Home > Household appliances > Cooker Hoods > Zephyr Cooker Hoods > Zephyr ZSP-E42DS Siena Pro Cooker Hood

Manual Zephyr ZSP-E42DS Siena Pro Cooker Hood

Need a manual for your Zephyr ZSP-E42DS Siena Pro Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Siena Pro Use, Care, and Installation Guide

SIENA PRO

WALL

CORE

Safety Information

Operation

► Always leave safety grilles and ﬁlters in place. Without these components, operating blowers could catch onto hair, ﬁngers and

loose clothing.

► The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,

maintenance and suitable use of the product. The manufacturer further declines all responsibility for injury due to negligence and

the warranty of the unit automatically expires due to improper maintenance.

NOTE: Please check www.zephyronline.com for revisions before doing any custom work.

Electrical Requirements

Important:

► Observe all governing codes and ordinances.

► It is the customer’s responsibility to be aware of these below:

► To contact a qualiﬁed electrical installer.

► To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 latest

edition* or CSA standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and all local codes

and ordinances.

► If codes permit and a separate ground wire is used, it is recommended that a qualiﬁed electrician determine that the ground path

is adequate.

► Do not ground to a gas pipe.

► Check with a qualiﬁed electrician if you are not sure the range hood is properly grounded.

► Do not have a fuse in the neutral or ground circuit.

► This appliance requires a 120V 60Hz electrical supply and connected to an individual properly grounded branch circuit protected

by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire with ground. Please also refer to Electrical Diagram

on product.

► A cable locking connector (not supplied) might also be required by local codes. Check with local requirements, purchase and

install appropriate connector if necessary.

* National Fire Protection Association Batterymarch Park, Quincy, Massachusetts 02269

** CSA International 8501 East Pleasant Valley Road, Cleveland, Ohio 44131-5575

Federal Communication Commission Interface Statement

► This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

► This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following

measures:

► Reorient or relocate the receiving antenna.

► Increase the separation between the equipment and receiver.

► Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

► Consult the dealer or an experienced radio/TV technician for help.

READ AND SAVE THESE INSTRUCTIONS

Rating

Let us know what you think about the Zephyr ZSP-E42DS Siena Pro Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Zephyr ZSP-E42DS Siena Pro Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Zephyr ZSP-E42DS Siena Pro Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Zephyr ZSP-E42DS Siena Pro Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Zephyr. They might be able to provide an original manual. Are you looking for the manual of your Zephyr ZSP-E42DS Siena Pro Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Zephyr
Model	ZSP-E42DS Siena Pro
Category	Cooker Hoods
File type	PDF
File size	3.28 MB

All manuals for Zephyr Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Zephyr ZSP-E42DS Siena Pro Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1230) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (657) Read more