Manual Bikemate 22967 Cycling Computer

Manual

The minute display flashes.

− Press the right button

3

until the correct number

appears.

The minute display is set.

− Confirm your entry by pressing

the left button

4

.

Setting the backlight

You can choose between LT-1 and

LT-2 mode.

LT1-1 mode:

The backlight will be activated for

approx. 3 seconds as soon as any

button is pressed in any mode

within the set time frame.

LT2 MODE:

The backlight will turn on or off if

the right button

3

is held down

for approx. 3 seconds.

Setting:

The LT-1 mode indicator flashes on

the display.

− Press the right button

3

to

switch between LT-1 mode and

LT-2 mode.

− Confirm your entry by pressing

the left button

4

.

After you have confirmed LT-2

mode, the main function indicator

will appear.

After you have confirmed LT-1

mode, you will set the time frame

(start and stop time) for activating

the backlight.

The hour display flashes.

− Press the right button

3

until the correct number

appears.

The hour display is set.

− Confirm your entry by pressing

the left button

4

.

The minute display flashes.

− Press the right button

3

until the correct number

appears.

The minute display is set.

− Confirm your entry by pressing

the left button

4

.

Testing the bicycle

computer

− Turn the front wheel of the

bicycle.

The speed appears in the

display

2

if the bicycle

computer

1

, sensor

11

and

magnet

7

have been correctly

mounted. If the speed does

not appear in the display, check

and repeat the assembly proce-

dure if necessary (see chapter

“Assembly”).

Restarting bicycle

computer

− To reset stored data, press the

left button

4

and right but-

ton

3

together for approx.

5seconds.

After restarting/resetting the

device, all settings must be reen-

tered (see section “Setting tire

circumference” to section “Setting

the time”).

Automatic power-off of

the bicycle computer

When at a standstill, the bicycle

computer automatically powers

off after approx. 5 minutes with-

out loss of data.

− To switch the

bicycle computer

1

back on again, press the

right button

3

or the

left button

4

.

Automatic stop-start

function

All functions have an automatic

start-stop function (exception:

stopwatch and time).

− To activate this stop-start func-

tion, first switch on the bicycle

computer

1

by pressing the

left button

4

or the right

button

3

.

Measuring starts when the mag-

net

7

passes the sensor

11

for

the first time. If the bicycle is still,

it waits approx. 3seconds for a

new signal. If there is no further

signal, the measuring process

stops automatically.

Modes/functions

The speed and time indicator

appears after the bicycle computer

has started up (see Fig.H).

Speed

• This is constantly calculated

and updated; it is always

shown in the middle of the

display

2

. Max. measuring

range: up to 199.9 km/h / mph.

CLK (time) / SCAN

• The time is shown in 24-hour

mode. It is set as described in

the section “Setting the time”.

− Press the left button to access

the SCAN function.

The word SCAN appears in the

bottom left of the display. In this

mode, the functions DST, TM, and

AV SPD are automatically dis-

played at a 2 second interval.

− Press the left button to switch

back to time.

− Press the right button to

switch to the stopwatch.

STW (Stopwatch)

− Press the left button to start/

stop the stopwatch. Maximum

measuring range: 9:59:59.

− Press the right button to

switch to trip distance.

DST (distance)

The counter for trip distance will

automatically start when you

start cycling.

Maximum measuring range:

999.99.

− Press the left button to switch

between the trip distance and

total distance.

− Press the right button to

switch to the cycling time

indicator.

TOT DST (total distance)

The total kilometers (miles) cycled

are saved.

Maximum measuring range:

99999.

− Press the right button to

switch to the cycling time

indicator.

TM (cycling time)

The total cycling time since the

last reboot is shown. Maximum

measuring range: 9:59:59.

− Press the right button to

switch to the average speed.

AV SPD (average speed)

Maximum measuring range: 199.9

km/h or mp/h.

− Press the left button to switch

between the average and

maximum speed.

− Press the right button to

switch to calorie counter.

MX SPD (maximum speed)

The maximum speed reached is

stored.

Maximum measuring range: 199.9

km/h or mp/h.

− Press the right button to

switch to calorie counter.

CAL (calorie counter)

The average calories burned

(kcal) are shown.

Maximum measuring range:

999.9.

− Press the left button to switch

between the calorie counter,

total calories burned and the

fat burning meter.

− Press the right button to

switch to the temperature.

TOTCAL (total calories burned)

The total calories burned (kcal)

since the last reboot is shown.

Maximum measuring range:

99999.

− Press the right button to

switch to the temperature.

FAT (fat burning meter)

The average amount of fat

burned is shown in grams.

Maximum measuring range:

999.9.

− Press the right button to

switch to the temperature.

TEP (temperature)

The temperature is measured and

updated approx. every 2 minutes.

− Press the left button to switch

between the current, maxi-

mum and minimum tempera-

ture measured.

− Hold the left button for the

current temperature indicator

for approx. 5 seconds to switch

to °F (Fahrenheit).

