Home > Camping & Outdoor > Tents > Chinook Tents > Chinook Cyclone 3 Tent

Manual Chinook Cyclone 3 Tent

Need a manual for your Chinook Cyclone 3 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Cyclone 3

tent assembly

instructions

Cyclone 3

instructions de

montage

IMPORTANT INFORMATION

Thank you for purchasing your

new Chinook tent. We have

designed and manufactured

these tents to give years

of trouble free enjoyment

and use. To maximize the

enjoyment of your tent, please

read the following information

and assembly instructions

with care.

• Become familiar with your

new Chinook tent at home

by assembling the tent

at home before your rst

camping trip. After a long day

of travel a campsite is not a

good place to learn how to

set up a new tent.

• When selecting a campsite,

make sure that the area is

at, has good drainage and is

free of sharp objects that may

damage the tent.

• Carefully push each pole

through the proper pole

sleeve. Never force the pole

as this may cause damage to

the sleeve or pole.

PLEASE USE

COMMON SENSE

• Erect your tent upwind away

from campres.

• Do not cook with open ames

inside the tent.

• Do not store ammables or

refuel stoves or lanterns in

your tent.

FIRE WARNING

Your Chinook tent fabric is

treated with a re retardant

but is NOT FIREPROOF. If

exposed to open ames or

other ignition sources the tent

may ignite and burn.

Tent

1. Remove all parts from the tent bag. Spread the tent body with its oor on

the ground and with the web/grommet loops in each corner. Be sure to

clear the area of any sharp objects that may damage the tent fabric.

2. Assemble all of the shock-corded poles. Carefully join each section to avoid

damaging the rod ends.

3. Using the tent body poles (167.5"/425 cm poles), insert the poles through

the black mesh pole sleeves found along the top of the tent body. Two of

the poles run from the front corners of the tent body to the back corners,

crossing in the center of the tent canopy. The third pole runs from one side

of the tent to the other underneath the other two poles.

4. Situated at each corner and at each side of the tent body are web stakeout

loops with grommets attached. Working with one pole at a time, insert the

pole tips into the grommet located closest to the tent.

5. Attach all clips onto the poles.

Fly

1. Spread the y over the tent canopy making sure that the double door

opening on the y is located at the front door (largest door) of the tent body.

2. Attach the Velcro tabs on the inner y to the tent poles.

3. Attach the y to the tent body using the quick-release buckle/strap system

at each corner.

4. Adjust quick-release buckle/strap system for a more taut y.

Pegging and Guylines

1. Starting with the tent corners, place a peg through each web loop located

along the oor of the tent body and peg out securely.

2. Pull out the lower front of the vestibule away from tent and place a peg

through each of the web loops and stake out securely.

3. Located along the lower sides of the y are shock-corded loops, peg each

loop securely.

4. There are delta guyline points with a grommet located on the outer surface

of the y. Attach a guyline to each point and fasten to a peg or other secure

object making sure the guylines are taut.

5. By staking and guying your tent

a. the tent will be more stable in windy conditions

b. the y will shed rain better

c. air circulation to the inner tent will be increased

IMPORTANTE INFORMATION

Merci pour l’achat de votre

nouvelle tente Chinook. Nous

avons dessiné et fabriqué nos

tentes pour vour donner des

années de plaisir sans maux

de tête. Pour maximiser votre

plaisir, s.v.p. lire attentivement

les instructions de montage

et de soins à prendre pour

conserver votre tente en bonne

condition.

• Familiariser vous avec votre

tente Chinook en la montant

au moins une fois dans la

cour arrière chez vous avant

votre excursion.

• Quand vous choisissez votre

emplacement pour monter

votre tente, assurez vous

d’un endroit plat, bien drainé

et nettoyer de tous objets

pouvant endommager votre

tente.

• Glisser soigneusement

chaque tige dans sa gaine

respective. Ne jamais forcer

les tiges car cela pourrait

causer des dommages à la

pole ou à la gaine.

VEUILLEZ UTILISER VOTRE

BON SENS

• Monter votre tente eloignée du

feu de camp.

• Ne jamais cuisiner à l’intérieur

de la tente.

• Ne pas remiser de liquides

inammable dans votre tente.

INFLAMMABILITÉ

Votre tente Chinook a été traité

avec un enduit antiamme

mais n’est pas à l’épreuve du

feu. Une exposition directe à

une amme ou une source de

chaleur excessive peut causer

une incendie.

Tente

1. Sortir toutes les composantes du sac de rangement. Étaler le plancher

de la tente sur le sol. Assurez vous de bien nettoyer l’espace de tout objet

pouvant endommager le plancher de tente.

2. Assembler toutes les poles. Prendre soin de ne pas endommager les

embouts.

3. Utiliser l’armature de tente (167.5"/425cm) et l’insérer dans la gaine

noire située dans le faîte de la tente. Deux des tiges doivent être placées

dans l’oeillet du coin avant à celui arrière. La troisième tige doit être placé

d’un coin à l’autre de la tente passant en dessous des deux autres tiges.

4. À chaque coin de la tente et de chaque côté il y a des attaches renforcies.

Installer une tige à la fois, insérer l’embout de la tige dans l’attache la

plus près de la tente.

5. Attacher tous les crochets aux poles.

Double Toit

1. Déployer le double toit en vous assurant que l’ouverture de la porte soit

en avant de la tente.

2. Attacher les “Velcro” du double toit à l’armature de la tente.

3. Attacher le double toit à l’armature de la tente en utilisant les courroies

d’attaches rapides.

4. Ajuster les courroies d’attaches rapides pour un double toit bien tendu.

Piquets et Tendeurs

1. Commencer par les coins de la tente, placer un piquet dans chacune des

attaches renforcies tout autour de la tente et bien ancrer.

2. Etirer vers l’extérieur la porte inférieure du vestibule et bien ancrer à l’aide

des piquets dans chacune des attaches renforcies.

3. Situé tout autour du double toit il y a les cordes élastiques qu’il faut bien

ancrer à l’aide de piquets.

4. À la surface extérieur du double toit il y a des points d’attaches delta avec

oeillet. Attacher un tendeur à chacun de ses oeillets bien ancrer et bien

tendre le tendeur.

5. Par un bon ancrage de votre tente

a) Votre tente sera plus stable par temps venteux

b) Le double toit évacura mieux la pluie

c) L’aération de la tente sera augmentée

cyclone3_TAI_2006.ID 11/2/06, 12:50 PM2

Rating

Let us know what you think about the Chinook Cyclone 3 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Chinook Cyclone 3 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Chinook Cyclone 3 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Chinook Cyclone 3 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Chinook. They might be able to provide an original manual. Are you looking for the manual of your Chinook Cyclone 3 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Chinook
Model	Cyclone 3
Category	Tents
File type	PDF
File size	0.36 MB

All manuals for Chinook Tents
More manuals of Tents

Frequently Asked Questions about Chinook Cyclone 3 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more