Home > Do-It-Yourself > Heat Guns > Yellow Jacket Heat Guns > Yellow Jacket 69092 Heat Gun

Manual Yellow Jacket 69092 Heat Gun

Need a manual for your Yellow Jacket 69092 Heat Gun? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Important Safety

Instructions

Before starting work please take a few

minutes to carefully and thoroughly read

all instructions. For safe operation, pay

close attention to safety guidelines and

warnings included for your protection.

Save these instruction for future use.

WARNING

• Never use the heat gun near flam-

mable materials or gases.

• Never obstruct the hot airflow by

blocking or covering the air outlet.

Never touch the hot air nozzle. It

becomes extremely hot.

• Do not force the tool or accessories

and use only for the purpose intend-

ed.

• Keep the gun and handle dry, clean,

and free from oil, grease and water.

• Always stand gun in an upright po-

sition or hang it up by its convenient

hanger.

• Always allow the heat gun to cool

down completely before storing it.

• Guard against electric shock by pre-

venting contact with grounded sur-

faces (for example: pipes, radiators,

ranges, refrigerator enclosures).

• Never carry the gun by its power

cord or yank the cord from an elec-

trical outlet. Inspect tool cord peri-

odically for damage.

• Disconnect the tool when not in use.

POWER INFORMATION

Be sure the power supply agrees with

the nameplate on the HEAT GUN (see

table to right). Voltage decreases greater

than 10% can cause loss of power and

possible overheating. The tool is double

insulated for added safety. Double insu-

lation does not take the place of normal

safety precautions.

Extension Cords

When selecting extension cords, use

only UL-approved extension cords in all

cases. Those stamped "W-A" are suita-

ble for outdoor use. See wire size chart

below:

Operation

The 69092 HEAT GUN is very light and

easy to use. The heat control allows for

low and high working temperature set-

tings as well as an off setting.

Before plugging into the electrical out-

let, always make certain the power

switch is in the OFF position.

When ready to begin work, set power

switch to desired temperature setting.

With the HEAT GUN, always allow a

minute or so for it to reach its full oper-

ating temperature. Always wear protec-

tive gloves and eye protection.

The HEAT GUN is designed with a built

-in stand so it can be positioned in an

upright (vertical) position only, on any

flat, level surface. This frees both hands.

Remember to keep hands away from the

immediate nozzle area.

Minimum Wire Size (AWG) for Extension Cords

Used with Power Tools Having 10 to 13 Amp Ratings

Total Length of

Extension Cord

in feet

100

125

150

Wire Size

Gauge

16 16 14 14 14 12

Applications

VACUUM AC&R SYSTEMS

Heat guns or heat lamps used on the

outside of AC&R Systems bring the

moisture inside into a vapor state so it

can be removed from the system. Heat

applied to the system oil reservoir will

allow trapped gasses to boil off. Heat

applied to areas where moisture collects

will turn it to vapor much faster. Heating

will generally increase the speed of a

vacuum and also allow you to pull a

deeper more complete vacuum.

PIPE THAWING

The heat gun can be very useful for

thawing or heating frozen water pipes in

a residential or commercial application.

The following safety precautions, how-

ever, must be observed.

• A heat gun is capable of reaching

high temperatures and therefore

should not be used in close

proximity of combustible, low

melting or deforming temperature

materials.

• Do not use a heat gun on plastic or

other non-metallic pipe or tubing

material. The heat gun can melt and

deform plastics while giving off

toxic fumes, detrimental to your

health.

• Keep the heat gun in motion while

heating pipes. Concentrating heat in

one area can affect the joint seals,

and heating too close to a soldered

joint could loosen the union.

Not recommended for thawing PVC

piping.

Other Jobs for the

YELLOW JACKET

Heat Gun

• Shrinking PVC shrink-wrap sheet-

ing for packaging protection.

• Shrinking polyvinyl wire joints.

• Removing self-adhesive stickers

and trim.

• Thawing frozen door locks, pad-

locks, etc.

• Loosening rusted or over tightened

nuts and metal screws.

• Removing paint and varnish with

hot air jet and scraper.

• Fast drying of paints and varnishes.

This is especially useful when color

matching is required by adding sev-

eral coats of the paint or varnish.

• Softening old putty before removal

and replacement.

• Waxing and de-waxing skis.

UPC# 69092

Description

Heat Gun Kit

120V

Voltage

120V - 60 Hz

Input

1200 Watts

Operating Temperature

Low 750°F

High 1100°F

Cord length

6 feet

Approvals

UL, CSA

Rating

Let us know what you think about the Yellow Jacket 69092 Heat Gun by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Yellow Jacket 69092 Heat Gun?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Yellow Jacket 69092 Heat Gun. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Yellow Jacket 69092 Heat Gun. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Yellow Jacket. They might be able to provide an original manual. Are you looking for the manual of your Yellow Jacket 69092 Heat Gun in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Yellow Jacket
Model	69092
Category	Heat Guns
File type	PDF
File size	0.65 MB

All manuals for Yellow Jacket Heat Guns
More manuals of Heat Guns

Frequently Asked Questions about Yellow Jacket 69092 Heat Gun

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What are the signs of a heat gun malfunction? Verified

Signs of a heat gun malfunction include a lack of heat, a decrease in heat output, an unusual smell, or sparks coming from the heat gun. If you notice any of these signs, unplug the heat gun and stop using it.

This was helpful (51) Read more

How can I prevent damage to the surface I am using the heat gun on? Verified

To prevent damage to the surface, it is important to keep the heat gun moving and to hold it at the proper distance from the surface. Also, It is advisable to use a lower temperature setting when working with delicate materials and to use a heat-resistant shield.

This was helpful (41) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (8) Read more