− Press the right button to

switch to the time.

Speed comparison

Cycling faster or slower than

the average speed up to this

point will be shown with

or

on the top left next to the speed

indicator.

Resetting data

(AV SPD, MX SPD, TOTCAL, STW, DST,

TOT DST, TM)

− Press the right/left button

until the corresponding func-

tion is shown.

− Hold the left button down for

approx. 3 seconds to reset the

value.

Changing the battery

1. Open the battery com-

partment of the bicycle

computer

1

or sensor

11

by

turning the battery compart-

ment cover

14

counterclock-

wise with a coin (see Fig.E).

2. Remove the depleted

battery

9

or

10

using a

pointed object.

3. Insert a new battery so that

the positive pole (+) is facing

upward.

4. Replace the battery compart-

ment cover.

5. Close the battery compart-

ment by turning the battery

compartment cover clockwise

with a coin (see Fig.E).

6. Start the bicycle computer

and enter the settings again

(see section “Selecting kilo-

meters/miles” to section “Set-

ting the backlight”).

Cleaning and

maintenance

NOTICE!

Risk of short circuit!

Liquid that has penetrated the

housing may cause a short-cir-

cuit.

− Never immerse the bicycle

computer in liquids.

− Make sure that no liquid

penetrates the housing.

NOTICE!

Risk of damage!

Improper cleaning can damage

the bicycle computer.

− Do not use any aggressive

cleaners, brushes with

metal or nylon bristles as

well as sharp or metallic

cleaning utensils such as

knives, hard scrapers or the

like. They could damage

the surfaces.

Watertightness

Your bicycle computer is pro-

tected against splashing water,

please do not submerge in water.

− Only clean with a damp

cleaning cloth and wipe dry

afterwards.

Storage

All parts must be completely dry

before storage.

− Always store the bicycle com-

puter

1

in a dry area.

− Protect the bicycle computer

from direct sunlight.

− Store the bicycle computer

so that it is not accessible to

children, securely locked away

and at a storage temperature

between 14°F and 122°F

(-10°C and 50°C) (room tem-

perature).

Troubleshooting

No speed display:

• Check the alignment of the

sensor

11

and magnet

7

.

• Check the distance between

the magnet and sensor (max.

0.08" (2mm)) as well as the

distance and angle between

the bicycle computer

1

and

sensor (90°/max. 23" (60cm)).

• Check the battery

9

and

10

of the bicycle computer and

sensor.

• Replace the battery.

Incorrect speed measurement:

• Check the setting of the tire

circumference.

• Check the kilometers/miles

setting.

• Check the alignment of the

sensor and magnet.

Black display:

• Check whether the display

2

has become too hot. Allow it to

cool down.

Display shows irregular digits:

• Remove the battery and insert

it again while making sure

that the polarity is correct.

Weak or no display:

• Check that the battery is prop-

erly inserted.

• Replace the battery.

Technical data

Model: 22967

Operating voltage: 3 V

Sensor battery: CR2032

Computer battery: CR2016

Protection class: IP44

Weight: approx.

0.13lb (57g)

Dimensions

(W × D × H):

1.5 × 2.4 ×

0.6" (3.9 ×

6.2 × 1.5cm)

Article number: 95698

Disposal

Disposing of the

packaging

− Sort the packaging before you

dispose of it. Dispose of paper-

board and cardboard with the

recycled paper service and

wrappings with the appropri-

ate collection service.

Disposing of the bicycle

computer

− Should the bicycle computer

no longer be capable of being

used at some point in time,

dispose of it in accordance

with the regulations in force

in your city or state.

− Please ensure your recycling

information applies to local

regulations and the EPA rec-

ommendations

(www.epa.gov).

Batteries and rechargeable

batteries must not be dis-

posed of with household

waste!

As the end user you are required

by law to bring all batteries

and rechargeable batteries,

regardless whether they contain

harmful substances* or not, to a

collection point run by the com-

munal authority or borough or

to a retailer, so that they can be

disposed of in an environmen-

tally friendly manner.

The battery must be removed

from the bicycle computer be-

fore disposal.

*labelled with: Cd = cadmium,

Hg = mercury, Pb = lead

zur Freigabe/Korrektur_V8

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Bikemate 22967 Cycling Computer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bikemate. They might be able to provide an original manual. Are you looking for the manual of your Bikemate 22967 Cycling Computer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Bikemate Cycling Computers
More manuals of Cycling Computers

Frequently Asked Questions about Bikemate 22967 Cycling Computer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Bikemate T52432 Cycling Computer

Manual

Bikemate E83005 Cycling Computer

Manual

Bikemate MCP 30102 Cycling Computer

Manual

Bikemate 22970 Cycling Computer

Manual

Blackburn Atom SL 6.0 Cycling Computer

Manual

Echowell BL 12W Cycling Computer

Manual

Crivit IAN 275091 Cycling Computer

Manual

Mio Cyclo Discover Plus Cycling Computer

Related categories