Home > Household appliances > Cooker Hoods > Zanussi Cooker Hoods > Zanussi ZHT921W Cooker Hood

Manual Zanussi ZHT921W Cooker Hood

Need a manual for your Zanussi ZHT921W Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

www.zanussi.com

Recommendations

and suggestions

• The Instructions for Use apply

to several versions of this ap-

pliance. Accordingly, you may

nd descriptions of individual

features that do not apply to

your specic appliance.

• The manufacturer will not be

held liable for any damages

resulting from incorrect or

improper installation.

• The minimum safety distance

between the cooker top and

the extractor hood is 650 mm

(some models can be installed

at a lower height, please refer

to the paragraphs on working

dimensions and installation).

• Check that the mains voltage

corresponds to that indicated

on the rating plate xed to the

inside of the hood.

• For Class I appliances, check

that the domestic power supply

guarantees adequate earthing.

Connect the extractor to the

exhaust ue through a pipe

of minimum diameter 120 mm.

The route of the ue must be

as short as possible.

• Do not connect the extractor

hood to exhaust ducts carrying

combustion fumes (boilers,

replaces, etc.).

• If the extractor is used in

conjunction with non-electrical

appliances (e.g. gas burning

appliances), a sufcient degree

of aeration must be guaranteed

in the room in order to pre-

vent the backow of exhaust

gas. The kitchen must have

an opening communicating

directly with the open air in

order to guarantee the entry

of clean air. When the cooker

hood is used in conjunction

with appliances supplied with

energy other than electric,

the negative pressure in the

room must not exceed 0,04

mbar to prevent fumes being

drawn back into the room by

the cooker hood.

• The air must not be discharged

into a ue that is used for ex-

hausting fumes from applianc-

es burning gas or other fuels

(not applicable to appliances

that only discharge the air back

into the room).

• In the event of damage to

the power cable, it must be

replaced by the manufacturer

or by the technical service de-

partment, in order to prevent

any risks.

• If the instructions for installa-

tion for the gas hob specify

a greater distance specied

above, this has to be taken

into account. Regulations

concerning the discharge of

air have to be fullled.

• Use only screws and small

parts in support of the hood.

Warning: Failure to install

the screws or xing device in

accordance with these instruc-

tions may result in electrical

hazards.

• Connect the hood to the mains

through a two-pole switch hav-

ing a contact gap of at least

Rating

Let us know what you think about the Zanussi ZHT921W Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Zanussi ZHT921W Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Zanussi ZHT921W Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Zanussi ZHT921W Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Zanussi. They might be able to provide an original manual. Are you looking for the manual of your Zanussi ZHT921W Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Zanussi
Model	ZHT921W
Category	Cooker Hoods
File type	PDF
File size	24.54 MB

All manuals for Zanussi Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Zanussi ZHT921W Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1214) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (635) Read more