Manual Robens Buzzard UL Tent

Need a manual for your Robens Buzzard UL Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

2
BUZZARD UL
robens.de
robens.co.uk
Congratulation on your new
Robens tent designed and
created to accompany you out
into the great outdoors.
When selecting your campsite,
the ideal place would be an area
as even and clean of rocks,
branches and other sharp objects
as possible.
Spread out the tent and place it
with the door facing the desired
direction, avoid placing the tent
directly under trees, and position it
with the end facing the direction of
the wind, for best results in windy
conditions.
Assembling and setting up the
tent
Ensure that the entrance is closed.
1
Peg down the two corners at
each end of the tent.
2
Put the shock-corded pole
together and gently push it
through the outside opening on
the ysheet until it comes to a stop
in the webbing pocket at the end
of the sleeve.
The tent can now
be raised. Place the end of the pole
down into its metal eyelet applying
pressure to the pole forming an arch.
3
Fasten both of the short poles in
the eyelets at the ends of the tent.
Tension the tent by pegging down
the ropes on the ends of the tent.
4
Then x the tent all around
with pegs and check again that all
points are evenly tensioned.
Finally, secure the tent against
strong winds with the pre-attached
guylines and pegs.
Please turn over for more tips and
information.
Check out www.robens.de/tv for
pitching lm and tips.
GB DE DK FR NL
Wir beglückwünschen Sie zum
Kauf Ihres neuen Robens Zeltes
und wünschen Ihnen, dass Sie
hiermit viele schöne Touren
machen werden!
Merken Sie sich beim Önen
des Transportsacks und
Herausziehen des Zeltes wie alles
zusammengepackt ist. Das wird Ihnen
später das Verpacken erleichtern.
Bei der Auswahl des Aufbauplatzes
achten Sie bitte darauf, dass er
möglichst frei ist von Steinen,
Ästen oder anderen scharfkantigen
Objekten, und vermeiden Sie, das
Zelt unter Bäumen aufzubauen.
Breiten Sie das Zelt aus, mit dem
Eingang in der gewünschten
Richtung. Und platzieren Sie ein
Ende in Windrichtung für höhere
Windstabilität.
Aufbau des Zeltes
Vergewissern Sie sich, dass der
Eingang geschlossen ist.
1
Befestigen Sie die zwei Ecken an
beiden Zeltenden mit Heringen.
2
Setzen Sie nun die mit Gummizug
verbundene Stange zusammen und
schieben Sie sie in die außen am
Überzelt bendliche Önung bis sich
das Ende in der Gurtbandtasche
auf der gegenüberliegenden
Seite bendet.
Stecken Sie ein
Gestängeende in den dazugehörigen
Öse wobei die Stange einen Bogen
formt.
3
Befestigen Sie die beiden kurzen
Stangen in den Ösen an den
Zeltenden.
Spannen Sie das Zelt mit
den Leinen an den Enden ab.
4
Jetzt können Sie das Zelt komplett
mit Heringen sichern.
Kontrollieren
Sie nochmals, ob alle Punkte
gleichmäßig gespannt sind. Spannen
Sie zum Schluss das Zelt mit den
Sturmleinen ab, zum Schutz vor
starkem Wind.
Für weitere Tipps und Informationen
wenden Sie bitte dieses Blatt.
Tipps und Videos zum Aufbau
nden Sie auf www.robens.de/tv
Tillykke med dit nye Robens
telt, som er designet og
udviklet til at følge dig på store
oplevelser ude i naturen!
Bemærk, hvordan alt er
pakket sammen, når du åbner
transportposen og tager teltet ud.
Det vil gøre det lettere at pakke
teltet sammen igen.
Den ideelle lejrplads er et område,
der er så jævnt som muligt og
uden skarpe genstande som f.eks.
sten og grene. Undgå at placere
teltet direkte under træer.
Bred teltet ud med indgangen
i den ønskede retning. Placer
teltets ene ende mod vinden for at
opnå bedre stabilitet i blæsevejr.
Samling og opsætning af teltet
Kontroller, at indgangen er lukket.
1
Pløk de to hjørner i hver ende
af teltet fast.
2
Sæt den elastikforbundne
stang sammen. Skub nu forsigtigt
stangen gennem kanalen, indtil
den stopper i lommen for enden af
kanalen.
Placer stangens ene ende
i metaløjet ved at trykke på stangen,
så der formes en bue.
3
Fastgør begge korte stænger i
øjerne ved teltets ender.
Stram teltet ud ved at
spændebardunerne ved teltets
ender ud og pløk dem fast.
4
Spænd teltet jævnt ud og
fastgør det ved at sætte pløkker i
alle stropper hele vejen rundt om
teltet.
Til sidst sikres teltet mod stærk
vind med de formonterede
barduner og pløkker.
Se næste side for ere tips og
oplysninger.
Se opstillingslm og tips på
www.robens.de/tv
Félicitations pour l’achat de
votre nouvelle tente Robens,
conçue et créée pour vous
accompagner dans vos
excursions en pleine nature.
Notez la façon dont les éléments
sont agencés dans le sac de
rangement, lorsque vous l’ouvrez
pour sortir la tente. Ceci vous
facilitera le rangement après
