Manual Coleman Bayside 6 Tent

Manual

BAYSIDE

TM

6 TENT MODEL 2000005494

STITCH LINE

12. Attach frame clips along edges of tent to the Main & Side Poles. (Fig. 6)

13. Locate the straps with toggle & loop above closet at back of tent.

Wrap strap around black Main Poles where they cross; then insert

toggle through loop to secure. (Fig. 7)

14. Stretch tent until taut, then secure metal loops and web straps

located on all sides and corners of tent with stakes. (Fig. 8)

Pole Descriptions

Pole Pole Pole

Description Qty. Dia. Repair Kit Replacement Kit

Main Pole, black, thick 2 9.5mm 5010000540 5010000548

Front Pole, black with

green center insert 1 9.5mm 5010000540 5010000548

Side pole, black with

blue center insert 2 8.5mm 5010000541 5010000547

Rainfly Pole, black with

red center insert 1 8.5mm 5010000541 5010000547

6. Insert end of Main Poles (black, thick) into pins located in the front

corners of the tent. (Fig. 2 & 4)

7. Go to opposite end of each Main Pole and gradually apply pressure

to each forming arches. Insert the pin located at the outside corners

of the closet at the back of tent into each pole end. (Fig. 2 & 4)

8. Insert end of each Side Pole (black with blue center insert) into pin

located on the sides of the tent. (Fig. 3 & 4)

9. Go to opposite end of each Side Pole and gradually apply pressure

to form an arch. Insert the pin into pole end at the inside corners of

the closet. (Fig. 3 & 4)

(continued on other side)

Closet

Pin for

Main Pole (black,

thick) at outside

corners of closet

Pin for Side Pole (black

with blue center insert)

at inside corners of

closet

Fig. 4

Pin for Main Pole (black,

thick) at front

corners of tent

Fig. 2

Pin for Side Pole (black with

blue center insert) at sides

of tent

Fig. 3

10. Insert end of Front Pole (black with green center insert) (above door)

into remaining pin located on the side of the tent. (Fig. 5 & 5A)

11. Go to opposite end of Front Pole and gradually apply pressure to

form an arch. Insert the pin into pole end at the opposite side of

tent. (Fig. 5 & 5A)

Fig. 6

Fig. 8

Fig. 7

Front of Tent

Fig. 5

Door

5A

Front Pole (black with

green center insert)

above door

To Attach Rainfly

1. Drape Rainfly over tent with maroon vestibule flaps located at the

front of the tent (see Fig. 9 on other side of this tag).

NOTE: Hook and loop fasteners, located on seams of underside of

Rainfly, should be centered over black Main Poles.

Before you begin

Read all instructions before set up.

Select a level site clear of rocks, branches, and other hard or sharp objects, •

to install your tent.

WARNING: Keep clear of overhead power lines.

Do not set up your tent under trees because of potential lightning strikes or •

falling tree limbs in inclement weather.

Secure with • all stakes and guylines provided to prevent property damage or

personal injury.

For best results in windy conditions, position narrow end of tent into the wind.•

Enlist the help of at least one other person to assist you when it is time to •

assemble the tent.

To Set Up Tent

1. Unfold tent and spread out on a clean, level surface with the door

facing the desired direction. (Fig. 1)

2. Assemble all poles by interlocking the shock-corded,

sections together.

3. Insert long, black Main Poles through the black trimmed sleeves on

top of tent forming an X”. (Fig. 1)

4. Insert front pole with green center insert through the green

trimmed sleeve located above door. (Fig. 1)

5. Insert shorter, black Side Poles with blue center insert through the

blue trimmed sleeves. (Fig. 1)

Fig. 1

Door

Front of Tent

Main Poles (black, thick)

Front Pole

(black with

green center

insert)

Side Pole (black with

blue center insert)

Side Pole (black with

blue center insert)

Closet

Pin for Side Pole

(black with

blue center

insert)

Pin for

Side Pole

(black with

blue center

insert)

Pin for Main Pole (black, thick)

Pin for Main Pole (black, thick)

3. Insert end of Rainfly Pole into pin on either

side of front door. (Fig. 10)

4. Go to opposite end of Rainfly Pole and

gradually apply pressure to form an arch.

Insert the pin into pole end at other side of

the door. (Fig. 10 & 13)

5. Locate all hook & loop fasteners on

underside of Rainfly and wrap around all

Main Poles, Side Poles & Rainfly Pole to

secure. (Fig. 11)

2. Insert the Rainfly Pole (black with red center insert) through sleeve with

red trim on underside of Rainfly above front door of tent. (Fig. 9)

Fig. 10

Fig. 11

Fig. 9

Sleeve with Red Trim

Rainfly Pole (black

with red center insert)

Rainfly

Front of Tent

Door

Vestibule Flap

Vestibule Flap

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Coleman Bayside 6 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Coleman. They might be able to provide an original manual. Are you looking for the manual of your Coleman Bayside 6 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Coleman Tents
More manuals of Tents

Frequently Asked Questions about Coleman Bayside 6 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Coleman Pebble Creek Tent

Manual

Coleman Elite Weathermaster 6 Tent

Manual

Coleman Elite Montana 8 Tent

Manual

Coleman Somerset Pass Tent

Manual

Coleman Hampton 9P Tent

Manual

Coleman Tallgrass Tent

Manual

Coleman Pegasus Tent

Manual

Coleman Evanston 6 Tent

Related categories