Home > Do-It-Yourself > Bench Grinders > Zenit Bench Grinders > Zenit ZST-150/350 Bench Grinder

Manual Zenit ZST-150/350 Bench Grinder

Need a manual for your Zenit ZST-150/350 Bench Grinder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

GENERAL SAFETY PRECAUTIONS

WARNING! When using electric tools, basic safety precautions should always be fol-

lowed to reduce the risk of re, electric shock and personal injury, including the following.

Read all these instructions before operating this product and save these instructions.

For safe operations:

1. Keep work area clean. Cluttered areas and benches invite injuries.

2. Consider work area environment. Do not expose power tools to rain. Do not use

power tools in damp or wet locations. Keep work area well lit. Do not use power tools where

there is risk to cause re or explosion.

3. Guard against electric shock. Avoid body contact with earthed or grounded surfaces.

(e.g. pipes, radiators, ranges, refrigerators).

4. Keep children and inrm persons away. Do not let visitors touch the tool or exten-

sion cord. All visitors should be kept away from work area.

5. Store idle tools. When not in use, tools should be stored in a dry, high or locked up

place, out of reach of children and inrm persons.

6. Do not force the tool. It will do the job better and safer at the rate for which it was

intended.

7. Use the right tool. Do not force small tools or attachments to do the job of a heavy

duty tool. Do not use tools for purposes not intended.

8. Dress properly. Do not wear loose clothing or jewelry; they can be caught in moving

parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear

protecting hair covering to contain long hair.

9. Use eye protection. Also use face or dust mask if the cutting operation is dusty.

10. Connect dust extraction equipment. If devices are provided for the connection of

dust extraction and collection facilities ensure these are connected and properly used.

11. Do not abuse the cord. Never carry the tool by the cord or yank it to disconnect it

from the receptacle. Keep the cord away from heat, oil and sharp edges.

12. Secure work. Use clamps or a vise to hold the work. It is safer than using your hand

and it frees both hands to operate tool.

13. Do not overreach. Keep proper footing and balance at all times.

14. Maintain tools with care. Keep cutting tools sharp and clean for better and safer

performance. Follow instructions for lubrication and changing accessories. Inspect tool cords

periodically and if damaged, have it repaired by authorized service center. Inspect extension

cords periodically and replace, if damaged. Keep handles dry, clean, and free from oil and

grease.

15. Disconnect tools. When not in use, before servicing, and when changing accessories

such as blades, bits and cutters.

16. Remove adjusting keys and wrenches. Form the habit of checking to see that keys

and adjusting wrenches are removed from the tool before turning it on.

17. Avoid unintentional starting. Do not carry a plugged in tool with a nger on the

Rating

Let us know what you think about the Zenit ZST-150/350 Bench Grinder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Zenit ZST-150/350 Bench Grinder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Zenit ZST-150/350 Bench Grinder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Zenit ZST-150/350 Bench Grinder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Zenit. They might be able to provide an original manual. Are you looking for the manual of your Zenit ZST-150/350 Bench Grinder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Zenit
Model	ZST-150/350
Category	Bench Grinders
File type	PDF
File size	0.66 MB

All manuals for Zenit Bench Grinders
More manuals of Bench Grinders

Frequently Asked Questions about Zenit ZST-150/350 Bench Grinder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more