Home > Kitchenware > Blenders > Hamilton Beach Blenders > Hamilton Beach 50128 Blender

Manual Hamilton Beach 50128 Blender

Need a manual for your Hamilton Beach 50128 Blender? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SAVE THESE INSTRUCTIONS

13. Keep hands and utensils out of the jar and away from the cutting

blade, while blending or chopping food, to reduce the risk of

severe personal injury and/ or damage to the blender or available

attachments (attachments may not be provided with blender). A

rubber spatula may be used but must be used only when blender is

not running.

14. Blades are sharp; handle carefully – especially when assembling,

disassembling, or cleaning inside blender jar.

15. Do not use a broken, chipped, or cracked blender jar.

16. Do not use broken, cracked, or loose cutting blade assembly.

17. To reduce the risk of injury, never place cutting blade assembly on

base without jar properly attached.

18. Always operate blender with lid in place.

19. When blending hot liquids, remove filler-cap of two-piece lid or open

vent opening of lid with mess-free spout, and close any lid openings

along the edge intended for pouring. Hot liquids may push lid off jar

during blending. To prevent possible burns: Do not fill blender jar

beyond the 3-cup (710-ml) level. With the protection of an oven mitt

or thick towel, place one hand on top of lid. Keep exposed skin away

from lid. Start blending at lowest speed.

20. Ensure collar on base of blender jar is tight and secure. Injury can

result if moving blades accidentally become exposed.

21. If the jar should twist or rotate when the motor is switched ON, switch

OFF ( ) immediately and tighten jar in collar or on blender base.

22. Do not leave blender unattended while it is operating.

23. Check that the appliance is OFF ( ) before plugging cord into wall

outlet. To disconnect, turn the control to OFF ( ); then remove plug

from wall outlet. To unplug, grasp the plug and pull from the outlet.

Never pull from the power cord.

24. Do not use appliance for other than intended purpose.

25. CAUTION! In order to avoid a hazard due to inadvertent resetting of

the thermal cut-out, this appliance must not be supplied through an

external switching device, such as a timer, or connected to a circuit

that is regularly switched on and off by the utility.

26. Be careful if hot liquid is poured into the blender container as it can be

ejected out of the appliance due to a sudden steaming.

Rating

Let us know what you think about the Hamilton Beach 50128 Blender by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Hamilton Beach 50128 Blender?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Hamilton Beach 50128 Blender. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Hamilton Beach 50128 Blender. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Hamilton Beach. They might be able to provide an original manual. Are you looking for the manual of your Hamilton Beach 50128 Blender in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Hamilton Beach
Model	50128
Category	Blenders
File type	PDF
File size	0.87 MB

All manuals for Hamilton Beach Blenders
More manuals of Blenders

Frequently Asked Questions about Hamilton Beach 50128 Blender

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.