB Longest pole
DE Längste Stange
DK Længste stang
FR Mât plus longue
NL Langste stok
GB Attach the top cover
DE Obere Abdeckung befestigen
DK Fastgør toppen på teltet
FR Attachez la couverture
NL Bevestig de bovenste afdekking
Storm Guard System
GB Doors
DE Eingänge
DK Døre
FR Des portes
NL Deuren
Tillykke med dit nye Robens
telt, som er designet og
udviklet til at følge dig på store
oplevelser ude i naturen!
Bemærk, hvordan alt er
pakket sammen, når du åbner
transportposen og tager teltet ud.
Det vil gøre det lettere at pakke
teltet sammen igen.
Den ideelle lejrplads er et område,
der er så jævnt som muligt og
uden skarpe genstande som f.eks.
sten og grene. Undgå at placere
teltet direkte under træer.
Samling og opsætning af teltet
Kontroller, at alle indgange er
lukket, og saml teltstængerne.
1
Tag den længste stang,
og placer enderne diagonalt i
Fast-Foot plastikhylstrene på
bundens hjørner placeret mellem
dørerne og bagpå teltet. Følg
farvemarkeringerne på stængerne.
Fastgør de andre stænger på
samme måde. Rejs stængerne,
og fastgør dem til krogen i midten.
Sæt derefter krogene, der er syet
fast på oversejlet, fast på teltets
buer.
2
Fastgør toppen heover teltet
med kroge.
3
Placer nu teltet, og fastgør
det godt opstrammet med
pløkker gennem de regulerbare
pløkstropper.
4
Til sidst sikres teltet mod
stærk vind med de formonterede
barduner og pløkker.
Bind Storm Guard systemet og
de fastgjorte barduner rundt om
stængerne som vist.
Se næste side for ere tips og
oplysninger.
Se opstillingslm og tips på
www.robens.de/tv
Félicitations pour l’achat de votre
nouvelle tente Robens, conçue
et créée pour vous accompagner
dans vos excursions en pleine
nature.
Notez la façon dont les éléments
sont agencés dans le sac de
rangement, lorsque vous l’ouvrez
pour sortir la tente. Ceci vous
facilitera le rangement après
démontage.
Idéalement, l’aire de camping
sélectionnée devrait orir une
surface aussi plane et libre de
cailloux, de branches et d’objets
pointus que possible. Évitez aussi
d’installer la tente directement sous
un arbre.
Installation et montage de la tente
Vériez que toutes les entrées sont
fermées et assemblez les mâts.
1
Tag Prenez le mât le plus long
et placez ses extrémités dans les
supports en plastique «Fast-
Foot» de la diagonale opposée,
situés dans les angles sur le sol
de la tente entre les portes et à
l’arrière de la tente. Suivez le code
couleur. Fixez les autres mâts de
la même manière. Soulevez les
mâts, connectez-les au crochet à
mousqueton central et accrochez
les crochets cousus au double toit
aux arceaux des mâts.
2
Installez la couverture et xez-la
à l’aide des crochets.
3
À présent, mettez la tente
en place et xez-la à l’aide des
boucles d’ancrage réglables.
Mettez bien la tente en tension.
4
Enn, arrimez solidement la
tente contre les vents forts avec les
haubans pré-attachés et les piquets.
Fixez le Storm Guard System et les
haubans associés autor des mâts,
comme illustré ci-contre.
Consultez le verso de cette notice
pour plus d’informations et de
conseils.
Allez sur www.robens.de/tv pour
découvrir une vidéo et des conseils
de montage.
Gefeliciteerd met uw nieuwe
Robens tent, ontworpen voor
jarenlange trouwe dienst in het
open veld!
Kijk goed hoe alles ingepakt is als u
de opbergzak openmaakt en de tent
eruit haalt. Dan is het gemakkelijk
om alles weer in te pakken.
Bij het kiezen van de kampeerplaats
is de beste plek een stuk grond dat
gelijkmatig is en waar zo weinig
mogelijk stenen, takken of andere
objecten liggen. Zet de tent niet
onder bomen op.
De tent in elkaar zetten en
opzetten
Zorg ervoor dat alle openingen
gesloten zijn en plaats de
tentstokken in elkaar.
1
Neem de langste stok en steek
de uiteinden ervan in de diagonaal
tegenovergestelde plastic Fast-
Foot-doppen in de hoeken van
de tentvloer, tussen de ingangen
en aan de achterzijde van de
tent. Volg de kleurcode. Bevestig
de andere stokken op dezelfde
manier. Hef de stokken op, sluit ze
aan op de middelste karabijnhaak
en maak de haken die aan de
buitentent zijn vastgenaaid vast
aan de stokbogen.
2
Plaats de bovenste afdekking en
bevestig deze door middel van de
haken.
3
Plaats de tent nu op de
gewenste positie en zet ze vast
met haringen door de verstelbare
haringlussen.
4
Gebruik de voorbevestigde
scheerlijnen en haringen om te
zorgen dat de tent in harde wind kan
blijven staan.
Bevestig het Storm Guard System
en de scheerlijnen aan de stokken
zoals weergegeven.
Sla de bladzijde om voor meer tips
en informatie.
Ga naar www.robens.de/tv voor een
video en tips over het opzetten van
tenten.
1
1
4
2
© 09/2016 Oase Outdoors ApS
Download manual in English (PDF, 0.57 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Robens Green Spider Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Robens Green Spider Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Robens Green Spider Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Robens Green Spider Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Robens. They might be able to provide an original manual. Are you looking for the manual of your Robens Green Spider Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Robens
Model Green Spider
Category Tents
File type PDF
File size 0.57 MB

All manuals for Robens Tents
More manuals of Tents

Frequently Asked Questions about Robens Green Spider Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more
Manual Robens Green Spider Tent

Related products

Related categories