Manual Yamaha DHR10 Speaker

Manual

4

• Do not place the product in a location where it may come into

contact with corrosive gases or salt air. Doing so may result in

malfunction.

• Before moving the product, remove all connected cables.

• When transporting or moving the DHR15, always use two or

more people. Attempting to lift the product by yourself may

result in injuries, such as back injuries, or cause the product

to be dropped and broken, which could lead to other injuries.

• Do not use the speaker’s handles for suspended installation.

Doing so can result in damage or injury.

• Do not hold the bottom of the product when transporting or

moving it. In doing so, you may pinch your hands under the

product, and result in injury.

• Do not press the rear panel of the product against the wall.

Doing so may cause the plug to come in contact with the wall

and detach from the power cord, resulting in short circuiting,

malfunction, or even fire.

• Always consult qualified Yamaha service personnel if the

product installation requires construction work.

Improper installation might cause accidents, injuries,

damage or malfunction of this product.

Maintenance

• Remove the power plug from the AC outlet when cleaning the

product.

Handling caution

• Do not insert your fingers or hands in any gaps or openings

on the product (ports).

• Do not rest your weight on the product or place heavy objects

on it.

• Do not operate the product if the sound is distorting.

Prolonged use in this condition could cause overheating and

result in fire.

(rear_en_01)

NOTICE

To avoid the possibility of malfunction/damage to the product or

damage to other property, follow the notices below.

 Handling and maintenance

• Do not use the product in the vicinity of a TV, radio, or other

electric products. Otherwise, the product, TV, or radio may

generate noise.

• Do not expose the product to excessive dust or vibration,

or extreme cold or heat, in order to prevent the possibility

of panel disfiguration, unstable operation, or damage to

the internal components.

• Do not install in locations where temperature changes are

severe. Otherwise, condensation may form on the inside or

the surface of the product, causing it to break or deform

the wood. Do not leave condensation on the wood; wipe

immediately with a soft cloth.

• If there is reason to believe that condensation might have

occurred, leave the product for several hours without turn-

ing on the power until the condensation has completely

dried out, in order to prevent possible damage.

• Do not touch the speaker driver unit, since it might cause

malfunction.

• Air blowing out of the bass reflex ports (hole or holes at

the front) is normal, and often occurs when the speaker is

handling program material with heavy bass content.

• Do not place the speaker face down.

• When cleaning the product, use a dry and soft cloth. Do

not use paint thinners, solvents, cleaning fluids, or chemi-

cal-impregnated wiping cloths, since this might cause

alteration or discoloration.

• Always turn the power off when the device is not in use.

Information

 About functions/data bundled with the prod-

uct

• Even when the [ / ] (power) switch is in standby status

(POWER indicator is off), electricity is still flowing to the

product at the minimum level. When you are not using the

product for a long time, make sure you unplug the power

cord from the wall AC outlet.

• XLR-type connectors are wired as follows (IEC60268 stan-

dard): pin 1: ground, pin 2: hot (+), and pin 3: cold (–).

 About this manual

• The illustrations as shown in this manual are for instruc-

tional purposes only.

• The company names and product names in this manual

are the trademarks or registered trademarks of their

respective companies.

• Software may be revised and updated without prior notice.

 About disposal

• This product contains recyclable components.

When disposing of this product, please contact the appro-

priate local authorities.

The model number, serial number, power requirements,

etc., may be found on or near the name plate, which is at

the rear of the unit. You should note this serial number in

the space provided below and retain this manual as a per-

manent record of your purchase to aid identification in the

event of theft.

Model No.

Serial No.

Yamaha cannot be held responsible for damage caused by

improper use or modifications to the product.

PA_en_12 2/2

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Yamaha DHR10 Speaker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Yamaha. They might be able to provide an original manual. Are you looking for the manual of your Yamaha DHR10 Speaker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Yamaha Speakers
More manuals of Speakers

Frequently Asked Questions about Yamaha DHR10 Speaker

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Yamaha Soavo-1 Piano Black Speaker

Manual

Yamaha NS-C700 Speaker

Manual

Yamaha NS-C444 Middle Speaker

Manual

Yamaha DHR12M Speaker

Manual

Yamaha NS-C444 Speaker

Manual

Yamaha Soavo-900C Speaker

Manual

Yamaha NS-F140 Speaker

Manual

Yamaha NS-B500 Bookshelf Speaker

Related categories