démontage.
Idéalement, l’aire de camping
sélectionnée devrait orir une
surface aussi plane et libre de
cailloux, de branches et d’objets
pointus que possible. Évitez aussi
d’installer la tente directement
sous un arbre.
Installation et montage de la
tente
Vériez que toutes les entrées
sont fermées.
1
Ancrez les deux coins à chaque
extrémité de la tente.
2
Assemblez les sections de mât
à cordon élastique et poussez
les doucement par l’ouverture
extérieure du double-toit jusqu’à
arriver en butée dans la poche de
sangles à l’extrémité de la gaine.
La tente peut maintenant être
dressée. Insérez l’extrémité du
mât dans l’œillet, en mettant le
mât sous tension pour le plier en
arceau.
3
Insérez les deux mâts courts
dans les œillets situés aux
extrémités de la tente.
Mettez la tente en tension à l’aide
des sangles situées à chaque
extrémité.
4
Puis, xez la tente sur tout le
pourtour en enfonçant des piquets
et en vériant de nouveau que
tous les points de xation sont
tendus de manière équilibrée.
Enn, arrimez solidement la
tente contre les vents forts avec
les haubans pré-attachés et les
piquets.
Consultez le verso de cette notice
pour plus d’informations et de
conseils.
Allez sur www.robens.de/tv
pour découvrir une vidéo et des
conseils de montage.
Gefeliciteerd met uw nieuwe
Robens tent, ontworpen voor
jarenlange trouwe dienst in het
open veld!
Kijk goed hoe alles ingepakt is
als u de opbergzak openmaakt
en de tent eruit haalt. Dan is het
gemakkelijk om alles weer in te
pakken.
Bij het kiezen van de
kampeerplaats is de beste plek
een stuk grond dat gelijkmatig
is en waar zo weinig mogelijk
stenen, takken of andere objecten
liggen. Zet de tent niet onder
bomen op.
Spreid de tent uit, met de ingang
in de gewenste richting. Plaats
één kant tegen de wind in voor
meer windstabiliteit.
De tent in elkaar zetten en
opzetten
Zorg ervoor dat de opening
gesloten zijn.
1
Maak de twee hoeken met
haringen vast aan elk uiteinde van
de tent.
2
Zet de stokken met
amortiseurkoorden in elkaar
en duw ze voorzichtig door de
buitenopening van de buitentent,
totdat de stok niet meer verder
kan in de haringluszak aan het
eind van de hoes.
De tent kan nu rechtop worden
gezet. Steek het uiteinde van de
stok in de ogen en oefen druk
uit op de stok door een boog te
vormen.
3
Steek beide korte stokken in de
oogjes aan de uiteinden van de tent.
Trek de tent strak met de haringen
aan de uiteinden.
4
Zet de tent vervolgens rondom
vast met haringen en controleer
opnieuw of alle punten even strak
gespannen staan.
Gebruik de voorbevestigde
scheerlijnen en haringen om te
zorgen dat de tent in harde wind
kan blijven staan.
Sla de bladzijde om voor meer tips
en informatie.
Ga naar www.robens.de/tv
voor een video en tips over het
opzetten van tenten.
GB Guyline at the tent
ends
DE Abspannleine an den
Enden des Zeltes
DK Barduner ved hver
ende af teltet
FR Haubans aux
extrémités de la tente
NL Scheerlijnrn aan
de tentuiteinden
GB Short pole
DE Kurze Stange
DK Kort stang
FR Mât court
NL Korte stok
GB Pegging loops
DE Abspannschlaufen
DK Pløkstropper
FR Boucles d’ancrage
NL Haringlussen
GB Pegging loops
DE Abspannschlaufen
DK Pløkstropper
FR Boucles d’ancrage
NL Haringlussen
GB Pegging loops
DE Abspannschlaufen
DK Pløkstropper
FR Boucles d’ancrage
NL Haringlussen
GB Loop with eyelet
DE Schlaufe mit Öse
DK Strop med øje
FR Boucle à œillet
NL Lus met oog
© 09/2016 Oase Outdoors ApS
Download manual in English (PDF, 0.58 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Robens Buzzard UL Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Robens Buzzard UL Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Robens Buzzard UL Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Robens Buzzard UL Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Robens. They might be able to provide an original manual. Are you looking for the manual of your Robens Buzzard UL Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Robens
Model Buzzard UL
Category Tents
File type PDF
File size 0.58 MB

All manuals for Robens Tents
More manuals of Tents

Frequently Asked Questions about Robens Buzzard UL Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (389) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (290) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (223) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (161) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (134) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (110) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (102) Read more
Manual Robens Buzzard UL Tent

Related products

Related categories